Eliminator Lighting Mini Par RGBW LED Manual

Eliminator Lighting Ikke kategoriseret Mini Par RGBW LED

Læs gratis den danske manual til Eliminator Lighting Mini Par RGBW LED (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Eliminator Lighting Mini Par RGBW LED, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Mini Par

RGBW LED

SPECIFICATIONS:

Model: Mini Par RGBW LED

Voltage: 100V-240V 50/60Hz

LEDs: 12 x 1W LEDs

(3 Red, 3 Green, 3 Blue,

& 3 White LEDs)

Beam Angle: 25 Degrees

Power Consumption: 14W

Weight: 1lbs./ 0.5kgs.

Size: 153 x 145 x 95mm

Working Position: Any Safe position

Duty Cycle: None

DMX Channels: 3 DMX Channel Modes:

4/6/8 Channels

Colors: RGBW

Warranty: 1 Year

CAUTION! Please read and under-

stand these instructions before

installing or operating this unit.

Operating Instructions:

The Mini Par RGBW LED has been tested at the factory, there is no assembly required. The unit is

ready to be plugged into a power outlet. This unit has 3 DMX channel modes; 4/6/8 channels. It has

6 operating modes; RGBW Dimmer mode, Jump change mode, Fade mode, Pulse change mode,

Sound Active mode, or DMX mode.

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

Caution! Never open unit when in use. Always

disconnect main power before replacing fuse.

Remember to always replace with the exact same

type fuse.

1 ear Limited Warranty:Y Eliminator Lighting warranty is valid from the date of purchase. Our

1 year limited warranty covers manufacturing defects onl . Serial numbe , place of purchase with y r

dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover

items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty

is only valid with-in the United States.

Customer Support: Office: (800) 322-6337

Fax: (323) 582-2941

Web: support@eliminatorlighting.com

DMX Mode:

Operating through a DMX controller give the user the freedom to create own programs tailored s their

to their own individual needs. The Mini Par RGBW LED has 3 DMX channel modes; 4/6/8 channels.

See the chart below for the DMX traits and values.

1. This function will allow you to control each individual fixture’s traits with a standard DMX 512

controller.

2. To run your fixture in DMX mode press the MENU button until “Addr” is displayed. “A.XXX” will

now be displayed. “XXX” represents the current displayed address. Use the UP or DOWN

buttons to select your desired DMX address.

3. Press ENTER again to select your desired DMX channel mode. Use the UP and DOWN buttons

to find your desired DMX channel mode.

4. After you have chosen your desired DMX address and DMX channel mode, press ENTER and

plug in the fixture via the XLR connections to any standard DMX controller.

Jump Change Mode:

1. Plug the fixture in and press the MENU button until “ASC -” is displayed.

2. Press the ENTER button to adjust the Jump speed. Use the UP and DOWN buttons to adjust the

speed. The speed can be adjusted between “AS.00” (slowest) to “AS.12” (fastest).

3. After you have adjusted the program speed you can activate strobing by pressing the MENU

button until “FLAS” is displayed and press ENTER. The Flash can be adjusted between “FL.00”

(flash off) to “FL.12” (fastest flash).

Pulse Change Mode:

1. Plug the fixture in and press the MENU button until “ACC -” is displayed.

2. Press the ENTER button to adjust the Pulse speed. Use the UP and DOWN buttons to adjust the

speed. The speed can be adjusted between “AC.00” (slowest) to “AC.12” (fastest).

3. After you have adjusted the pulse speed you can activate strobing by pressing the MENU button

until “FLAS” is displayed and press ENTER. The Flash can be adjusted between “FL.00”

(flash off) to “FL.12” (fastest flash).

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

Operating Mode

A r A.001-512 4/6/8-Ch DMX a ress/cha el de dd dd nn mo

ASC- AS.00-12 Jump change de/speed mo

ACC- AC.00-12 Pulse change de/speed mo

FAde FA.00-12 change/speedFade

SOUF SF.00-12 Pulse change o control/sensitiveness s und

rL-- rL.00-12 Red brightness adjustable

gL-- gL.00-12 green brightness adjustable

bL-- bL.00-12 Blue brightness adjustable

uL-- uL.00-12 white brightness adjustable

FLAS FL.00-12 Strobe peed s

Menu Submenu Channels

Produkt Specifikationer

Mærke:	Eliminator Lighting
Kategori:	Ikke kategoriseret
Model:	Mini Par RGBW LED

Har du brug for hjælp?

Hvis du har brug for hjælp til Eliminator Lighting Mini Par RGBW LED stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Eliminator Lighting Manualer

Eliminator Lighting MBMHD1 Manual

30 Maj 2025

Eliminator Lighting Furious Three RG UV Manual

28 December 2024

Eliminator Lighting SC8 II PAD SYSTEM Manual

19 November 2024

Eliminator Lighting Bubbletron EX Go Manual

4 September 2024

Eliminator Lighting Mister Kool EP Manual

3 September 2024

Eliminator Lighting BUBBLETRON EX Manual

3 September 2024

Eliminator Lighting UVLED 48EL Manual

3 September 2024

Eliminator Lighting Micro Galaxian Three Manual

3 September 2024

Eliminator Lighting VF Snow Flurry HO EP Manual

3 September 2024

Eliminator Lighting BUBBLETRON EXL Manual

3 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Tripp Lite Protect It! TLP606 Manual

30 Juli 2025

AMX NMX-WP-N2510 Manual

30 Juli 2025

Yealink SIP-T23G Manual

30 Juli 2025

Rothenberger ROBEND 4000 Manual

30 Juli 2025

Tripp Lite SUPDMB710 Manual

30 Juli 2025

Tripp Lite IBAR6ULTRAUSBB Manual

30 Juli 2025

Advantech PCM-34R1TP Manual

30 Juli 2025

Tripp Lite SRIN4141410 Manual

30 Juli 2025

Tripp Lite TLM609GF Manual

30 Juli 2025

Tripp Lite Protect It! TLP368CUBEUAM Manual

30 Juli 2025