Elkay MP20 Manual

Elkay Ikke kategoriseret MP20

Læs gratis den danske manual til Elkay MP20 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Elkay MP20, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

FOR PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR CALL 1.800.323.0620

97696C (Rev. A - 1/01)

1. Remove mounting plate from packaging. Read this instruction sheet before proceeding.

These dimensions are required to obtain proper rim and bubbler heights for compliance with

ANSI standard A117.1.

2. Install plumbing rough-ins as per fountain instructions (supplied with fountain).

3. Install (2) 1/4” (6mm) screws (not provided) into wall at 43 5/8” above nished oor. Use the two best hole

locations for your application. Hang mounting plate on these screws and level mounting plate before tightening

screws.

4. Reinforce the wall in shaded areas for framed wall construction so that it will adequately support

the water fountain. This reinforcement must support up to 300 lbs static load and provide a means

for securing the mounting plate in place.

5. Attach mounting plate to finished wall surface with (12) 5/16” x 2” long bolts and flat washers, 6 per bracket

(not provided). Tighten securely. (Fastener must match wall type, i.e. lag screws for wood studs, bolts and

anchors for masonary construction.)

MP20 MOUNTING PLATE INSTRUCTIONS

FOR PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR CALL 1.800.323.0620

97696C (Rev. A - 1/01)

MP20RA MOUNTING PLATE INSTRUCTIONS

1. Remove mounting plate from packaging. Read this instruction sheet before proceeding.

These dimensions are required to obtain proper rim and bubbler heights for compliance with

ANSI standard A117.1.

2. Install plumbing rough-ins as per fountain instructions (supplied with fountain).

3. Install (2) 1/4” (6mm) screws (not provided) into wall at 43 5/8” above nished oor. Use the two best hole

locations for your application. Hang mounting plate on these screws and level mounting plate before tightening

screws.

4. Reinforce the wall in shaded areas for framed wall construction so that it will adequately support

the water fountain. This reinforcement must support up to 300 lbs static load and provide a means

for securing the mounting plate in place.

5. Attach mounting plate to finished wall surface with (12) 5/16” x 2” long bolts and flat washers, 6 per bracket

(not provided). Tighten securely. (Fastener must match wall type, i.e. lag screws for wood studs, bolts and

anchors for masonary construction.)

Produkt Specifikationer

Mærke:	Elkay
Kategori:	Ikke kategoriseret
Model:	MP20

Har du brug for hjælp?

Hvis du har brug for hjælp til Elkay MP20 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Elkay Manualer

21 August 2025

6 September 2024

6 September 2024

6 September 2024

5 September 2024

5 September 2024

5 September 2024

5 September 2024

Elkay LKBG2616SS Manual

19 August 2024

Elkay LKWBG2816SS Manual

19 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Envertec EVT400-B Manual

21 August 2025

Simrad S5100 Manual

21 August 2025

Noyafa NF-468 Manual

21 August 2025

Noyafa NF-8509 Manual

21 August 2025

SolaX Power T-BAT HS14.4 Manual

21 August 2025

Pioneer FH-S720BT Manual

21 August 2025

Noyafa NF-911C Manual

21 August 2025

Growatt MOD3-10KTL3-XH Manual

21 August 2025

Metra 82-8705 Manual

21 August 2025

Nordic Winter 780-115 Manual

21 August 2025