Emos P5682 Manual

Emos Termostat P5682

Læs gratis den danske manual til Emos P5682 (24 sider) i kategorien Termostat. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Emos P5682, eller vil du spørge andre brugere om produktet?

Side 1/24
2101104000_31-P5682_00_01_WEB 105 × 148 mm
P5682
GB Capillary Sensor Thermostat
CZ Termostat s kapilárovým čidlem
SK Termostat s kapilárovým čidlom
PL Termostat z czujnikiem kapilarnym
HU Kapilláris érzékelővel ellátott termosztát
SI Termostat s kapilarnim senzorjem
RS|HR|BA|ME Termostat s kapilarnim osjetnikom
DE Thermostat mit Kapillarfühler
UA Термостат з капілярним датчиком
RO|MD Termostat cu senzor capilar
LT Termostatas su kapiliariniu jutikliu
LV Kapilārais termostats ar sensoru
EE Kapillaaranduriga termostaat
BG Термостат с капилярен датчик
FR Thermostat capillaire
IT Termostato con sensore capillare
ES Termostato con sensor capilar
NL Thermostaat met capillaire voeler
www.emos.eu
2
GB | Capillary Sensor Thermostat
Operating Instructions and Installation
Description
Capillary Sensor Thermostat with a visible external scale.
Easy to operate thanks to the large manual dial.
Temperature range 0 °C – 90 °C (tolerance 5 °C).
Easy electrical connection thanks to the suciently large cable clamps.
Installation
1. Thermostat to be mounted to the pipes surface, attach to any place and secure the external sensor
on thesurface of the system designated for the water transfer, where the temperature is supposed
to be measured. Observe the direct and safe contact with the surface. (Any insulation must be
removed from the spot where the sensor is going to be mounted.)
2. The Capillary pipe located between the thermostat and the external sensor must not be curved
(bent) in any case!
Electric Connection
1. Open the thermostat by pulling out the dial (1) and then release the large plastic screw (2).
2. Remove the lid from the case. Now you see the four plastic clamps, these must be connected in
the following way:
Clamp C and 1 = opener
3. The thermostat will be opened as the temperature is increasing and will be closed as the temperature
decreases (E. g. function = „Heating“).
Clamp C and 2 = opener
4. The thermostat will be closed as the temperature is increasing and will be opened as the temperature
is decreasing (E. g. function = „Cooling“).
Clamp = Grounding
The installation may be done by the professional heating technician only and in the accordance with the
connection plan. Moreover, the installation must comply the currently valid regulations and must comply
as well as the specications issued by your energy supplier. The installation must always be done when
the electricity supply is switched o. All the safety specications must be observed.
Observe the maximum switching current stated in the technical specications!
Technical Specications
Operating Voltage: 230 V AC 50 Hz, 400 V AC 50 Hz
Contact: 1 two-way contact
Switching Current: 16 (4) A – 230 V, 6 (1) A – 400 V
Temperature Controlling Range: 0 °C – 90 °C
Sensor Unit: liquid sensor
Coverage: IP40


Produkt Specifikationer

Mærke: Emos
Kategori: Termostat
Model: P5682

Har du brug for hjælp?

Hvis du har brug for hjælp til Emos P5682 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Termostat Emos Manualer

Emos

Emos P5640S Manual

2 September 2024
Emos

Emos P5685 Manual

28 August 2024
Emos

Emos P5686 Manual

28 August 2024
Emos

Emos P5601N Manual

25 August 2024
Emos

Emos P5611OT Manual

13 August 2024
Emos

Emos P5681 Manual

7 August 2024
Emos

Emos P5683 Manual

31 Juli 2024
Emos

Emos P56201UF Manual

30 Juli 2024
Emos

Emos P56201 Manual

28 Juli 2024
Emos

Emos P5682 Manual

26 Juli 2024

Termostat Manualer

Nyeste Termostat Manualer