Empire BeBa_25978 Manual

Empire Kran BeBa_25978

Læs gratis den danske manual til Empire BeBa_25978 (5 sider) i kategorien Kran. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Empire BeBa_25978, eller vil du spørge andre brugere om produktet?

Side 1/5
CODE: BeBa_25978
Empire Wall Mounted Bath Filler
2
1 NOTES FOR INSTALLATION
2)Please do not connect hot and cold water supply lines in reverse. This could result in hot water flowing from cold
line and cause scalding.
3)The feed-water temperature of water shall not exceed 85° °C. Exceeding 85 may cause scalding, the service life of
faucets might be shortened, or the faucet might be damaged.
4) The valve must be installed on the wall that is strong and thick enough.
5)After installation, please make sure the faucet is securely mounted.
WarningRead all the instructions completely before proceeding. We recommend calling a professional if
you are uncertain about installing this product.
1)Installation must be carried out in compliance with The Water Fittings Regulations and Scottish Water Byelaws.
Minimum and Maximum working pressure : 1 - 5 bar
2 DIMENSIONS(mm)
3 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are usually found under the sink or near the water meter.


Produkt Specifikationer

Mærke: Empire
Kategori: Kran
Model: BeBa_25978

Har du brug for hjælp?

Hvis du har brug for hjælp til Empire BeBa_25978 stil et spørgsmål nedenfor, og andre brugere vil svare dig