Sussex CBM-54 Manual

Sussex Kran CBM-54

Læs gratis den danske manual til Sussex CBM-54 (1 sider) i kategorien Kran. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Sussex CBM-54, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

5.0

litres per

minute

Licence No. 0124

In accordance with AS/NZS 6400

Sussex Taps Pty Ltd

WATER RATING

www.waterrating.gov.au

The more

stars the more

water efcient

Product code

Installation guidelines

Plumber note

Calibre

- The Mixer is supplied assembled, only the Fixing nut and the clamp need to be removed.

- After removing the mentioned parts, lower the Mixer on to the mounting surface and fit the Flexible Hoses.

- In some cases the Flexible Hoses may need to be fed through from under the mounting surface and then

attached. (Tighten using appropriate spanner)

- After securing the Flexible Hoses, fit Clamp and attach the Fixing Nut from underneath.

- Before fully securing the Mixer ensure that the Base O Ring is intact and the Mixer is properly centred over the

mounting surface hole.

- The Mixer mounting surface must be completely sealed and water-tight.

- The 1/2” Fittings of the Flexible Hoses have a conical seal, ensure that the matching threads are cut square

and burr free.

- Prior to connecting the Flexible Hoses, ensure all pipework is thoroughly flushed and ensure pipework is free of

any dirt or debri.

- Isolating Stop Valves are recommended with all installations.(not supplied)

- Connect the Flexible Hoses to Hot and Cold pipework fittings, ensure the Hoses do not kink or become twisted

when tightening.

- Check all fittings and connections are secure and water-tight.

- On-site testing using higher water pressures must be conducted with the Mixer in the closed position.

(STATIC TEST)

- Under no circumstances is the Mixer to be opened when exceeding the maximum stated water pressure.

- At the completion of testing, do not relieve any high water pressure by operating the Mixer.

- Exposing the internals of the Mixer Car tridge to higher than specified water pressures will void the

manufacturers warranty.

CBM Basin mixer

CEBM Extended basin mixer

Basin mixer

Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2003

Recommended working water pressure 300-500 kpa. Maximum water temperature is 65 deg.c

Produkt Specifikationer

Mærke:	Sussex
Kategori:	Kran
Model:	CBM-54

Har du brug for hjælp?

Hvis du har brug for hjælp til Sussex CBM-54 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kran Sussex Manualer

Sussex VSM-04 Manual

7 April 2025

Sussex CBM-54 Manual

7 April 2025

Sussex VSMQ-60 Manual

7 April 2025

Sussex VBM Manual

7 April 2025

Sussex RWBMS150RH Manual

7 April 2025

Sussex VSM-54 Manual

7 April 2025

Sussex VEBM120 Manual

31 August 2024

Sussex BWBMS210RH Manual

31 August 2024

Sussex RWBHS200RH Manual

31 August 2024

Sussex RBS Manual

31 August 2024

Kran Manualer

Nyeste Kran Manualer

Rohl Miscelo MI09D3GQMB Manual

7 April 2025

Shaws AUSH-4751 Manual

7 April 2025

Oliveri MT0039 Manual

7 April 2025

Shaws AUSH-4866 Manual

7 April 2025

Peerless-AV P299685LF Manual

5 April 2025

InSinkErator Lia Manual

3 Marts 2025

InSinkErator Juno Manual

3 Marts 2025

Ikea LUNDSKÄR 405.328.03 Manual

13 Februar 2025

Ikea LUNDSKÄR 205.326.15 Manual

15 Januar 2025

Billi Alpine 060 Manual

2 Januar 2025