Endorphin.es Running Order Manual

Endorphin.es Ikke kategoriseret Running Order

Læs gratis den danske manual til Endorphin.es Running Order (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Endorphin.es Running Order, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

download latest ﬁrmware for

RUNNING ORDER:

http://airways.endorphin.es

ENDORPHIN.ES® – RUNNING ORDER

Module design by Andreas Zhukovsky

Collection Spring/Summer 2021

Endorphin.es are made in Barcelona, Spain

Follow, like, post and tag us at instagram:

@endorphin.es

WARRANTY

RTFM – be so kind and read the manual. It will provide you with the information you need to fully indulge the module you justpurchased – for which we like to thank you.

Enjoy your sound experiences, dear sonic traveller. Beginning from the product's purchase date a 1-year warranty is guaranteed for each product in case of any manufacturing errors

or other functional deﬁciencies during runtime.

The warranty does not apply in case of:

• damage caused by misuse • mechanical damage arising from careless treatment (dropping, vigorous shaking, mishandling, etc.)

• damage caused by liquids or powders penetrating the device • heat damage caused by overexposure to sunlight or heating • electric damage caused by improper connecting

The warranty covers replacement or repair, as decided by us. Please contact us via email for a return authorization before sending anything. Shipping costs of sending a module back for

servicing is paid by the customer. Device complies with all EU regulations concerning RoHS lead-free manufacturing and WEEE disposal

Visit us:

http://endorphin.es

https://youtube.com/user/TheEndorphines

https://facebook.com/TheEndorphines

https://www.instagram.com/endorphin.es/

For technical requests: support@endorphin.es

For general requests: info@endorphin.es

FURTH BARCELONA, S.L.

VAT ID: ES B66836487

FIRMWARE UPDATE

Repeats I/II :

manual knobs

with CV inputs.

Set amount of active

trigger repeats or

Euclidean trigger ﬁlls

LISTEN TO THE HEART BEAT CAREFULLY

• 6 HP wide, 2-track trigger generator

• Zero-jitter clock generation: less than 50 microseconds internal clock jitter

• 101-style 16th note input mode (step/rest) with manual or CV controllable

amount of trigger repeats after the active trigger step happens.

• Euclidean mode enabled for each track, set total length and the number of ﬁlls

inside the Euclidean circle. Fill amount is also CV controllable.

• Individual reset inputs per track, reset for track 1 is normalled to reset of track 2

• Clock divider for incoming external clock allows to quickly obtain various

musical divisions on the ﬂy incl. triplets of course, but more importantly tuplet

mode lets you stretch the desired amount of trigger repeats into a single bar.

• Dedicated mute buttons for each track

• 8 patterns of trigger sequences stored in the module and will be recalled on

each power cycle.

Depth: 30 mm (with plugged in ribbon cable)

Power requirements: +12V: 30 mA, -12V: 10 mA

red/brown pair of wires correspond

to negative -12V power connector

connect to the

power bus board

POWER CONNECTION

back side of the module

connect to the module

from the back side

-12V / red stripe

polarity marking

- If in live mode, the buttons

are individual Track I and II

MUTE buttons.

- If in step record mode,

the buttons are used for

adding steps and rests.

- If in Euclidean record mode,

the buttons set the length

of the Euclidean circle

(+1 step pressing STEP and

+16 steps by pressing REST)

Rate/divider knob:

- if no clock cable is inserted, then

this knob sets the speed of the internal

clock in BPM, from 30 to 300;

- if clock is inserted via cable, this knob

sets the speed of dividers/tuplets for

the repeats.

When a CV cable is inserted,

each Repeats knob acts as CV

attenuator; expected CV range: 0...+5V

power OFF you modular system:

hold STEP while powering your system again:

you will see the illuminati LED

slowly blink :BLUE

WAV

with simple mono or stereo cable connect

audio output from your computer headphones

output to REPEAT 1 CV IN input of the module

Press PLAY and wait 2+ minutes.

Illuminati LED will quickly blink .BLUE

The modue will reboot automatically blinking

FUCHSIA LED after new ﬁrmware is installed

Disable alarms and notiﬁcations during

the update process as they will most likely

interupt the update procedure, ﬂight mode

on phones is recommended.

When Illuminati LED ﬂashes RED

that means signal is too low or too high:

Just reset the ﬁrmware update process by

pressing once and regulating the signal levelREST

with RATE knob: full CCW: 1x ampliﬁcation,

full CW: 10x ampliﬁcation).

Video update guide: https://youtu.be/WKt7FdRGRYI

External clock

input, 16th

notes clock

expected (PPQN24÷6)

(0...+5V or +10V,

0.65V threshold)

Reset/syncronization trigger inputs.

Each trigger applied resets a certain track’s

sequence to its ﬁrst step.

‘Reset in I’ is normalled to ‘reset in II’, if no

cable is inserted into ‘reset in II’.

Track selector switch:

- record a trigger sequence or set

the Euclidean length by switching

to the left (track I) or right (track II);

- playback live mode in the middle

Output Output Output

track I and II trigger outputs,

trigger output length: 10 msec

Output range: 0...+10V

LED indicator:

- blinking to BPM in blue in live mode;

- lights up red in step recording,

- fuchsia in euclidean recording

Clock output:

- internal clock out jack: 30...300 BPM in 16th notes

(PPQN24÷6) when no external clock applied;

- external clock output in 16th notes after divider;

Output range 0...+10V

Output Output

results in

5-step long

inﬁnitely repeating

trigger sequence:

OPERATING MODES

1.1 Recording the trigger sequence in step mode:

LED light up in standard step recording modeRED

if track selector is switched to the right or to the left

1.0 Step a.k.a. 'standard' mode

2.0 Euclidean mode

Record a trigger sequence to track I or II

using STEP and REST buttons Switching the

track select to the

middle

ﬁrst step of recorded

5-steps sequence ...

last step of

recorded sequence

buttons pressed 5 times in total

the recorded sequence will ﬁre triggers

on 1st, 2nd and 4th step

repeating the

same sequence

again repeating the same

sequence of triggers

and so on

x1 x1 x1 x1 x1

1.2 Repeats in step mode

x1 x2 ...

Record a simple 3 step trigger sequence

1 2 3 4 5

1 2 3

with REPEATS I knob set to 0:

Adjusting REPEATS amount will add 0-7 trigger repeats after an active step in the sequence, thus increasing the total sequence length:

1 2 3 4

...

original ﬁrst trigger

repeated trigger empty steps (rests) of the sequence

repeated same sequence

...

original ﬁrst trigger

x2 times repeated trigger empty steps (rests) of the sequence

repeated same sequence

again same

repeating sequence, etc.

1 2 3 4 5

With CV applied we can

dynamially change

amount of repeats

2 sec 2 sec

Holding STEP (for track 1) or REST (for track 2) button for 2 seconds will enable (or disable) Euclidean mode:

2.1. Recording the sequence length in Euclidean mode:

Switch to the left to check if track I is in Euclidean mode or switch to the right to check if track II is in Euclidean mode.

LED lighs up

FUCHSIA

LED lighs up

FUCHSIA

each single press adds

+1 step to the Euclidean circle

each single press adds

+16 steps to the Euclidean circle

switching to the center,

saves the steps amount

step 1

step 2

step 3

step 4

step 5

step 6

step 7

step 8

step 9

step 10

step 11

step 12

step 13

step 14

step 15

step 16 Euclidean circle with default

count of 16 steps

with REPEATS knob we set

the number of ﬁlls (active

steps equally distanced

within the euclidean circle)

With CV applied we can

dynamially change

the amount of ﬁlls

triggers 1

trigger

triggers

triggers etc.

...

3. Live mode

Short press on STEP or REST

buttons will mute/unmute trigger

outputs on either Track I or II

In live mode both tracks

inﬁnitely repeat their

trigger sequences. 4. Clock divider

With external clock applied, the

divider is set with rate/div knob

to be applied to trigger repeats

or Euclidean circle speed;

middle knob position (x1)

doesn't affect the clock divider.

6. Syncronization

In TUPLET mode (div knob fully CCW)

the number of trigger

repeats is streched into one bar.

Some particular cases of using tuplets

are triplets and – if used creatively –

becomes ratcheting.

5.Tuplets

clock output in 16th notes after divider

(PPQN24÷6)

Triggers applied to reset I or II

reset the according trigger sequence to the ﬁrst step.

Reset in I is normalled to reset in II.

I.e. a reset is applied to both tracks, if a signal

is sent to reset in I only and no cable is plugged

into reset in II.

7. Patterns

Each track has 8 patterns selected by pressing both the STEP and the REST button and rotating the REPEATS (I or II) knob

at the same time. Patterns can be combined and are selected separately for track I and II. Pattern sequences and

last patterns selected are recalled on next power cycle.

Track I or II

pattern 1 pattern 2 pattern 8pattern 7

...

pattern 1

pattern 2

pattern 3

pattern 4 pattern 5

pattern 6

pattern 7

pattern 8

separate patten selection

for track I and track II

1 21 2 3 4 5 1 2 3 4 5

1 2 3 1 2 3 1 2

1 2 3 4 1 2 1 2 3 4 5 1 2 3 4 5 1 2

In this mode we set the length of the Euclidean

circle (by default 16 steps) and set the amount

of trigger FILLS with REPEATS knob or its CV.

again same

repeating sequence, etc.

Produkt Specifikationer

Mærke:	Endorphin.es
Kategori:	Ikke kategoriseret
Model:	Running Order

Har du brug for hjælp?

Hvis du har brug for hjælp til Endorphin.es Running Order stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Endorphin.es Manualer

Endorphin.es Futhrrrr Generator Manual

14 August 2024

Endorphin.es Godspeed Manual

14 August 2024

Endorphin.es Blck_Noir Manual

12 August 2024

Endorphin.es Furthrrrr Manual

12 August 2024

Endorphin.es Godspeed Thru-Godspeed+ Multi-Output VCO Module Manual

12 August 2024

Endorphin.es Power Manual

11 August 2024

Endorphin.es Two Of Cups Manual

10 August 2024

Endorphin.es Blck_Noir CR-78 Manual

6 August 2024

Endorphin.es Godspeed+ Manual

28 April 2024

Endorphin.es Running Order Manual

30 December 2023

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Simrad Active Imaging HD (Thru-Hull) Manual

14 Juni 2025

Garritan Harps Manual

14 Juni 2025

Marshall CV-H20-HF Manual

14 Juni 2025

Aiphone IXW-MAA Manual

14 Juni 2025

Rival HM-743 Manual

14 Juni 2025

Lutec Avony Manual

14 Juni 2025

Giordani G-SAFE & PLAY Manual

14 Juni 2025

Gourmia GAF799 Manual

14 Juni 2025

Arendo 307503 Manual

14 Juni 2025

Hughes & Kettner Tube 100 Manual

14 Juni 2025