EPH Elektronik DLS 24/20/G Manual

EPH Elektronik Ikke kategoriseret DLS 24/20/G

Læs gratis den danske manual til EPH Elektronik DLS 24/20/G (18 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om EPH Elektronik DLS 24/20/G, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/18
Stand: September 2010 Z314 engl.
Technical specification
1-Q motor control unit digital type DLS 24/xx - 460
Table of contents
1. Brief instruction DLS/xx-460 with 6/4-pin spring clamp terminal
2. General information
2.1 Technical features
2.2 Accessories
3. Technical data
4. Connection
4.1 Control connections
4.2 Connection plan
5. Setting parameters
6. Scale drawings
6.1 DLS 24/xx/P
6.2 DLS 24/xx/M
6.3 DLS24/xx/G
7. Notes and recommendations on using EPH motor control cards
7.1 Delivery
7.2 Installation, launch and safety measures
7.3 EMC measures
7.4 Low voltage directive 73/23 EEC
7.5 Motors with capacity fault clearance
8. Manufacturer’s declaration
Copyright © EPH-Elektronik GmbH. All rights reserved. We claim property rights and
copyright. It may be duplicated or used in any other way with our express confirmation
only.
Stand: September 2010 Z314 engl.
1. Brief instruction DLS/xx-460 with 6/4-pin spring clamp terminals
1. Select modes:
• put jumper 1 on 1-2 for internal reference value (potentiometer 1) or on 2-
3 for external reference.
• put jumper 2 on 1-2 for 12V motor or on 2-3 for 24V motor.
• put jumper 3 on 1-2 for reference value max. 5V or on 2-3 for 10V target
value input.
• put jumper 4 on 1-2 for internal controller enable or 2-3 for external
controller enable (terminal 4).
2. Turn potentiometer 2 (Imax) for current limitation to the right position.
3. Potentiometer 3 (IxR) compensation to left position.
4. Connection of the control wires see Connection plan, page 5.
5. Connect DC motor to terminals 7 and 8.
6. Connect power supply to terminal 9 GND, to terminal 10 plus (approx. 12 – 36 V DC).
7. Now turn on power supply.
8. LED green (power on) illuminates on the pcb.
9. With potentiometer 1 (n ref) the target value for motor speed can be adjust from 0
to 100%, if jumper 1 was put on 1-2.

Produkt Specifikationer

Mærke: EPH Elektronik
Kategori: Ikke kategoriseret
Model: DLS 24/20/G

Har du brug for hjælp?

Hvis du har brug for hjælp til EPH Elektronik DLS 24/20/G stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret EPH Elektronik Manualer

EPH Elektronik

EPH Elektronik DGS 24/03 M DC Manual

21 August 2024
EPH Elektronik

EPH Elektronik DLS 24/10/G Manual

21 August 2024
EPH Elektronik

EPH Elektronik GS24S/06/M/DW DC Manual

20 August 2024
EPH Elektronik

EPH Elektronik GS24S/10/M/DW DC Manual

20 August 2024
EPH Elektronik

EPH Elektronik DLR 24/05/M Manual

20 August 2024
EPH Elektronik

EPH Elektronik GS24S/03/M/DW DC Manual

19 August 2024
EPH Elektronik

EPH Elektronik DLR 24/10/M Manual

18 August 2024
EPH Elektronik

EPH Elektronik GS24S/03/P DC Manual

18 August 2024
EPH Elektronik

EPH Elektronik DLS 24/10/P Manual

18 August 2024
EPH Elektronik

EPH Elektronik GS24S/06/P DC Manual

18 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive

Playtive IAN 332975 Manual

16 Juni 2025
Playtive

Playtive HG05527 Manual

16 Juni 2025
Philips

Philips 75PUH6393 Manual

16 Juni 2025
Foster

Foster Slimline FSL400L Manual

16 Juni 2025
Playtive

Playtive HG04098 Manual

16 Juni 2025
Aiphone

Aiphone JPW-BA Manual

16 Juni 2025
Life On Products

Life On Products LCAF020 Manual

16 Juni 2025
Hager

Hager CEA263U Manual

16 Juni 2025
Moulinex

Moulinex Illico DJE241 Manual

16 Juni 2025
Foster

Foster Slimline FSL800M Manual

16 Juni 2025