Epson EcoTank ET-2803 Manual

Epson Printer EcoTank ET-2803

Læs gratis den danske manual til Epson EcoTank ET-2803 (2 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Epson EcoTank ET-2803, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

7 Repeat the previous steps for the other colors.

8 Close the ink tank cover.

9 Raise the control panel, then press the power button to

turn on the product. The power light ashes.

Note: If an error code appears, turn o the product and check

that no protective material has been left inside the product.

10 Select your language.

Note: You can change this setting later using the product’s

control panel. For more information, see the online User’s Guide.

11 When an Epson Smart Panel setup message appears on

the LCD screen, select the option to continue setup.

12 When the message to see the Start Here sheet appears

on the LCD screen, press and hold the help button for

5 seconds.

13 Press the start button to start ink charging. Ink charging

takes about 11 minutes.

Note: When the power light stops ashing, ink charging is

complete. Once initial setup of the printer is complete, you can

top o the ink tanks with any remaining ink. See the online User’s

Guide for instructions.

Caution: Do not unplug or turn o the product, or open the

inner cover while the product is charging or you’ll waste ink.

Note: After some ink is used for charging, the rest is available for

printing.

14 Press the OK button to proceed with initial setup.

IMPORTANT: Before using this product, make sure you read

these instructions and the safety instructions in the online User’s

Guide.

Unpack

Note: Do not open the ink bottles until you are ready to ll the ink

tanks. The ink bottles are vacuum packed to maintain reliability.

1 Remove all protective materials from the product.

2 Connect the power cord to the back of the product and to

an electrical outlet.

Caution: Do not connect to your computer yet.

Choose a setup method

The Epson Smart Panel

app can help you set up your printer

through an interactive, step-by-step process using your

smartphone or tablet.

If you do not want to

use a mobile device for

setup, skip to the “Fill ink

tanks” section below.

To use your mobile device

for setup, continue to

step 1.

1 Download the Epson Smart Panel app

from your device’s app store. Do not

launch the app yet.

2 Press the power button to turn on the product.

Note: Do not connect your product to your computer yet.

3 Launch the app and follow its instructions to set up your

product.

For information on connecting your product to a computer,

using voice-activated printing, or solving problems, or for

details on reaching Epson support, see the sections on the

back of this sheet.

Fill ink tanks

Warning: Keep the ink bottles out of the reach of children and do not

drink the ink.

Caution: This product requires careful handling of ink. If ink spills,

wipe it o immediately with a damp towel to avoid permanent stains.

If ink gets on your clothes or belongings, it may not come o.

Note:

• Epson cannot guarantee the quality or reliability of third-party ink.

• Use the ink bottles included with the printer to set up the product.

Part of the ink will be used to charge the print head. These bottles

may print fewer pages compared with replacement ink bottles.

• Epson strongly recommends the use of genuine ink to ensure

optimal print quality and performance.

1 Open the ink tank cover, then open the cap for the black

(BK) ink tank.

Note: Refer to the color-coded sticker above the ink tank unit to

identify the color of each tank.

2 Unpack the black (BK) ink bottle. Hold the ink bottle

upright and slowly turn the bottle cap to remove it.

Caution: Do not shake or squeeze the ink bottle. Do not touch

the top of the ink bottle after its cap is removed.

3 Insert the ink bottle into the lling port.

Note: Do not force the bottles into position; they are keyed for

each color.

4 Wait for the ink to ll the tank.

Do not squeeze the bottle or

allow it to contact any other

surface.

Note: Ink ows into the tank and

stops automatically when the ink

tank is lled to the upper line. If ink

does not ow from the bottle, lift and

reinsert the bottle.

5 When the ink tank is full, remove the ink bottle and

securely close it with the bottle cap. If any ink remains in

the bottle, close the bottle and store it for later use.

Note: Do not leave the ink bottle inserted; otherwise the bottle

may be damaged or ink may leak.

6 Securely close the black ink tank cap.

Start Here

ET-2800/ET-2803

Produkt Specifikationer

Mærke:	Epson
Kategori:	Printer
Model:	EcoTank ET-2803

Har du brug for hjælp?

Hvis du har brug for hjælp til Epson EcoTank ET-2803 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Printer Epson Manualer

Epson Stylus CX5400 Manual

6 Oktober 2025

Epson Artisan 710 Manual

6 Oktober 2025

Epson Stylus CX6600 Manual

6 Oktober 2025

Epson WorkForce 600 Manual

6 Oktober 2025

Epson WorkForce Pro WF-3823 Manual

6 Oktober 2025

Epson Stylus CX6400 Manual

6 Oktober 2025

Epson EcoTank ET-2803 Manual

6 Oktober 2025

Epson Expression Home XP-400 Manual

6 Oktober 2025

Epson EcoTank ET-8700 Manual

6 Oktober 2025

Epson Stylus NX415 Manual

6 Oktober 2025

Printer Manualer

Nyeste Printer Manualer

Equip 351005 Manual

23 November 2025

Xerox AltaLink C8235 Manual

16 November 2025

Xerox AltaLink B8270 Manual

15 November 2025

Utax P-C3563i MFP Manual

15 November 2025

Xerox AltaLink C8245 Manual

15 November 2025

Xerox AltaLink B8245 Manual

14 November 2025

Xerox AltaLink C8255 Manual

14 November 2025

Xerox WorkCentre 255 Manual

14 November 2025

Utax 352ci Manual

14 November 2025

Utax P-C3563DN Manual

14 November 2025