Epson EcoTank ET-2850U Manual

Epson Printer EcoTank ET-2850U

Læs gratis den danske manual til Epson EcoTank ET-2850U (4 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Epson EcoTank ET-2850U, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

8 Close the ink tank cover, then close the scanner unit.

9 Raise the control panel, then press the power button to

turn on the product. The power light ashes.

Note: If an error code appears, turn o the product and check

that no protective material has been left inside the product.

10 Select your language.

Note: You can change this setting later using the product’s

control panel. For more information, see the online User’s Guide.

11 When an Epson Smart Panel message appears on the

LCD screen, select the option to continue setup without

the app.

12 When the message to see the Start Here sheet appears

on the LCD screen, press and hold the help button for

5 seconds.

13 Follow the on-screen instructions to start ink charging. Ink

charging takes about 10 minutes.

Note: When the power light stops ashing, ink charging is

complete. Once initial setup of the printer is complete, you can

top o the ink tanks with any remaining ink. See the online User’s

Guide for instructions.

Caution: Do not unplug or turn o the product, or raise the

scanner unit while the product is charging or you’ll waste ink.

Note: After some ink is used for charging, the rest is available for

printing.

14 Press the OK button to proceed with initial setup.

15 Follow the on-screen instructions to adjust the print

quality of your product.

Note:

• You need to load paper before you can adjust the print quality.

See “Load paper” on this sheet for details.

• Select Adjust Later if you want to adjust the print quality later.

For more information, see the online User’s Guide.

Caution: After setup, periodically inspect the ink levels to ensure they

do not fall below the lowest lines on the tanks. Prolonged use when

ink is below the lowest line could damage the product. See the online

User’s Guide for relling instructions.

IMPORTANT: Before using this product, make sure you read

these instructions and the safety instructions in the online User’s

Guide.

Note: As part of the ReadyPrint™ program, Epson monitors ink usage

remotely to provide you with additional ink before you run out of it. The

product must be connected to the Internet to function and monitor ink

usage.

Unpack

Note: Do not open the ink bottles until you are ready to ll the ink

tanks. The ink bottles are vacuum packed to maintain reliability.

1 Remove all protective materials from the product.

Caution: Do not touch the at white cable or the ink tubes and

their translucent cover.

2 Connect the power cord to the back of the product and to

an electrical outlet.

Caution: Do not connect to your computer yet.

Choose a setup method

The Epson Smart Panel

app can help you set up your printer

through an interactive, step-by-step process using your

smartphone or tablet.

If you do not want to

use a mobile device for

setup, skip to the “Fill ink

tanks” section below.

To use your mobile device

for setup, continue to

step 1.

1 Download the Epson Smart Panel app

from your device’s app store. Do not

launch the app yet.

2 Press the power button to turn on the product.

Note: Do not connect your product to your computer yet.

3 Launch the app and follow its instructions to set up your

product.

For information on connecting your product to a computer, using

voice-activated printing, or solving problems, or for details on

reaching Epson support, see the sections on the back of this

sheet.

Fill ink tanks

Warning: Keep the ink bottles out of the reach of children and do not

drink the ink.

Caution: This product requires careful handling of ink. If ink spills, wipe

it o immediately with a damp towel to avoid permanent stains. If ink gets

on your clothes or belongings, it may not come o.

Note:

• Use only Epson

570 ink provided to you under the ReadyPrint

program.

• Use the ink bottles included with the printer to set up the product. Part

of the ink will be used to charge the print head. These bottles may print

fewer pages compared with replacement ink bottles.

1 With the scanner unit raised, open the ink tank cover, then

open the cap for the black (BK) ink tank.

Note: Refer to the color-coded sticker to identify the color of each

tank.

2 Unpack the black (BK) ink bottle. Hold the ink bottle upright

and slowly turn the bottle cap to remove it.

Caution: Do not shake or squeeze the ink bottle. Do not touch the

top of the ink bottle after its cap is removed.

3 Insert the ink bottle into the lling port.

Note: Do not force the bottle into position; each bottle is keyed for

each color.

4 Wait for the ink to ll the tank.

Do not squeeze the bottle or

allow it to contact any other

surface.

Note: Ink ows into the tank and

stops automatically when the ink

tank is lled to the upper line. If

ink does not ow from the bottle,

lift and reinsert the bottle.

5 When the ink tank is full, remove the ink bottle and securely

close it with the bottle cap. If any ink remains in the bottle,

close the bottle and store it for later use.

Note: Do not leave the ink bottle inserted; otherwise the bottle may

be damaged or ink may leak.

6 Securely close the black ink tank cap.

7 Repeat the previous steps for the other colors.

ET-2850U

Start Here

8 Close the ink tank cover, then close the scanner unit.

9 Raise the control panel, then press the power button to

turn on the product. The power light ashes.

Note: If an error code appears, turn o the product and check

that no protective material has been left inside the product.

10 Select your language.

Note: You can change this setting later using the product’s

control panel. For more information, see the online User’s Guide.

11 When an Epson Smart Panel message appears on the

LCD screen, select the option to continue setup without

the app.

12 When the message to see the Start Here sheet appears

on the LCD screen, press and hold the help button for

5 seconds.

13 Follow the on-screen instructions to start ink charging. Ink

charging takes about 10 minutes.

Note: When the power light stops ashing, ink charging is

complete. Once initial setup of the printer is complete, you can

top o the ink tanks with any remaining ink. See the online User’s

Guide for instructions.

Caution: Do not unplug or turn o the product, or raise the

scanner unit while the product is charging or you’ll waste ink.

Note: After some ink is used for charging, the rest is available for

printing.

14 Press the OK button to proceed with initial setup.

15 Follow the on-screen instructions to adjust the print

quality of your product.

Note:

• You need to load paper before you can adjust the print quality.

See “Load paper” on this sheet for details.

• Select Adjust Later if you want to adjust the print quality later.

For more information, see the online User’s Guide.

Caution: After setup, periodically inspect the ink levels to ensure they

do not fall below the lowest lines on the tanks. Prolonged use when

ink is below the lowest line could damage the product. See the online

User’s Guide for relling instructions.

IMPORTANT: Before using this product, make sure you read

these instructions and the safety instructions in the online User’s

Guide.

Note: As part of the ReadyPrint™ program, Epson monitors ink usage

remotely to provide you with additional ink before you run out of it. The

product must be connected to the Internet to function and monitor ink

usage.

Unpack

Note: Do not open the ink bottles until you are ready to ll the ink

tanks. The ink bottles are vacuum packed to maintain reliability.

1 Remove all protective materials from the product.

Caution: Do not touch the at white cable or the ink tubes and

their translucent cover.

2 Connect the power cord to the back of the product and to

an electrical outlet.

Caution: Do not connect to your computer yet.

Choose a setup method

The Epson Smart Panel

app can help you set up your printer

through an interactive, step-by-step process using your

smartphone or tablet.

If you do not want to

use a mobile device for

setup, skip to the “Fill ink

tanks” section below.

To use your mobile device

for setup, continue to

step 1.

1 Download the Epson Smart Panel app

from your device’s app store. Do not

launch the app yet.

2 Press the power button to turn on the product.

Note: Do not connect your product to your computer yet.

3 Launch the app and follow its instructions to set up your

product.

For information on connecting your product to a computer, using

voice-activated printing, or solving problems, or for details on

reaching Epson support, see the sections on the back of this

sheet.

Fill ink tanks

Warning: Keep the ink bottles out of the reach of children and do not

drink the ink.

Caution: This product requires careful handling of ink. If ink spills, wipe

it o immediately with a damp towel to avoid permanent stains. If ink gets

on your clothes or belongings, it may not come o.

Note:

• Use only Epson

570 ink provided to you under the ReadyPrint

program.

• Use the ink bottles included with the printer to set up the product. Part

of the ink will be used to charge the print head. These bottles may print

fewer pages compared with replacement ink bottles.

1 With the scanner unit raised, open the ink tank cover, then

open the cap for the black (BK) ink tank.

Note: Refer to the color-coded sticker to identify the color of each

tank.

2 Unpack the black (BK) ink bottle. Hold the ink bottle upright

and slowly turn the bottle cap to remove it.

Caution: Do not shake or squeeze the ink bottle. Do not touch the

top of the ink bottle after its cap is removed.

3 Insert the ink bottle into the lling port.

Note: Do not force the bottle into position; each bottle is keyed for

each color.

4 Wait for the ink to ll the tank.

Do not squeeze the bottle or

allow it to contact any other

surface.

Note: Ink ows into the tank and

stops automatically when the ink

tank is lled to the upper line. If

ink does not ow from the bottle,

lift and reinsert the bottle.

5 When the ink tank is full, remove the ink bottle and securely

close it with the bottle cap. If any ink remains in the bottle,

close the bottle and store it for later use.

Note: Do not leave the ink bottle inserted; otherwise the bottle may

be damaged or ink may leak.

6 Securely close the black ink tank cap.

7 Repeat the previous steps for the other colors.

ET-2850U

Start Here

Produkt Specifikationer

Mærke:	Epson
Kategori:	Printer
Model:	EcoTank ET-2850U

Har du brug for hjælp?

Hvis du har brug for hjælp til Epson EcoTank ET-2850U stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Printer Epson Manualer

Epson Stylus NX300 Manual

6 Oktober 2025

Epson WorkForce Pro WP-4520 Manual

6 Oktober 2025

Epson Stylus NX510 Manual

6 Oktober 2025

Epson EcoTank ET-2850U Manual

6 Oktober 2025

Epson EcoTank ET-2980 Manual

6 Oktober 2025

Epson WorkForce 545 Manual

5 Oktober 2025

Epson Expression Photo XP-8800 Manual

5 Oktober 2025

Epson WorkForce Pro WP-4533 Manual

5 Oktober 2025

Epson Artisan 810 Manual

5 Oktober 2025

Epson Stylus NX125 Manual

5 Oktober 2025

Printer Manualer

Nyeste Printer Manualer

HiTi M610 Manual

3 Oktober 2025

Canon imagePROGRAF iPF780 MFP M40 Manual

3 Oktober 2025

HiTi P310W Manual

3 Oktober 2025

Canon imagePROGRAF iPF770 MFP M40 Manual

3 Oktober 2025

HiTi P510k Manual

3 Oktober 2025

Canon imagePROGRAF iPF785 MFP M40 Manual

3 Oktober 2025

HP Color Laserjet Enterprise Flow MFP M681z Manual

1 Oktober 2025

SATO CLN4X Plus Manual

30 September 2025

Canon Pixma TS7450A Manual

30 September 2025

Mount-It! MI-3799 Manual

29 September 2025