Epson ELPCB03 Manual

Epson Beamer ELPCB03

Læs gratis den danske manual til Epson ELPCB03 (3 sider) i kategorien Beamer. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Epson ELPCB03, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Connection & Control Box Operation Guide

■ How To Switch Input Sources

■ Part Names and Functions

Connect devices Change sources Projection starts

Temporarily interrupts video and audio

output from the projector or speakers,

except for the [Mic] port and the [AUX In]

port.

Turns the projector power on or o.

Congures the audio output from the

speakers when they are connected to this

product.

Do not change this switch because the

setting was done optimally at installation.

Temporarily mutes audio signals from the

[Mic] port and the [AUX In] port. While audio

is muted, the indicator of the mute button

turns blue.

Indicates the status of the Connection &

Control Box. (This does not indicate the

status of the projector. )

：Operating normally.

：In standby. Press any button to

resume.

：An error has occurred. Unplug the

Connection & Control Box, and contact

your dealer.

Connects the projector to this device. See

the for more details.Installation Manual

■ Input Ports

• When using a commercially available dynamic microphone, connect to the [Mic] port.

Plug-in power is not supported.

• When inputting audio from a portable audio player and such, connect the audio cable to

[AUX In] port. The audio input from [AUX In] port is always played regardless of the

selected source.

• When connecting a recording device, connect the audio cable to [REC Out] port. The audio

input from the audio input ports, the Aux In, and the Mic port is output. Audio is output in a

constant level and cannot be adjusted.

[Computer1] input port

[Computer2] input port

[A/V Mute] button

[Projector] button

Input source buttons

Input interface cover

Operation indicator

Output ports

[Audio Mute] button

Dip switch

[Volume] dial

Power switch

[HDMI1/MHL] port

[HDMI2] port

[USB-A] port

[Mic] port (φ6.3 mm stereo jack)/

[Audio1] port

[Audio2] port

[AUX In] port

[REC Out] port

[Audio-L/R] port (RCA jack)

[Video] input port (RCA jack)

[USB-B] port

Blue

Orange

Blue

(φ3.5 mm stereo mini jack)

We recommend using a shielded cable.

[Volume] dial (mic input)

(Mini D-Sub 15-pin (female))

Connect cables according to your devices to use.

HDMI

MHL

■

Connection Examples

• When the projector only has one HDMI port, make sure you connect the HDMI

cable to the [HDMI1/MHL] port.

• You may not be able to connect an MHL cable to all devices. Also, depending on

the model or settings of the device, images may not be projected correctly.

• When connecting an MHL cable, make sure the cable meets the MHL standards.

If the cable does not meet the MHL standard, the connected device may

malfunction.

• If you connect using a commercially available MHL-HDMI conversion adapter,

you may not be able to charge the connected device or you may not be able to

perform operations from the projector's remote control.

• If images are not projected correctly using an MHL cable, disconnect and then

reconnect the MHL cable.

• If you switch the HDMI1/MHL source and the HDMI2 source while playing a movie,

the movie may freeze. Stop the movie before switching sources.

Connect the ports in either of the following combinations.

When using [Computer1] input port [Audio1] port

When using [Computer2] input port [Audio2] port

• For projectors which audio can be input with the USB cable in the USB Display

function, there is no need to connect the audio cable.

• Be sure to connect the projector and the computer directly, not via a USB hub.

Connecting with HDMI Cables

If you use a thick HDMI cable, it may disconnect under its own weight. Use the HDMI

cable clamp to secure the cable.

Connecting Using a Computer Cable

Connecting Using a USB Cable

If you output

audio

If you output

audio

Produkt Specifikationer

Mærke:	Epson
Kategori:	Beamer
Model:	ELPCB03

Har du brug for hjælp?

Hvis du har brug for hjælp til Epson ELPCB03 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Beamer Epson Manualer

Epson BrightLink 675Wi+ Manual

12 Januar 2025

4 Januar 2025

3 Januar 2025

3 Januar 2025

3 Januar 2025

3 Januar 2025

3 Januar 2025

3 Januar 2025

23 December 2024

14 December 2024

Beamer Manualer

Nyeste Beamer Manualer

Hisense 100L5ND Manual

2 April 2025

Philips NeoPix 130 Smart Manual

5 Marts 2025

Philips NeoPix 200 NPX200 Manual

5 Marts 2025

Sharp XP-P601Q Manual

20 Februar 2025

InFocus Genesis IN0026ST Manual

20 Februar 2025

20 Februar 2025

30 Januar 2025

30 Januar 2025

30 Januar 2025

Acer Vero PL3515ATV Manual

30 Januar 2025