This guide explains how to install the
See the "Installation Guide" that you
can access using the QR code on the
Do not connect the Control Pad to an unsupported projector
Doing so may damage the device.
The power cable supplied is exclusively for the ELPHD02. Do
not use it with other devices.
Do not disassemble or remodel this product.
WARNING: This product contains chemicals, including lead,
known to the State of California to cause birth defects or
other reproductive harm. Wash hands after handling. (This
notice is provided in accordance with Proposition 65 in Cal.
Health & Safety Code § 25249.5 and following.)
Control pad mass Approx. 0.6 kg
Power (AC adapter) 100 to 240 V AC +/- 10%, 50/60 Hz
Operating temperature 0 to 40°C
Operating altitudes 0 to 3,048 m
Lit blue means the control pad is
communicating with projector.
Lit blue means the power is supplied
Turns the projector on or o.
Switches the projector's input source
to HDBaseT and select the input
source from the device connected to
HDMI1 or HDMI2 of the control pad.
Connect a USB storage device.
Connect a USB cable to the computer
to use the interactive pen as a mouse.
Inputs video signals from HDMI
compatible video equipment and
computers. This port is compatible
À propos de ce Guide d'installation
Ce guide explique comment faire
pour installer le ELPHD02.
Consultez le "Guide d'installation"
que vous pouvez ouvrir en utilisant le
code QR à droite pour plus de détails.
Utiliser le produit de façon sûre
Ne connectez pas le Control Pad à un projecteur non pris en
charge ou à un autre appareil.
Cela peut endommager l'appareil.
Le câble d'alimentation fourni est exclusivement conçu pour
le ELPHD02. Ne l'utilisez pas avec d'autres appareils.
Ne démontez et ne remontez pas ce produit.
Masse du Control Pad Environ 0,6 kg
100 à 240 V CA +/- 10%, 50/60 Hz
Alimentation 12 V CC, 2,5 A, 30 W
Témoins lumineux - Liaison
Allumé en bleu signie que le control
pad est en train de communiquer avec
Témoins lumineux - Alimentation
Allumé en bleu signie que le control
Permet d'allumer ou d'éteindre le
Bascule la source d'entrée sur HDBaseT
et projette depuis l’appareil connecté
au port HDMI1 ou HDMI2 sur le control
Utilisez pour connecter un
périphérique de stockage USB.
Utilisez pour connecter un câble USB
à l'ordinateur an de se servir du stylet
interactif comme d’une souris.
d'équipements vidéo compatibles
HDMI et d'ordinateurs. Ce port est
Über diese Installationsanleitung
Diese Anleitung erläutert die
Installation der ELPHD02.
In der über den QR-Code auf
der rechten Seite aufrufbaren
„Installationsanleitung“ nden Sie
Sichere Verwendung des Produktes
Verbinden Sie das Control Pad nicht mit einem nicht
unterstützten Projektor oder einem anderen Gerät.
Andernfalls könnte das Gerät beschädigt werden.
Das mitgelieferte Netzkabel ist ausschließlich für den
ELPHD02 vorgesehen. Nicht mit anderen Geräten verwenden.
Demontieren oder verändern Sie dieses Produkt nicht.
Gewicht des Control Pad Ca. 0,6 kg
100 bis 240 V Wechselspannung
Stromversorgung 12 V Gleichspannung, 2,5 A, 30 W
Betriebstemperatur 0 bis 40 °C (ohne Kondensation)
Betriebshöhe 0 bis 3.048 m
Blaues Leuchten bedeutet, dass
das Control Pad mit dem Projektor
Blaues Leuchten bedeutet, dass das
Control Pad mit Strom versorgt wird.
Schaltet den Projektor ein oder aus.
Schaltet die Eingangsquelle auf
HDBaseT um und projiziert von dem mit
dem HDMI1- oder HDMI2- Anschluss
am Control Pad verbundenen Gerät.
Zur Verbindung eines USB-
Zur Verbindung eines USB-Kabels mit
dem Computer, damit der interaktive
Stift als Maus genutzt werden kann.
Speist Videosignale von den mit
HDMI kompatiblen Videogeräten und
Computern ein. Dieser Anschluss ist
Acerca de esta Guía de instalación
En esta guía se explica cómo instalar
Consulte la "Guía de instalación", a
la que puede acceder utilizando el
código QR situado a la derecha, para
Utilizar el producto de forma segura
No conecte el Control Pad a un proyector no admitido ni a
Si no sigue esta recomendación, el dispositivo se puede dañar.
El cable de la alimentación suministrado es exclusivamente
para el modelo ELPHD02. No lo utilice con otros dispositivos.
No desmonte o remodele este producto.
Peso del Control Pad Aprox. 0,6 kg
De 100 a 240 VCA +/- 10 %, 50/60 Hz
Alimentación 12 VCC 2,5 A 30 W
Encendido en azul signica que
el Control Pad se comunica con el
Encendido en azul signica que se
suministra alimentación al Control Pad.
Botón de encendido/apagado
Permite encender o apagar el proyector.
Cambia la fuente de entrada a HDBaseT
y proyecta desde el dispositivo
conectado al puerto HDMI1 o HDMI2
Se usa para conectar un dispositivo de
Se usa para conectar un cable USB
al ordenador para usar el lápiz
interactivo como un mouse.
Recibe señales de vídeo de
ordenadores y equipos de vídeo
compatibles con HDMI. Este puerto es
Informazioni sulla presente Guida di installazione
Questa guida spiega come installare
Per maggiori dettagli, consultare la
"Guida di installazione" accessibile
tramite il codice QR sulla destra.
Non collegare il Control Pad a un proiettore o un altro dispositivo
In caso contrario il dispositivo potrebbe danneggiarsi.
Il cavo di alimentazione fornito è da utilizzarsi esclusivamente
con ELPHD02. Non utilizzarlo con altri dispositivi.
Non smontare o modicare il prodotto.
Elemento Speciche tecniche
Massa del Control Pad 0,6 kg circa
da 100 a 240 V CA +/- 10%, 50/60 Hz
Potenza 12 V CC 2,5 A 30 W
Temperatura operativa da 0 a 40° C (senza condensa)
Altitudine operativa da 0 a 3.048 m
Acceso in blu signica che il control pad
è in comunicazione con il proiettore.
Spie luminose - Alimentazione
Acceso in blu signica che il control
Accende e spegne il proiettore.
Commuta la sorgente in ingresso su
HDBaseT e proietta dal dispositivo
connesso alla porta HDMI1 o HDMI2 sul
Utilizzare per collegare un dispositivo
Utilizzare per collegare un cavo USB
al computer per utilizzare la penna
Riceve i segnali video da apparecchiature
video e computer compatibili HDMI. La
porta è compatibile con HDCP2.3.
Sobre o Manual de instalação
Este manual explica como instalar o
Para mais detalhes, consulte o
"Manual de instalação" que pode ser
acedido com o código QR à direita.
Utilizar o Produto em Segurança
Não ligue o Control Pad a um projector não suportado ou a
Caso contrário, poderá danicar o dispositivo.
O cabo de alimentação fornecido destina-se exclusivamente
para o modelo ELPHD02. Não o utilize com outros dispositivos.
Não desmonte nem efectue alterações a este produto.
Peso do control pad Aprox. 0,6 kg
100 a 240 V CA +/- 10%, 50/60 Hz
Potência 12 VDC 2,5 A 30 W
0 a 40°C (sem condensação)
Aceso a azul signica que o Control
Pad está a omunicar com o projector.
Luzes indicadoras - Power
Aceso a azul signica que está a ser
fornecida alimentação ao Control Pad.
Liga ou desliga o projector.
Muda a fonte de entrada para HDBaseT
e projecta a partir do dispositivo
conectado à porta HDMI1 ou HDMI2 do
Para ligação a um dispositivo de
Para ligação de um cabo USB a um
computador para usar a caneta
Permite a entrada de sinais de
vídeo de equipamento de vídeo e
computadores compatíveis com HDMI.
Esta porta é compatível com HDCP2.3.
请勿将 Control Pad 连接到不受支持的投影机或其它设备。
提供的电源线仅适用于 ELPHD02。不要将其用于其他设备。
电源（AC 适配器）100 到 240 V AC +/- 10%，50/60 Hz
过连接到 Control Pad 上的 HDMI1
○：表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
×：表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。
但这只是因为在保证产品性能和功能条件下，现在还没有可替代的材料和技术而被使用。
在中国销售的电子电气产品的环保使用期限，表示按照本产品的安全使用注意事项使用的情况下，从
生产日开始，在标志的年限内使用，本产品含有的有害物质不会对环境、人身和财产造成严重影响。
請勿將 Control Pad 連接至不支援的投影機或其他裝置。
隨附的電源線僅供 ELPHD02 使用。切勿搭配其他裝置使
電源 (AC 變電器 ) 100 至 240 V AC +/- 10%，50/60
從連接至 Control Pad 上 HDMI1 或
製造商 ： SEIKO EPSON CORPORATION
地址 ： 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan
地址 ： 台北市信義區松仁路 100 號 15 樓
http://www.epson.com.tw/TW_RoHS
컨트롤 패드를 지원되지 않는 프로젝터 또는 다른 장치에 연
제공된 전원 케이블은 ELPHD02 전용입니다 . 이 케이블을 다
전원 (AC 어댑터 ) 100 - 240 V AC +/- 10%, 50/60 Hz
작동 온도 0 - 40° C ( 응축 없음 )
コントロールパッドを指定以外のプロジェクターや他の
同梱の電源ケーブルは ELPHD02 専用です。他の機器に
コントロールパッドの分解・改造は絶対にしないでくだ
電源（AC アダプター） 100 - 240 V AC +/- 10%, 50/60 Hz
Supplier's DECLARATION of CONFORMITY
According to 47CFR, Part 2 and 15
Class B Personal Computers and Peripherals; and/or
CPU Boards and Power Supplies used with Class B Personal Computers
Located at: 3840 Kilroy Airport Way
Declare under sole responsibility that the product identied herein, complies with 47CFR Part 2 and 15 of
the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested
and found to be compliant with the standards. Records maintained continue to reect the equipment being
produced can be expected to be within the variation accepted, due to quantity production and testing
on a statistical basis as required by 47CFR 2.906. Operation is subject to the following two conditions : (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may
cause undesired operation.
Type of Product: HDBASET CONTROL BOX
Model: EAI destination: ELPHD02
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause interference to radio and television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by one or more
of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC
Certication or Declaration of this device and may cause interference levels which exceed the limits
established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded
equipment interface cable with this device. If this equipment has more than one interface connector, do
not leave cables connected to unused interfaces. Changes or modications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
©SEIKO EPSON CORPORATION 2019. All rights reserved.
Indication of the manufacturer and the importer in accordance
with requirements of EU directive
Manufacturer: SEIKO EPSON CORPORATION
Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan
Telephone: 81-266-52-3131
Importer: EPSON EUROPE B.V.
Address: Atlas Arena, Asia Building, Hoogoorddreef 5,1101 BA Amsterdam
Telephone: 31-20-314-5000
AEEE Yönetmeliğine Uygundur.
Ürünün Sanayi ve Ticaret Bakanlığınca tespit ve ilan edilen kullanma ömrü 5 yıldır.
Tüketicilerin şikayet ve itirazları konusundaki başvuruları tüketici mahkemelerine ve tüketici hakem
