Epson PowerLite Pro Z8050WNL Manual
Læs nedenfor 📖 manual på dansk for Epson PowerLite Pro Z8050WNL (169 sider) i kategorien Beamer. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 3.5 brugere
Side 1/169
PowerLite® Pro Z8000WUNL/Z8050WNL
User’s Guide
2
Notations Used in This Guide
•Safety indications
The documentation and the projector use graphical symbols to show how to use the projector safely.
Please understand and respect these caution symbols in order to avoid injury to persons or property.
•General information indications
Warning: This indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Caution: This indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect
handling.
sIndicates a page where detailed information regarding a topic can be found.
Procedure Indicates operating methods and the order of operations.
The procedure indicated should be carried out in the order of the numbered steps.
[ (Name) ] Indicates the name of the buttons on the Remote Control or the Control panel.
Example: [ESC] button
"(Menu Name)"
Brightness (Boldface)
Indicates the configuration menu items.
Example:
Select "Brightness" from the Image menu.
Image menu - Brightness
3
Notations Used in This Guide
Introduction
About Your Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Projector Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Ease of use when installed on a ceiling mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Reliability you can depend on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Large Projection Area and Precise Colors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Enhanced security functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Easy to handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using the projector over a network (PowerLite Pro Z8050WNL only) . . . . . 11
Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Front/Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Unpacking the Projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Positioning the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Removing and Attaching the Interface Cover . . . . . . . . . . . . . . . . . . 28
Removing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Attaching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Connecting the Projector to Your Equipment . . . . . . . . . . . . . . . . . . 29
Connecting to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Connecting to the VGA Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Connecting to the BNC Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Connecting to the HDMI Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Connecting to the DVI-D Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Connecting to Video Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Connecting to the HDMI Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Connecting to the DVI-D Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Connecting a Component Video Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Connecting an S-Video Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Connecting a Composite Video Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Turning the Projector On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Adjusting the Image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Adjusting the Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Focusing the Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Zooming the Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Fixing a Tilted Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Useful Functions
Correcting Distortion in the Projected Image. . . . . . . . . . . . . . . . . . . 39
Correcting Distortion with Quick Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Changing the Projected Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Automatically Detect Input Signal and Change the Projected Image (Source
Search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Switch to the target image using the Remote Control . . . . . . . . . . . . . . . . . . . 44
Functions for Enhancing Projection . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Selecting the Projection Quality (Selecting Color Mode) . . . . . . . . . . . . . . . . . 45
Setting the Auto Iris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Hiding the Image Temporarily (Shutter) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Freezing the Image (Freeze) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Contents
4
Changing the Aspect Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Changing methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Changing the Aspect for video equipment images . . . . . . . . . . . . . . . . . . . . 48
Changing the Aspect for computer images . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Pointer Function (Pointer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Enlarging Part of the Image (E-Zoom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Limitation of the Number of the Target Projectors when Using
Multiple Projectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Setting the Projector ID. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Checking the Projector ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Setting the Remote Control ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Correcting Color for Multiple Projectors (Multi-Screen Color
Adjustment) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Summary of Correction Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Correction Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Security Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Managing Users (Password Protect) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Type of Password Protect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Setting Password Protect. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Entering the Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Restricting Button Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Setting Control Panel Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Lens Operation Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Theft Deterrent Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Installing the wire lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Configuration Menu
Using the Configuration Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
List of Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Signal Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Extended Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Network Menu (PowerLite Pro Z8000WUNL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Network Menu (PowerLite Pro Z8050WNL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Notes on operating the network menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Soft keyboard operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Basic Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Wireless LAN Menu (only when the optional Wireless 802.11a/b/g Module
is installed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Security menu (Only available when the optional Wireless 802.11a/b/g/
Module is installed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Wired LAN Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Mail Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Others Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Reset Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Info Menu (Display Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Reset Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Projector Menu and Options List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
5
Troubleshooting
Using the Help Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Problem Solving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Reading the Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
t Indicator is lit or flashing red. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
m o n Indicator is flashing or lit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
When the Indicators Provide No Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Problems relating to images. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Problems when projection starts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Other problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Where to Get Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Internet Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Speak to a Support Representative. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Purchase Supplies and Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
Appendix
Installation Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Cleaning the Projector's Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Cleaning the Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Cleaning the Air filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Replacing Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Replacing the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Replacing the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Lamp replacement period. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
How to replace the lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Resetting the Lamp Hours. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Replacing the Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Air filter replacement period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
How to replace the air filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Optional Accessories and Consumables. . . . . . . . . . . . . . . . . . . . . . . 129
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Notes on Transportation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Moving Nearby. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
When Transporting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Preparing packaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Notes when packing and transporting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Saving a User's Logo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless
LAN Access Point (PowerLite Pro Z8050WNL only) . . . . . . . . . . . . . 133
Connection Setup Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133
Making a Connection Using the Push Button Method . . . . . . . . . . . . . . . . 134
Making a connection using the PIN Code Method. . . . . . . . . . . . . . . . . . . .135
Connecting a LAN Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Connecting to an external monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Removing and Attaching the Projector Lens Unit . . . . . . . . . . . . . . 140
Removing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Attaching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Projector Features 10
Reliability you can depend on
The projector is equipped with two lamps. Even if one of the lamps
breaks, you can continue projecting with the other lamp and avoid
disrupting important presentations.
Large Projection Area and Precise Colors
Easy maintenance
You can replace the lamp by opening a cover and pulling it straight out of
the back of the projector without using a screwdriver.
There is only one air filter so cleaning and replacement are easy. The lamp
and air filter can be safely replaced even when mounted on the ceiling
because their covers do not fall off even if you release them.
Equipped with a high-resolution WUXGA panel (PowerLite Pro
Z8000WUNL only)
You can project a large amount of
information on the screen. Viewers
can see the information at a glance
without having to scroll or switch
screens.
Epson Cinema Filter supports the color gamut for digital cinema.
Select Theater or sRGB in Color Mode to use Epson Cinema Filter for 100%
reproduction of the color gamut used for digital cinema. As a result, this
reproduces colors that are full and deep.
Precise color adjustments
As well as Color Mode, you can also adjust the image's absolute color
temperature and the strength of each RGB color. Also, you can adjust the
hue, saturation, and brightness of R, G, B, C, M, and Y.
Projector Features 11
Enhanced security functions
Easy to handle
Using the projector over a network (PowerLite Pro
Z8050WNL only)
You can use the included software to deliver presentations and meetings
over a network. See your Network Operation Guide for more
information.
Password Protect to restrict and manage users
By setting a Password you can restrict who can use the projector.
Control Panel Lock restricts button operation on the Control
panel.
You can use this to prevent people from changing projector settings
without permission at events, in schools, and so on.
Equipped with various theft deterrent devices
The projector is equipped with the following types of theft deterrent
security devices.
•Security slot
•Security cable installation point
Direct power On/Off
In places where power is managed centrally, such as in a conference room,
the projector can be set to power on and off automatically when the power
source to which the projector is connected is switched on or off. sp.74
No cool down delay
After turning the projector's power off, you can disconnect the projector's
power cable without having to wait for the projector to cool down.
Connect to the projector from computers via a network
You can use your existing network to share the projector from multiple
computers. Documents can be projected from each computer without
having to change any cables during meetings or presentations. Also, you
don't have to worry about the distance between the computer and the
projector.
Connecting wirelessly to a computer
When you install the optional Wireless 802.11a/b/g Module in the projector,
you can connect wirelessly to a computer.
Part Names and Functions 12
Part Names and Functions
Front/Top
The illustration shows the projector with a standard zoom lens (not
included) installed.
Name Function
1Handle Use these handles when carrying the projector.
Also, you can pass an theft deterrent wire lock
through the handles to secure the projector.
Warning:
Do not carry the projector by yourself.
Two people are needed to unpack or carry the
projector.
2Security slot( ) The Security slot is compatible with the Microsaver
Security System manufactured by Kensington®.
3Air intake vent
(Air filter)
Takes in air to cool the projector internally. If dust
collects here it can cause the internal temperature
to rise, and this can lead to problems with
operation and shorten the optical engine's service
life. Be sure to clean the Air filter regularly.
4Front adjustable
foot
When set up on a desk, turn to extend and retract
to adjust the horizontal tilt.
The front adjustable feet can be removed when
the projector is mounted on the ceiling.
5Front cover Remove this cover to remove or install the lens
unit when replacing the lens.
This cover must be installed when using the
projector.
6Remote Receiver Receives signals from the remote control.
7Interface cover Remove this cover to connect cables to the ports
inside when connecting the projector to video
equipment.
8Projection lens Images are projected through here.
9Interface cover
open/close switch
Opens and closes the interface cover.
Part Names and Functions 13
10 Ceiling mount
attachment points
(Four points)
Attach the optional Ceiling mount here when
suspending the projector from a ceiling.
Name Function
Part Names and Functions 14
Interface
The following ports can be accessed by removing the interface cover. For
information on how to remove the interface cover, see sp.28. For
information on how to connect your equipment to the projector, see
sp.29.
Name Function
1HDMI input port For video signals from HDMI compatible video
equipment and computers. This projector is
compatible with HDCP signals.
2BNC input port For analog RGB signals from a computer and
component video signals from other video
sources.
3Video input port For composite video signals from video sources.
4S-Video input port For S-video signals from video sources.
5Cable holder When a thick heavy HDMI cable is connected to
the HDMI input port, run a commercially available
cable tie through this holder to prevent the cable
from disconnecting.
6Computer input port For analog RGB signals from a computer and
component video signals from other video
sources.
7Power inlet Connects to the power cable.
8Remote port Connects the optional remote control cable set
and inputs signals from the remote control. When
the remote control cable is plugged into this port,
the remote receiver on the projector is disabled.
9RS-232C port When controlling the projector from a computer
or controller, connect it with an RS-232C cable.
This port is for control use and should not
normally be used.
10 Wireless LAN Unit
port (PowerLite Pro
Z8050WNL only)
Connects to the optional Wireless 802.11a/b/g
Module.
11 Monitor Out port Outputs to an external monitor the analog signal
from the computer connected to the Computer
input port or the BNC input port. This is not
available for component video signals or other
signals being input to any port other than the
Computer input port or the BNC input port.
12 LAN port (PowerLite
Pro Z8000WUNL
only)
Connects to a LAN cable and then to a network.
13 DVI-D input port For digital RGB signals from a computer’s DVI-D
output port. This projector is compatible with
HDCP signals.
Name Function
Part Names and Functions 15
Rear
14 LAN port (PowerLite
Pro Z8050WNL only)
Connects to a LAN cable and then to a network.
Name Function
1Air exhaust vent
(Lamp cover)
Exhaust vent for air used to cool the projector
internally. Also, open this cover to replace the
projector's lamps.
Warning:
Do not place objects that may become warped or
otherwise affected by heat near the Air exhaust vent
and do not put your face or hands near the vent while
projection is in progress.
Name Function
2Rear foot When set up on a desk, turn to extend and retract
to adjust the horizontal tilt.
The rear adjustable feet can be removed when the
projector is installed on a ceiling.
3Lamp cover open
tab
Use these tabs to open the lamp cover.
4Remote Receiver Receives signals from the remote control.
5Status indicators The color of the indicators and whether they are
flashing or lit indicate the status of the projector.
The illustration shows the PowerLite Pro
Z8050WNL. The PowerLite Pro Z8000WUNL does
not have a wireless indicator.
6[</ ][>/ ] button Corrects horizontal Keystone distortion. If pressed
while the configuration menu or a Help screen is
displayed, these buttons only have the [ ] and
[ ] functions which select menu items and
setting values.
7[Shutter] button Press this button to open or close the electric
shutter. You can close the electric shutter to
completely block a projection.
8[Esc] button Stops the current function.
If pressed when the configuration menu is
displayed, it moves to the previous menu level.
9[w/ ][v/ ]
button
Corrects vertical Keystone distortion. If pressed
while the configuration menu or a Help screen is
displayed, these buttons only have the [ ] and
[ ] functions which select menu items and
setting values.
Name Function
Part Names and Functions 16
10 [Enter] button If pressed during projection of computer analog
RGB signals, it automatically adjusts the Tracking,
Sync., and Position to project the optimum image.
When the configuration menu or a Help screen is
displayed, it accepts and enters the current
selection and moves to the next level.
11 [Menu] button Displays and closes the configuration menu.
12 [Source Search]
button
Changes to the next input source that is
connected to the projector and is sending an
image.
13 [Lens] button Press this button to cycle through the focus, zoom,
and lens shift settings to adjust the lens.
14 [t] button Turns the projector power On or Off.
Name Function
Part Names and Functions 17
Remote Control Name Function
1[t] button Turns the projector power On or Off.
2[Computer] button Changes to images from the Computer input port.
3[BNC] button Changes to images from the BNC input port.
4[Video] button Changes to images from the Video input port.
5[S-Video] button Changes to images from the S-Video input port.
6[Menu] button Displays and closes the configuration menu.
7[h] button When the configuration menu or Help screen is
displayed, it selects menu items and setting
values.
When using the optional wireless mouse receiver,
use this button to move the pointer in the desired
direction.
8[Enter] button When the configuration menu or a Help screen is
displayed, it accepts and enters the current
selection and moves to the next level.
Acts as a mouse's left button when using the
optional wireless mouse receiver.
9[Page] buttons
[ ][][]
When using the optional wireless mouse receiver,
you can change the PowerPoint file page during
projection by pressing the page up/page down
buttons.
10 [Shutter] button Each time you press this button, the electric
shutter closes or opens.
You can close the electric shutter to completely
block a projection.
11 [Auto] button If pressed during projection of computer analog
RGB signals, it automatically adjusts the Tracking,
Sync., and Position to project the optimum image.
Part Names and Functions 18
12 [Aspect] button The Aspect Ratio changes each time the button is
pressed.
13 [Lens Shift] button Press to adjust the lens shift.
14 [ID] button Press to set the remote control ID.
15 [Help] button Displays and closes the Help screen which shows
you how to deal with problems if they occur.
16 Remote port Connects the optional remote control cable set
and outputs signals from the remote control.
When the remote control cable is plugged into
this remote port, the remote receiver is disabled.
17 [Zoom] button Press to adjust the zoom.
18 [Num] button Use this button to enter passwords, IP address
from the Network, and so on.
19 [Focus] button Press to adjust the focus.
20 Numeric buttons Use this button to enter passwords, remote
control IP settings, IP address from the Network,
and so on.
21 [Color Mode] button Each time the button is pressed, the Color Mode
changes.
22 [Freeze] button Images are paused or unpaused.
23 [E-Zoom] buttons
[ ]z][x
The [z] button enlarges the image without
changing the projection size.
The [x] button reduces the parts of images that
have been enlarged using the [z] button.
24 [Pointer] button Press to activate the on screen pointer.
Name Function
25 [Esc] button Stops the current function. If pressed when the
configuration menu is displayed, it moves to the
previous menu level.
Acts as a mouse's right button when using the
optional wireless mouse receiver.
26 [User] button Press to assign a frequently used item from the six
available configuration menu items. By pressing
the button the assigned menu item
selection/adjustment screen is displayed, allowing
you to make one-touch settings/adjustments.
Test Pattern is assigned as the default setting.
27 [LAN] button Changes to images from EasyMP Network
Projection (PowerLite Pro Z8050WNL only). This
button does not function on the PowerLite Pro
Z8000WUNL.
28 ID switch Use this switch to enable (On)/disable (Off) ID
settings for the remote control.
29 [DVI-D/HDMI]
button
Each time you press this button, the image on the
screen changes between the DVI-D and HDMI
input ports.
30 [Search] button Changes to the next input source that is
connected to the projector and is sending an
image.
31 Indicators A light is emitted when outputting remote control
signals.
32 Remote control
light-emitting area
Outputs remote control signals.
Name Function
Part Names and Functions 19
When you use the remote control, make sure you are within the
operating range of the projector’s front or back remote receiver as shown
in the diagram below.
49 ft
(15 m)
49 ft
(15 m)
49 ft
(15 m)
49 ft
(15 m)
Unpacking the Projector 20
Unpacking the Projector
After unpacking the projector, make sure you have all the parts shown
below:
Save all packaging in case you need to ship the projector. Always use the
original packaging (or the equivalent) when you need to send the
projector to another location. Before you move the projector, see the
moving and transportation instructions. sp.130
Projector and lens cap Remote control and
2 AA batteries
Power cord VGA cable foot covers
PDF manuals and
registration CD-ROM
Projector software
CD-ROM
Password Protected
sticker
Positioning the Projector 21
Positioning the Projector
If the projector isn’t already installed in the room you’re using, you’ll probably want to place it on a table in front of the screen. This lets you stand in the
front of the room, face the audience, and remain close enough to the equipment to be able to control it. Try to leave as much space as possible between the
projector and the screen to get a good-size image.
Use the illustrations and tables below to help you determine placement. Image size increases with distance, but can vary depending on which lens you’re
using and whether you’ve adjusted the image with zoom or any other settings.
PowerLite Pro Z8000WUNL, 16:10 image, Rear projection wide lens (ELPLR04)
AProjection distance
BThe distance from the center of the lens to the base of the screen. This
changes depending on the setting for vertical lens shift.
CCenter of lens
Screen or image size Projection distance (1) Offset from lens center (2)
60 inches 38 inches (97 cm) 15.9 inches (40 cm)
70 inches 45 inches (114 cm) 18.5 inches (47 cm)
80 inches 52 inches (131 cm) 21.2 inches (54 cm)
90 inches 58 inches (148 cm) 23.8 inches (61 cm)
100 inches 65 inches (165 cm) 26.5 inches (67 cm)
110 inches 72 inches (182 cm) 29.1 inches (74 cm)
120 inches 79 inches (200 cm) 31.8 inches (81 cm)
Positioning the Projector 22
PowerLite Pro Z8000WUNL, 16:10 image, Wide zoom lens (ELPLW04)
PowerLite Pro Z8000WUNL, 16:10 image, Standard zoom lens (ELPLS04)
200 inches 133 inches (337 cm) 53 inches (135 cm)
300 inches 200 inches (508 cm) 79.5 inches (202 cm)
500 inches 335 inches (852 cm) 132.5 inches (337 cm)
Screen or image size Projection distance (1) (Wide to Tele) Offset from lens center (2)
60 inches 65 to 90 inches (166 to 229 cm) 38.5 to -6.7 inches (98 to -17 cm)
70 inches 77 to 105 inches (195 to 268 cm) 44.9 to -7.8 inches (114 to -20 cm)
80 inches 88 to 121 inches (224 to 307 cm) 51.4 to -9 inches (130 to -23 cm)
90 inches 99 to 136 inches (253 to 347 cm) 57.8 to -10.1 inches (147 to -26 cm)
100 inches 111 to 152 inches (282 to 386 cm) 64.2 to -11.2 inches (163 to -28 cm)
110 inches 122 to 167 inches (310 to 425 cm) 70.6 to -12.3 inches (179 to -31 cm)
120 inches 134 to 183 inches (339 to 464 cm) 77 to -13.4 inches (196 to -34 cm)
200 inches 225 to 306 inches (570 to 778 cm) 128.4 to -22.4 inches (326 to -57 cm)
300 inches 338 to 461 inches (859 to 1171 cm) 192.6 to -33.6 inches (489 to -85 cm)
500 inches 566 to 770 inches (1437 to 1957 cm) 320.9 to -55.9 inches (815 to -142 cm)
Screen or image size Projection distance (1) (Wide to Tele) Offset from lens center (2)
60 inches 87 to 142 inches (221 to 361 cm) 38.5 to -6.7 inches (98 to -17 cm)
70 inches 102 to 166 inches (259 to 423 cm) 44.9 to -7.8 inches (114 to -20 cm)
80 inches 117 to 191 inches (297 to 484 cm) 51.4 to -9 inches (130 to -23 cm)
90 inches 132 to 215 inches (335 to 546 cm) 57.8 to -10.1 inches (147 to -26 cm)
100 inches 147 to 239 inches (374 to 607 cm) 64.2 to -11.2 inches (163 to -28 cm)
110 inches 162 to 263 inches (412 to 669 cm) 70.6 to -12.3 inches (179 to -31 cm)
Screen or image size Projection distance (1) Offset from lens center (2)
Positioning the Projector 23
PowerLite Pro Z8000WUNL, 16:10 image, Middle throw zoom lens 1 (ELPLM06)
PowerLite Pro Z8000WUNL, 16:10 image, Middle throw zoom lens 2 (ELPLM07)
120 inches 177 to 287 inches (450 to 730 cm) 77 to -13.4 inches (196 to -34 cm)
200 inches 297 to 481 inches (755 to 1222 cm) 128.4 to -22.4 inches (326 to -57 cm)
300 inches 448 to 723 inches (1137 to 1837 cm) 192.6 to -33.6 inches (489 to -85 cm)
500 inches 748 to 1207 inches (1900 to 3067 cm) 320.9 to -55.9 inches (815 to -142 cm)
Screen or image size Projection distance (1) (Wide to Tele) Offset from lens center (2)
60 inches 134 to 206 inches (340 to 524 cm) 38.5 to -6.7 inches (98 to -17 cm)
70 inches 157 to 241 inches (399 to 613 cm) 44.9 to -7.8 inches (114 to -20 cm)
80 inches 180 to 277 inches (458 to 702 cm) 51.4 to -9 inches (130 to -23 cm)
90 inches 204 to 312 inches (517 to 792 cm) 57.8 to -10.1 inches (147 to -26 cm)
100 inches 227 to 347 inches (576 to 881 cm) 64.2 to -11.2 inches (163 to -28 cm)
110 inches 250 to 382 inches (635 to 971 cm) 70.6 to -12.3 inches (179 to -31 cm)
120 inches 273 to 417 inches (694 to 1060 cm) 77 to -13.4 inches (196 to -34 cm)
200 inches 459 to 699 inches (1166 to 1775 cm) 128.4 to -22.4 inches (326 to -57 cm)
300 inches 691 to 1051 inches (1755 to 2669 cm) 192.6 to -33.6 inches (489 to -85 cm)
500 inches 1155 to 1755 inches (2934 to 4457 cm) 320.9 to -55.9 inches (815 to -142 cm)
Screen or image size Projection distance (1) (Wide to Tele) Offset from lens center (2)
60 inches 195 to 300 inches (495 to 761 cm) 38.5 to -6.7 inches (98 to -17 cm)
70 inches 229 to 351 inches (581 to 891 cm) 44.9 to -7.8 inches (114 to -20 cm)
80 inches 263 to 402 inches (668 to 1022 cm) 51.4 to -9 inches (130 to -23 cm)
90 inches 297 to 454 inches (754 to 1153 cm) 57.8 to -10.1 inches (147 to -26 cm)
100 inches 331 to 505 inches (841 to 1284 cm) 64.2 to -11.2 inches (163 to -28 cm)
Screen or image size Projection distance (1) (Wide to Tele) Offset from lens center (2)
Positioning the Projector 24
PowerLite Pro Z8000WUNL, 16:10 image, Long throw zoom lens (ELPLL07)
PowerLite Pro Z8050WNL, 16:10 image, Rear projection wide lens (ELPLR04)
110 inches 365 to 557 inches (927 to 1414 cm) 70.6 to -12.3 inches (179 to -31 cm)
120 inches 399 to 608 inches (1013 to 1545 cm) 77 to -13.4 inches (196 to -34 cm)
200 inches 671 to 1020 inches (1705 to 2590 cm) 128.4 to -22.4 inches (326 to -57 cm)
300 inches 1011 to 1534 inches (2569 to 3897 cm) 192.6 to -33.6 inches (489 to -85 cm)
500 inches 1692 to 2563 inches (4298 to 6511 cm) 320.9 to -55.9 inches (815 to -142 cm)
Screen or image size Projection distance (1) (Wide to Tele) Offset from lens center (2)
60 inches 290 to 410 inches (738 to 1043 cm) 38.5 to -6.7 inches (98 to -17 cm)
70 inches 341 to 481 inches (866 to 1222 cm) 44.9 to -7.8 inches (114 to -20 cm)
80 inches 391 to 551 inches (994 to 1401 cm) 51.4 to -9 inches (130 to -23 cm)
90 inches 442 to 622 inches (1122 to 1580 cm) 57.8 to -10.1 inches (147 to -26 cm)
100 inches 492 to 692 inches (1251 to 1759 cm) 64.2 to -11.2 inches (163 to -28 cm)
110 inches 543 to 763 inches (1379 to 1938 cm) 70.6 to -12.3 inches (179 to -31 cm)
120 inches 593 to 833 inches (1507 to 2117 cm) 77 to -13.4 inches (196 to -34 cm)
200 inches 997 to 1397 inches (2533 to 3549 cm) 128.4 to -22.4 inches (326 to -57 cm)
300 inches 1502 to 2102 inches (3816 to 5339 cm) 192.6 to -33.6 inches (489 to -85 cm)
500 inches 2512 to 3512 inches (6381 to 8920 cm) 320.9 to -55.9 inches (815 to -142 cm)
Screen or image size Projection distance (1) Offset from lens center (2)
60 inches 37 inches (95 cm) 15.9 inches (40 cm)
70 inches 44 inches (112 cm) 18.5 inches (47 cm)
80 inches 51 inches (129 cm) 21.2 inches (54 cm)
90 inches 57 inches (146 cm) 23.8 inches (61 cm)
Screen or image size Projection distance (1) (Wide to Tele) Offset from lens center (2)
Positioning the Projector 25
PowerLite Pro Z8050WNL, 16:10 image, Wide zoom lens (ELPLW04)
PowerLite Pro Z8050WNL, 16:10 image, Standard zoom lens (ELPLS04)
100 inches 64 inches (162 cm) 26.5 inches (67 cm)
110 inches 71 inches (179 cm) 29.1 inches (74 cm)
120 inches 77 inches (196 cm) 31.8 inches (81 cm)
200 inches 130 inches (331 cm) 53 inches (135 cm)
300 inches 197 inches (500 cm) 79.5 inches (202 cm)
500 inches 330 inches (838 cm) 132.5 inches (337 cm)
Screen or image size Projection distance (1) (Wide to Tele) Offset from lens center (2)
60 inches 64 to 89 inches (163 to 225 cm) 38.2 to -6.4 inches (97 to -16 cm)
70 inches 75 to 104 inches (192 to 264 cm) 44.5 to -7.4 inches (113 to -19 cm)
80 inches 87 to 119 inches (220 to 302 cm) 50.9 to -8.5 inches (129 to -22 cm)
90 inches 98 to 134 inches (248 to 341 cm) 57.2 to -9.5 inches (145 to -24 cm)
100 inches 109 to 149 inches (277 to 380 cm) 63.6 to -10.6 inches (162 to -27 cm)
110 inches 120 to 165 inches (305 to 418 cm) 70 to -11.7 inches (178 to -30 cm)
120 inches 131 to 180 inches (334 to 457 cm) 76.3 to -12.7 inches (194 to -32 cm)
200 inches 221 to 302 inches (561 to 766 cm) 127.2 to -21.2 inches (323 to -54 cm)
300 inches 333 to 454 inches (846 to 1153 cm) 190.8 to -31.8 inches (485 to -81 cm)
500 inches 557 to 758 inches (1414 to 1926 cm) 318 to -53 inches (808 to -135 cm)
Screen or image size Projection distance (1) (Wide to Tele) Offset from lens center (2)
60 inches 86 to 140 inches (217 to 355 cm) 38.2 to -6.4 inches (97 to -16 cm)
70 inches 100 to 164 inches (255 to 416 cm) 44.5 to -7.4 inches (113 to -19 cm)
80 inches 115 to 188 inches (292 to 476 cm) 50.9 to -8.5 inches (129 to -22 cm)
Screen or image size Projection distance (1) Offset from lens center (2)
Positioning the Projector 26
PowerLite Pro Z8050WNL, 16:10 image, Middle throw zoom lens 1 (ELPLM06)
PowerLite Pro Z8050WNL, 16:10 image, Middle throw zoom lens 2 (ELPLM07)
90 inches 130 to 211 inches (330 to 537 cm) 57.2 to -9.5 inches (145 to -24 cm)
100 inches 145 to 235 inches (368 to 597 cm) 63.6 to -10.6 inches (162 to -27 cm)
110 inches 160 to 259 inches (405 to 658 cm) 70 to -11.7 inches (178 to -30 cm)
120 inches 174 to 283 inches (443 to 719 cm) 76.3 to -12.7 inches (194 to -32 cm)
200 inches 293 to 474 inches (743 to 1203 cm) 127.2 to -21.2 inches (323 to -54 cm)
300 inches 441 to 712 inches (1119 to 1808 cm) 190.8 to -31.8 inches (485 to -81 cm)
500 inches 736 to 1189 inches (1870 to 3019 cm) 318 to -53 inches (808 to -135 cm)
Screen or image size Projection distance (1) (Wide to Tele) Offset from lens center (2)
60 inches 132 to 203 inches (335 to 515 cm) 38.2 to -6.4 inches (97 to -16 cm)
70 inches 155 to 237 inches (393 to 603 cm) 44.5 to -7.4 inches (113 to -19 cm)
80 inches 177 to 272 inches (451 to 691 cm) 50.9 to -8.5 inches (129 to -22 cm)
90 inches 200 to 307 inches (509 to 779 cm) 57.2 to -9.5 inches (145 to -24 cm)
100 inches 223 to 341 inches (567 to 867 cm) 63.6 to -10.6 inches (162 to -27 cm)
110 inches 246 to 376 inches (625 to 955 cm) 70 to -11.7 inches (178 to -30 cm)
120 inches 269 to 411 inches (683 to 1043 cm) 76.3 to -12.7 inches (194 to -32 cm)
200 inches 452 to 688 inches (1147 to 1747 cm) 127.2 to -21.2 inches (323 to -54 cm)
300 inches 680 to 1034 inches (1727 to 2627 cm) 190.8 to -31.8 inches (485 to -81 cm)
500 inches 1137 to 1727 inches (2887 to 4388 cm) 318 to -53 inches (808 to -135 cm)
Screen or image size Projection distance (1) (Wide to Tele) Offset from lens center (2)
60 inches 192 to 295 inches (487 to 749 cm) 38.2 to -6.4 inches (97 to -16 cm)
70 inches 225 to 345 inches (572 to 877 cm) 44.5 to -7.4 inches (113 to -19 cm)
Screen or image size Projection distance (1) (Wide to Tele) Offset from lens center (2)
Removing and Attaching the Interface Cover 28
Removing and Attaching the Interface Cover
Removing
Attaching
When you’ve finished connecting the projector to your equipment
(sp.29) and plugging the power cord into the projector (sp.34),
attach the interface cover as described below.
1 Loosen the screw.
2 While pulling up the interface cover open switch, pull the
interface cover straight out.
1 Remove the top of the interface cover.
2 Install the cover along the guide.
3 Tighten the screws.
Connecting the Projector to Your Equipment 29
Connecting the Projector to Your Equipment
The illustrations in this section show the PowerLite Pro Z8000WUNL. If
you are using the PowerLite Pro Z8050WNL, the projector and interfaces
are slightly different.
Connecting to a Computer
Connecting to the VGA Port
Procedure
AConnect one end of the VGA computer cable to the
projector’s Computer port, and the other end to your
computer’s monitor port.
BTurn the projector on (sp.34), select the image source
(sp.43), and adjust the image (sp.35).
Make sure the Input Signal setting in the Signal menu is set to Auto or
RGB. sp.69
Connecting to the BNC Ports
Procedure
AAttach the BNC connectors on one end of your cable (not
included) to the projector’s BNC ports. Connect the other
end of the cable to your computer.
BTurn the projector on (sp.34), select the image source
(sp.43), and adjust the image (sp.35).
Make sure the Input Signal setting in the Signal menu is set to Auto or
RGB. sp.69
Connecting the Projector to Your Equipment 30
Connecting to the HDMI Port
Procedure
AConnect one end of your HDMI cable (not included) to the
projector’s HDMI port, and the other end to your computer’s
HDMI port.
BTurn the projector on (sp.34), select the image source
(sp.43), and adjust the image (sp.35).
Connecting to the DVI-D Port
Procedure
AConnect one end of your DVI-D cable (not included) to the
projector’s DVI-D port, and the other end to your computer’s
DVI-D port.
BTurn the projector on (sp.34), select the image source
(sp.43), and adjust the image (sp.35).
Adjusting the Image 35
Adjusting the Image
Adjusting the Position
Procedure
APress the [Lens Shift] button on the remote control or press
the [Lens] button on the back of the projector until "Adjust
Lens Shift" is displayed on the screen.
BTo adjust the position, use the [ ] button on the remote h
control or the arrow buttons on the back of the projector as
shown below.
Press the button repeatedly to make fine adjustments. Press and
hold the button to make larger adjustments.
CWhen you’re done, press the [Esc] button on the remote
control or on the back of the projector.
Adjusting the Image 36
Focusing the Image
Procedure
APress the [Focus] button on the remote control or press the
[Lens] button on the back of the projector until "Adjust
Focus" is displayed on the screen.
BTo adjust the focus, use the [h] button on the remote control
or the arrow buttons on the back of the projector as shown
below.
CWhen you’re done, press the [Esc] button on the remote
control or on the back of the projector.
Zooming the Image
Procedure
APress the [Zoom] button on the remote control or press the
[Lens] button on the back of the projector until "Adjust
Zoom" is displayed on the screen.
BTo zoom, use the [h] button on the remote control or the
arrow buttons on the back of the projector as shown below.
CWhen you’re done, press the [Esc] button on the remote
control or on the back of the projector.
Adjusting the Image 37
Fixing a Tilted Image
If you’ve placed your projector on a table in front of the screen and the
image is tilted as shown below, you can use the four adjustable feet to
correct the tilt.
38
Useful Functions
This chapter explains useful tips for giving presentations, and the Security functions.
Correcting Distortion in the Projected Image 39
Correcting Distortion in the Projected Image
There are two ways to correct distortion in projected images.
•Quick Corner
This allows you to manually correct each of the four corners of the
projected image separately. sp.40
We recommend using Quick Corner to accurately adjust keystone
distortion.
•H/V-Keystone
This allows you to manually correct distortion in the horizontal and
vertical directions independently. You can perform easy H/V-Keystone
corrections by using the [w/ ] [v/ ] [</ ] and [>/ ] buttons
on the projector's control panel, as shown below.
Before performing horizontal or vertical keystone, use the lens shift
function to horizontally center the lens and vertically move the lens to
the top or bottom. Otherwise, the distortion is not corrected accurately.
The projected image may become smaller after you perform
H/V-Keystone.
The correction may not be properly performed for some zoom settings.
Quick Corner and H/V-Keystone cannot be performed at the same time.
When the Keystone correction method is selected from the
configuration menu, the correction method you choose is assigned to the
[w/ ], [v/ ], [< >/ ], and [ / ] buttons on the control panel. The
default setting for Keystone is set to H/V-Keystone, so when [w/ ],
[v/ ], [< >/ ], and [ / ] buttons are pressed, H/V-Keystone
correction is carried out.
Because Quick Corner and H/V-Keystone correction can be carried out
while projecting a test pattern, you do not need to make preparations by
connecting a computer or other equipment.
Correcting Distortion in the Projected Image 40
Correcting Distortion with Quick Corner
Procedure
APress the Menu button, and then from the configuration
menu select Settings - Keystone.
BSelect "Quick Corner", and then press the [Enter] button.
Press the [Enter] button again to display the selection screen from
which you can select one of the four corners.
Using the Remote Control Using the Control panel
Correcting Distortion in the Projected Image 41
CUse the [h] button on the remote control or the [w/ ],
[v/ ], [</ ], and [>/ ] buttons on the control panel to
select the corner you want to adjust, and then press the
[Enter] button.
DTo adjust the shape, use the [h] button on the remote
control or the [w v </ ], [ / ], [ / ], and [>/ ] buttons on
the control panel. When you finish adjusting the corner,
press [Esc] or [Enter].
If the triangle in the direction you are adjusting the shape turns
gray, as shown in the screen shot below, you cannot adjust the
shape any further in that direction.
Correcting Distortion in the Projected Image 42
ERepeat steps 3 and 4 as needed to adjust any remaining
corners.
FWhen you are done, press the [Esc] button to exit the
correction menu.
Because the correction method was changed to Quick Corner from
Keystone in the configuration menu, when [w/ ], [v/ ],
[</ ], and [>/ ] buttons are pressed later, the screen for select-
ing the corner in procedure 2 is displayed. Change Keystone from
the configuration menu to H/V-Keystone if you want to correct
H/V-Keystone when pressing the [w/ ], [v/ ], [</ ], and
[>/ ] buttons on the control panel.
If the Esc button is held down for about two seconds while correcting
with Quick Corner, the following screen is displayed.
Reset Quick Corner: Resets the result of Quick Corner corrections.
Switch to H/V-Keystone: Switches the correction method to
H/V-Keystone.
Changing the Projected Image 43
Changing the Projected Image
You can change the projected image in the following two ways.
• Changing by Source Search
The projector automatically detects signals being input from connected
equipment, and the image being input from the equipment is projected.
• Changing directly to the target image
You can use the remote control buttons to change to the target input
port.
Automatically Detect Input Signal and Change the
Projected Image (Source Search)
You can project the target image quickly as input ports with no image
signal being input are ignored when you change by pressing the Source
Search button.
Skipped when no image signal is being input.
1 Computer
2 BNC
3 DVI-D
4 S-Video
5 Video
6 HDMI
7 LAN (PowerLite Pro Z8050WNL only): When using EasyMP
Network Projection, the image from a computer connected to the
projector via a network
Functions for Enhancing Projection 45
Functions for Enhancing Projection
Selecting the Projection Quality (Selecting Color
Mode)
You can easily obtain the optimum image quality simply by selecting the
setting that best corresponds to your surroundings when projecting. The
brightness of the image varies depending on the mode selected.
* The Epson Cinema Filter deploys automatically when Theatre or sRGB is
selected.
Procedure
The Color Mode name is displayed on the screen by pressing the button.
If you press the button while the Color Mode name is displayed on the
screen, it changes to the next Color Mode.
The color mode can also be set using Color Mode in the Image menu
from the configuration menu.
Mode Application
Dynamic Ideal for use in a bright room. This is the
brightest mode.
Presentation Ideal for making presentations using color
materials in a bright room.
Theatre *Ideal for watching films in a dark room. Gives
images a natural tone almost like an original
source.
Photo (When computer images (analog RGB/digital
RGB) are input)
Ideal for projecting still pictures, such as photos,
in a bright room. The images are vivid and
brought into contrast.
Sports (When Component Video, S-Video, or composite
video images are input)
Ideal for watching TV programmes in a bright
room. The images are vivid and brought to life.
sRGB*Ideal for images that conform to the sRGB color
standard.
Customized Select Customized to adjust R,G,B,C,M,Y from
Color Adjustment in the configuration menu.
Remote Control
Functions for Enhancing Projection 46
Setting the Auto Iris
By automatically setting the luminance according to the brightness of the
displayed image, it lets you enjoy deep and rich images.
Procedure
APress the [Menu] button, and select Image - Auto Iris from
the configuration menu.
BSelect On.
The setting is stored for each Color Mode.
CPress the [Menu] button to close the configuration menu.
Auto Iris can be set only when the Color Mode is Dynamic, The-
atre, or Customized.
When Multi-screen is set to On, Auto Iris does not work.
Hiding the Image Temporarily (Shutter)
You can use this when you want to focus the audience's attention on what
you are saying, or if you do not want to show details such as when you are
changing between files during presentations from a computer.
Procedure
Each time you press the buttons, the electric shutter closes or opens.
When the shutter is closed and no operations are performed for about
120 minutes, the projector enters Sleep Mode and turns off
automatically. If you do not want Sleep Mode to activate, change the
Shutter Timer setting to Off from Operation in the Extended menu.
If you press [t] button while the shutter is closed, the shutter
automatically opens and a message requesting confirmation to turn off
the power is displayed on the screen.
Using the Remote Control Using the Control panel
Using the Remote Control Using the Control panel
Functions for Enhancing Projection 48
Changing the Aspect for video equipment images
Each time the button is pressed, the aspect changes in the order Normal,
16:9, Full, Zoom, and Native.
1 Normal
2 16:9
3 Full
4 Zoom
5 Native
Produkt Specifikationer
| Mærke: | Epson |
| Kategori: | Beamer |
| Model: | PowerLite Pro Z8050WNL |
Har du brug for hjælp?
Hvis du har brug for hjælp til Epson PowerLite Pro Z8050WNL stil et spørgsmål nedenfor, og andre brugere vil svare dig
Beamer Epson Manualer
12 Januar 2025
4 Januar 2025
3 Januar 2025
3 Januar 2025
3 Januar 2025
3 Januar 2025
3 Januar 2025
3 Januar 2025
23 December 2024
14 December 2024
Beamer Manualer
- Beamer Auna
- Beamer D-Link
- Beamer Asus
- Beamer Fun Generation
- Beamer Prixton
- Beamer Panasonic
- Beamer RCA
- Beamer Dahua Technology
- Beamer HP
- Beamer Atlantis Land
- Beamer Vankyo
- Beamer Hitachi
- Beamer Lenovo
- Beamer OKI
- Beamer Adj
Nyeste Beamer Manualer
5 Marts 2025
5 Marts 2025
30 Januar 2025
30 Januar 2025
30 Januar 2025
30 Januar 2025
30 Januar 2025
30 Januar 2025
29 Januar 2025
13 Januar 2025