Epson PowerLite W70 Manual

Epson videoprojektorer PowerLite W70

Læs gratis den danske manual til Epson PowerLite W70 (4 sider) i kategorien videoprojektorer. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Epson PowerLite W70, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Quick Setup

IMPORTANT: Before using this product, make sure you read these instructions

and the safety instructions in the online User’s Guide.

Contents

Make sure your projector box includes all of these parts:

You can place the projector on almost any flat surface. See the online User’s

Guide for more information.

Connect the projector

External video source

You can connect an external video source with an HDMI cable (not included).

Caution: Do not turn on the video source before connecting it to the projector;

you may damage the projector.

Note: Some external video sources may require an optional HDMI adapter

cable.

1 Remove the rear cover of the projector.

2 Connect an HDMI cable to your video source’s HDMI output port.

3 Connect the other end of the HDMI cable to the projector’s HDMI

extension cable.

4 Pass the HDMI cable through the cable path as shown.

5 Replace the rear cover of the projector.

Streaming device

You can connect a streaming device inside the projector, such as an

Amazon Fire™ TV Stick or Roku® Streaming Stick®.

Note: The projector’s HDMI port does not support MHL.

1 Remove the rear cover of the projector.

2 Open the USB power cable clamp.

3 Connect your streaming device to the projector’s HDMI extension cable.

4 Connect the USB power cable to your streaming device and make sure the

device fits securely inside the projector.

Device’s power port on the side

Device’s power port on the bottom

Caution: Do not force a device into the projector; you may damage the

projector or the device.

PowerLite® W70/W75

5 Pass the USB power cable through the hook and clamp, depending on

the location of the power port on your streaming device as shown below,

then close the clamp to secure the cable.

Device’s power port on the side

Device’s power port on the bottom

6 Replace the rear cover of the projector.

Turn on the projector

1 Plug in the projector.

2 Press the power button on the projector or the projector remote

control. The power light flashes blue, then stays on.

3 The default language of the menu system is English. To select another

language, press the menu button on the projector remote control.

Select Settings and press Enter. Select Language and press Enter. Select

your language and press . Press the menu button to exit.Enter

Note: To shut down the projector, press the power button on the projector

or the remote control, then press the button again to confirm, if necessary.

Adjust the image

1 Move the focus lever on top of the projector left or right to adjust the

image sharpness.

2 To adjust the image height, press and hold the foot release lever on the

bottom of the projector to extend the front adjustable foot. Release the

lever to lock the foot in the desired position.

Using the remote control

Install the batteries as shown (two AAA batteries).

Access projector menus

Turn projector on or off

Enter a selection

Turn off audio and

video temporarily

Navigate menus

Change color mode

Turn volume up or down

Adjust image shape

(keystone)

Go back to previous

function

Control playback of

connected device

See the online User’s Guide for more information on using the remote control.

Troubleshooting

• If you see a message after turning on the projector, make sure No signal

your streaming device or HDMI cable is properly connected.

• If you see a blank screen, check the following:

• Make sure the power light on the projector is blue and not

flashing.

• Press the power button to wake the projector from standby or

sleep mode, if necessary.

Produkt Specifikationer

Mærke:	Epson
Kategori:	videoprojektorer
Model:	PowerLite W70
Vekselstrømsindgangsspænding:	100–240 V
Vekselstrømsindgangsfrekvens:	50/60 Hz
Bredde:	210.82 mm
Dybde:	231 mm
Højde:	91 mm
Vægt:	2722 g
Produktfarve:	Hvid
Produkttype:	Standard kasteprojektor
Bluetooth:	Ja
Naturligt aspektforhold:	16:10
HDCP:	Ja
Strømforbrug (standby):	- W
Strømforbrug (typisk):	178 W
Driftstemperatur (T-T):	41 - 95 °C
Markedspositionering:	Bærbar
Kabler inkluderet:	Vekselstrøm
Batterier inkluderet:	Ja
Støjniveau:	29 dB
Fjernbetjening inkluderet:	Ja
Strømkilde:	Vekselstrøm
Placering:	Loft
Bæredygtighedscertifikater:	RoHS
Slot til kabellås:	Ja
Emballageindhold:	PowerLite W70 projector, power cable, remote control, 2 AAA batteries, Documentation
Fokus:	Vejledning
Antal farver:	16,78 millioner farver
Kontrastforhold (typisk):	2500000:1
Kabellåseslids type:	Kensington
Fast brændvidde:	13.53 mm
Brændviddeområde:	- mm
Projektor lysstyrke:	2000 ANSI lumens
Projektionsteknologi:	3LCD
Projektor indbygget opløsning:	WXGA (1280x800)
Skærmstørrelse kompatibilitet:	22 - 150 "
Projiceringsafstand:	- m
Trapezkorrektion, vertikal:	± 45 °
Throw-forhold:	1.04 - 1.40
Levetid for lyskilde:	12000 t
Lyskilde type:	Laser
Trapezkorrektion, horisontal:	± 40 °
Matrix-type:	3-panel (p-Si TFT aktiv)
Zoomforhold:	1.35:1
Strømforbrug (økonomi tilstand):	118 W
Farvetilstande for video:	Bright cinema,Cinema,Dynamic,Natural
Projiceringstilstande:	Front,Rear
Farve lysudbytte:	2000 ANSI lumens
Hvidt lysudbytte:	2000 ANSI lumens