Epson Pro Cinema EH-QB1000W Manual

Epson videoprojektorer Pro Cinema EH-QB1000W

Læs gratis den danske manual til Epson Pro Cinema EH-QB1000W (4 sider) i kategorien videoprojektorer. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om Epson Pro Cinema EH-QB1000W, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Quick Setup

IMPORTANT: Before using this product, make sure you read these instructions

and the safety instructions in the online User’s Guide.

Note: Your product may differ from the illustrations on this sheet, but the

instructions are the same.

Choose a location

Keep the projector level and place it at a height so its lens is even with the top

or bottom of the screen and is centered horizontally. If this isn’t possible, use the

lens shift feature to reposition the image (see “Adjust the image”).

See the online User’s Guide for more information on where to place your

projector.

Connect the projector

Connect multiple video devices and use the buttons on the remote Source

control or the button on the projector to switch between them. For Source

additional connection types, see the online User’s Guide.

HDMITM cable

Power supply

USB cable

Streaming

device

Note:

• When projecting images at 4K 120Hz, use an HDMI 2.1 rated cable (ultra-high

speed).

• You can output audio to an external sound system that supports

using the HDMI™ 2 (eARC/ARC) port.

• If you are connecting an optical HDMI cable that has a power supply USB cable,

you must also connect the cable’s USB power connector to the Opt.HDMI

™

(300mA) port.

Wired network

Connect the projector to your network using an Ethernet cable. See “Wired

network configuration” for more information.

Ethernet cable

Turn on your equipment

1 Plug in the projector.

2 Press the power button on the projector or the button on the On

remote control. The shutter opens and the power light flashes blue,

then stays on.

Note: To shut down the projector, press the power button on the

projector or the button on the remote control, then press the Standby

button again to confirm, if necessary. Wait for cooldown to complete

before unplugging the projector.

3 Use the arrow and Enter buttons on the remote control to select the focus,

image orientation, and language settings.

Note: To change these settings, see the online User’s Guide.

4 Turn on your video source.

5 If you don’t see an image, press one of the Source buttons on the remote

control to select the image source.

Note: If you still see a blank screen or have other display problems, see the

troubleshooting tips on this sheet.

Using the remote control

Install the batteries as shown (two AA batteries).

Choose which source to

display

Turn projector on

Access projector menus

Adjust zoom, focus,

and lens shift

Turn off projector

display

Navigate projector

menus

Turn projector off

Control connected

sources with HDMI

Link

For more information on using the remote control, see the online User’s Guide.

EH-QB1000B/EH-QB1000W

Adjust the image

1 Press the button on the remote control to display a test pattern.Pattern

2 Press the Lens button on the remote control and use the and buttons

to focus the image.

3 Press the Lens button on the remote control again and use the and

buttons to reduce or enlarge the image.

4 Press the Lens button on the remote control again and use the , ,

, and buttons to reposition the image.

Wired network

configuration

Follow these steps to set up your projector for a wired network connection.

Press the button on the remote control, select the menu, Menu Network

then press Enter.

2 Choose Network Settings and press Enter.

3 Select the Wired LAN menu and press Enter.

4 Choose IP Settings and press Enter.

5 If your network assigns addresses automatically, make sure the DHCP

setting is on. If not, make sure DHCP is off and enter the projector’s

IP Address Subnet Mask Gateway Address, , and , as needed. Then

press .Esc

6 To prevent the IP address from appearing on the network standby screen,

set the setting to IP Address Display Off.

7 When you are finished, return to the Network Settings menu and select Set

to apply your settings. Then select to save the settings.Yes

Note: If you are prompted to enter a password for Epson Web Control, you

can create a password or leave it blank. If you do not set a password, you

cannot use Epson Web Control.

8 Press the Menu button to exit the menu system.

Using web control

You can use a standard web browser to control the projector through the

network. A virtual remote control on your computer or mobile device screen lets

you perform many of the same functions as you can with the physical remote

control.

1 Open your web browser and enter the IP address of the projector you want

to monitor in the browser’s address bar. The Epson Web Control menu

opens.

If you’re not sure what the IP address of the projector is, turn the projector

on and select from the Network menu to display the IP Wired LAN Info

address of the projector. (Do not enter the leading zeroes.)

2 Select Basic Control or . If you see a login screen, enter Remote

EPSONWEB as the user name. If a password was created, enter the

password.

3 Use the on-screen buttons to operate the projector, as you would using the

remote control. See the online User’s Guide for details.

Turn off picture

and sound

Select input source

Troubleshooting

• If you see a blank screen, check the following:

• Make sure your computer or video device is properly connected.

• Make sure the power and Status lights on the projector are blue and

not flashing.

• Press the power button on the projector or the remote control to

wake the projector from standby or sleep mode, if necessary.

• If you see a blank screen when a computer is connected, check the

following:

• On Windows®, hold down the Windows key and press at the same P

time, then click Duplicate.

• If you are using a Mac laptop with macOS 13 or newer, select System

Settings Displays > . Select the projector, then choose the mirror

option for your display from the Use as pop-up menu.

On macOS 12, select System Preferences > Displays Display >

Settings. Select the projector, then choose the mirror option for your

display from the drop-down menu.

On macOS 11 and older, open System Preferences and select

Displays Arrangement. Click the tab and select the Mirror Displays

checkbox.

• If the projector does not respond to remote control commands, make sure

the batteries in the remote control are installed correctly. Replace the

batteries, if necessary.

Produkt Specifikationer

Mærke:	Epson
Kategori:	videoprojektorer
Model:	Pro Cinema EH-QB1000W

Har du brug for hjælp?

Hvis du har brug for hjælp til Epson Pro Cinema EH-QB1000W stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

videoprojektorer Epson Manualer

Epson EB-L690U Manual

12 August 2025

Epson EB-E24 Manual

12 August 2025

Epson EB-L795SE Manual

12 August 2025

Epson EB-FH54 Manual

12 August 2025

Epson EB-L790U Manual

12 August 2025

Epson EMP-DM1 Manual

5 August 2025

Epson ELPMB48 Manual

4 August 2025

Epson Dreamio EMP-TW10H Manual

4 August 2025

Epson EB-Z8350W Manual

4 August 2025

Epson ELPIF03 Manual

4 August 2025

videoprojektorer Manualer

Nyeste videoprojektorer Manualer

Hisense PX2-PRO Manual

14 August 2025

Hisense 100L9G Manual

14 August 2025

Hisense 120L9H Manual

14 August 2025

Hisense 100L9HD Manual

14 August 2025

Hisense 120L5HA Manual

14 August 2025

Hisense 120L9HA Manual

14 August 2025

Hisense 100L5HD Manual

14 August 2025

Optoma AZW360ST Manual

12 August 2025

Optoma AZH360ST Manual

12 August 2025

Samsung SP-M200W Manual

10 August 2025