Epson WorkForce Pro WF-4833 Manual

Epson Printer WorkForce Pro WF-4833

Læs gratis den danske manual til Epson WorkForce Pro WF-4833 (4 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Epson WorkForce Pro WF-4833, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Start Here

Load paper

See the online User’s Guide for information about loading

capacity, available paper types and sizes, loading envelopes,

and using the ADF.

1 Make sure the product is done charging the ink, and then

lower the control panel, lift the output tray, and pull out the

paper cassette.

2 Slide the side edge guides all the way out and set the

front edge guide to the paper size you are using.

3 Insert paper with the glossy or printable side down.

Note: Make sure the paper is loaded against the front edge

guide and not sticking out from the end of the cassette.

4 Slide the edge guides against the paper, but not too

tightly.

5 Keep the cassette ﬂat as you insert it all the way, then

lower the output tray.

IMPORTANT: Before using this product, make sure you read

these instructions and the safety instructions in the online User’s

Guide.

Note: This printer is designed for use with Epson

cartridges only, not

third-party cartridges or ink. For important ink information, visit

www.epson.com/epsonink (U.S.) or www.epson.ca/epsonink (Canada)

or see your printer box.

Important Safety Instructions: When using telephone equipment, you

should always follow basic safety precautions to reduce the risk of fire,

electric shock, and personal injury, including the following:

• Do not use the Epson product near water.

• Always keep this guide handy.

• Avoid using a telephone during an electrical storm. There may be a

remote risk of electric shock from lightning.

• Do not use a telephone to report a gas leak in the vicinity of the leak.

Caution: To reduce the risk of fire, use only a No. 26 AWG or larger

telecommunication line cord.

The illustrations show the WF-4830, but the steps are the same

for all models, unless otherwise speciﬁed.

Unpack

Note: Do not open the ink cartridge packages until you are ready to

install the ink. Cartridges are vacuum packed to maintain reliability.

1 Remove all

protective materials

from the product.

2 Lift up the scanner unit until it locks into place and remove

all protective materials from inside the product.

Caution: Do not touch the ﬂat white cable.

2 Gently shake the ink cartridges, and remove them from the

packaging.

3 Remove only the yellow tape from each ink cartridge.

Caution: Do not touch the areas shown above. Doing so may

prevent normal operation and printing.

4 Insert the cartridge in the holder for each color. Press each

cartridge down until it clicks. Make sure all cartridges are

pushed down into place.

5 Lower the scanner unit.

6 WF-3820: Follow the on-screen instructions to start

charging the ink.

WF-4820/WF-4830: Ink charging begins automatically.

Ink charging takes approximately 5 minutes. When you

see a completion message on the product’s LCD screen,

charging is complete.

Caution: Don’t turn off the printer or raise the scanner unit while

the printer is charging or you’ll waste ink.

Note: As part of setup, your product’s serial number will be sent

to a secure Epson server so that you can be eligible to participate

in programs we may offer from time to time, including the Epson

ink replenishment program. You will have a separate opportunity

to consent to participating in such programs.

7 Follow the on-screen instructions to select paper settings.

3 Lower the scanner unit.

Turn on and configure

1 Connect the power cord to the back of the product and to

an electrical outlet.

Caution: Do not connect to your computer yet.

Note: If an error code appears, turn off the product and

check that no protective material has been left inside the

product.

2 Raise the control panel and turn on the product.

3 Select your language, country, date, and time on the

LCD screen.

Note: You can change these settings later using the product’s

control panel. For more information, see the online User’s Guide.

Install ink cartridges

Caution: Keep the ink cartridges out the reach of children and do not

drink the ink.

Note: The included initial cartridges are designed for reliable printer

setup and cannot be used as replacement cartridges or resold. After

setup, the remaining ink is available for printing.

1 Lift up the scanner

unit until it locks into

place.

WF-3820/WF-4820/WF-4830 Series

Produkt Specifikationer

Mærke:	Epson
Kategori:	Printer
Model:	WorkForce Pro WF-4833

Har du brug for hjælp?

Hvis du har brug for hjælp til Epson WorkForce Pro WF-4833 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Printer Epson Manualer

Epson Stylus CX5400 Manual

6 Oktober 2025

Epson Artisan 710 Manual

6 Oktober 2025

Epson Stylus CX6600 Manual

6 Oktober 2025

Epson WorkForce 600 Manual

6 Oktober 2025

Epson WorkForce Pro WF-3823 Manual

6 Oktober 2025

Epson Stylus CX6400 Manual

6 Oktober 2025

Epson EcoTank ET-2803 Manual

6 Oktober 2025

Epson Expression Home XP-400 Manual

6 Oktober 2025

Epson EcoTank ET-8700 Manual

6 Oktober 2025

Epson Stylus NX415 Manual

6 Oktober 2025

Printer Manualer

Nyeste Printer Manualer

Brother HL-L8430CDW Manual

15 Oktober 2025

Brother MFC-J1360DW Manual

15 Oktober 2025

Brother MFC-L8930CDW Manual

15 Oktober 2025

Brother MFC-L8970CDW Manual

14 Oktober 2025

Samsung ML-2168 Manual

11 Oktober 2025

HP Smart Tank 5106 Manual

6 Oktober 2025

HiTi M610 Manual

3 Oktober 2025

Canon imagePROGRAF iPF780 MFP M40 Manual

3 Oktober 2025

HiTi P310W Manual

3 Oktober 2025

Canon imagePROGRAF iPF770 MFP M40 Manual

3 Oktober 2025