Epson WorkForce Pro WF-4834 Manual

Epson Printer WorkForce Pro WF-4834

Læs gratis den danske manual til Epson WorkForce Pro WF-4834 (4 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om Epson WorkForce Pro WF-4834, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Start Here

Load paper

See the online User’s Guide for information about loading

capacity, available paper types and sizes, loading envelopes,

and using the ADF.

1 Make sure the product is done charging the ink, and then

lower the control panel, lift the output tray, and pull out the

paper cassette.

2 Slide the side edge guides all the way out and set the

front edge guide to the paper size you are using.

3 Insert paper with the glossy or printable side down.

Note: Make sure the paper is loaded against the front edge

guide and not sticking out from the end of the cassette.

4 Slide the edge guides against the paper, but not too

tightly.

5 Keep the cassette ﬂat as you insert it all the way, then

lower the output tray.

IMPORTANT: Before using this product, make sure you read

these instructions and the safety instructions in the online User’s

Guide.

Note: This printer is designed for use with Epson

cartridges only, not

third-party cartridges or ink. For important ink information, visit

www.epson.com/epsonink (U.S.) or www.epson.ca/epsonink (Canada)

or see your printer box.

Important Safety Instructions: When using telephone equipment, you

should always follow basic safety precautions to reduce the risk of fire,

electric shock, and personal injury, including the following:

• Do not use the Epson product near water.

• Always keep this guide handy.

• Avoid using a telephone during an electrical storm. There may be a

remote risk of electric shock from lightning.

• Do not use a telephone to report a gas leak in the vicinity of the leak.

Caution: To reduce the risk of fire, use only a No. 26 AWG or larger

telecommunication line cord.

The illustrations show the WF-4830, but the steps are the same

for all models, unless otherwise speciﬁed.

Unpack

Note: Do not open the ink cartridge packages until you are ready to

install the ink. Cartridges are vacuum packed to maintain reliability.

1 Remove all

protective materials

from the product.

2 Lift up the scanner unit until it locks into place and remove

all protective materials from inside the product.

Caution: Do not touch the ﬂat white cable.

2 Gently shake the ink cartridges, and remove them from the

packaging.

3 Remove only the yellow tape from each ink cartridge.

Caution: Do not touch the areas shown above. Doing so may

prevent normal operation and printing.

4 Insert the cartridge in the holder for each color. Press each

cartridge down until it clicks. Make sure all cartridges are

pushed down into place.

5 Lower the scanner unit.

6 WF-3820: Follow the on-screen instructions to start

charging the ink.

WF-4820/WF-4830: Ink charging begins automatically.

Ink charging takes approximately 5 minutes. When you

see a completion message on the product’s LCD screen,

charging is complete.

Caution: Don’t turn off the printer or raise the scanner unit while

the printer is charging or you’ll waste ink.

Note: As part of setup, your product’s serial number will be sent

to a secure Epson server so that you can be eligible to participate

in programs we may offer from time to time, including the Epson

ink replenishment program. You will have a separate opportunity

to consent to participating in such programs.

7 Follow the on-screen instructions to select paper settings.

3 Lower the scanner unit.

Turn on and configure

1 Connect the power cord to the back of the product and to

an electrical outlet.

Caution: Do not connect to your computer yet.

Note: If an error code appears, turn off the product and

check that no protective material has been left inside the

product.

2 Raise the control panel and turn on the product.

3 Select your language, country, date, and time on the

LCD screen.

Note: You can change these settings later using the product’s

control panel. For more information, see the online User’s Guide.

Install ink cartridges

Caution: Keep the ink cartridges out the reach of children and do not

drink the ink.

Note: The included initial cartridges are designed for reliable printer

setup and cannot be used as replacement cartridges or resold. After

setup, the remaining ink is available for printing.

1 Lift up the scanner

unit until it locks into

place.

WF-3820/WF-4820/WF-4830 Series

Produkt Specifikationer

Mærke:	Epson
Kategori:	Printer
Model:	WorkForce Pro WF-4834

Har du brug for hjælp?

Hvis du har brug for hjælp til Epson WorkForce Pro WF-4834 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Printer Epson Manualer

Epson Stylus CX5400 Manual

6 Oktober 2025

Epson Artisan 710 Manual

6 Oktober 2025

Epson Stylus CX6600 Manual

6 Oktober 2025

Epson WorkForce 600 Manual

6 Oktober 2025

Epson WorkForce Pro WF-3823 Manual

6 Oktober 2025

Epson Stylus CX6400 Manual

6 Oktober 2025

Epson EcoTank ET-2803 Manual

6 Oktober 2025

Epson Expression Home XP-400 Manual

6 Oktober 2025

Epson EcoTank ET-8700 Manual

6 Oktober 2025

Epson Stylus NX415 Manual

6 Oktober 2025

Printer Manualer

Nyeste Printer Manualer

Dascom Tally 2610+ Manual

5 December 2025

Avision AP233QN Manual

5 December 2025

CUSTOM P3X Manual

5 December 2025

OKI MicroLine 5590eco Manual

5 December 2025

Avision AM233QW Manual

5 December 2025

Avision AM240AW Plus Manual

5 December 2025

Avision AM3321w Manual

4 December 2025

Avision AM4021w Manual

4 December 2025

Avision AM4332iw Pro Manual

4 December 2025

CUSTOM Q3X Manual

4 December 2025