www.EstellaEquipment.com2
USER MANUAL
INDEX
Safety Information ........................................ 2
Mixer Wiring Installation
Instructions (3 Phase) .................................. 3
Operation ....................................................... 4
Raising & Lowering the Dough Mixer ...... 5
Capacity Chart .............................................. 5
Specifications & Capacities ....................... 6
Cleaning ...........................................................7
Circuit Diagram ..............................................7
Stopping the Machine ................................. 8
Resetting the Machine ................................ 8
Troubleshooting ............................................ 9
SAFETY INFORMATION
When using electrical appliances, basic safety precautions should always be followed, including the fol-
lowing:
1. Keep the working area around the machine clean and organized.
2. Consider environmental conditions surrounding the machine. Do not use the machine in humid, wet, or
poorly lit environments. Do not use the machine close to flammable liquids or gas.
3. Keep machine away from children and non-authorized personnel. Do not permit them to go near the ma-
chine or its working area.
4. Do not touch the switch or cable with wet hands.
5. Only utilize the machine with the correct voltage to achieve optimum results.
6. Do not wear low-hanging clothing or items that may get caught in the machine. Wear non-slip shoes while
working with the machine. For hygiene and safety, keep hair tied back and wear protective gloves.
7. Do not tug on the cable to remove the plug from the outlet. Do not leave the cable near sharp objects,
water, or solvents.
8. Remove the plug when the machine is not in use, you are cleaning the machine, or when you need to
move the machine.
9. Check that the machine is not damaged prior to each use. Carefully check that all safety devices are
working, the removable parts are not blocked, there are no parts damaged, all the parts have been set up
correctly, and all conditions that could influence the regular function of the machine are in working order.
10. If the machine is damaged or there are issues during its use, turn o the machine immediately and con
tact the manufacturer for assistance or repair. Repairs should only be made by qualified technicians,
using the correct manufacturer parts. Non-compliance with these rules may voidmthe warranty.
Note: Save these instructions for future reference.
50177445017744
CONFORMS TO UL-763
CONFORMS TO NSF-8
CONFORMS TO CAN/CSA C22.2 No. 195
