EtherWAN EX41941 Manual

EtherWAN bryter EX41941

Læs gratis den danske manual til EtherWAN EX41941 (2 sider) i kategorien bryter. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om EtherWAN EX41941, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

EX41941

8/2/2022

EX41941 Hardened PoE Switch

Installation Guide

1 Unpacking

Unpack the items. Your package should

include:

 One EX41941 PoE switch

 Power input terminal block

 Wall and DIN-Rail mounting hardware

brackets

If items are missing or damaged, notify your

EtherWAN representative. Keep the carton

and packing material.

More information available at:

https://www.etherwan.com/us

For warranty information, visit:

https://www.etherwan.com/us/support/war

ranty-policy

2 Equipment Needed

 Category 5e or better cable for RJ-45

ports

 48VDC power supply with voltage

adjustable up to 56VDC and power output

to handle 120W PoE power budget.

3 Select a Location

 DIN-rail installations: Attach the bracket

on the unit using the included screws and

then mount on a DIN-rail.

 Wall installations: Attach the brackets on

the unit using the included screws and

then mount on a wall.

 Identify a power source within 6 feet (1.8

meters).

 Choose a dry area with ambient

temperature between -40 and 75ºC (-40

and 167ºF).

 Keep away from heat sources, sunlight,

warm air exhausts, hot-air vents, and

heaters.

 Make sure there is adequate airflow.

4 Connect to the Ports

The EX41941 has the following ports:

 4 10/100/1000 Mbps PoE ports

 1 10/100/1000 Mbps RJ-45 uplink port

10/100/1000BASE-T Ports

Ports 1 to 4 are gigabit copper ports that are

compliant with IEEE 802.3af/at PoE protocol,

with up to 30W power output per port. Port 5

is a gigabit copper port that can be utilized

for data uplink.

5 Connect Power

Terminal Block

Connect the unit to a suitable power supply

using appropriate wire, 18-24 AWG, rated for

105°C or higher.

Redundant power is supported. However,

only one power input is required to operate

the unit.

1. Connect power wires to the

appropriate V1+/- or V2+/- pins on

the terminal block.

2. Connect the grounding wire to the

ground screw.

3. Plug the terminal block into the

socket.

+V1- +V2-

Produkt Specifikationer

Mærke:	EtherWAN
Kategori:	bryter
Model:	EX41941

Har du brug for hjælp?

Hvis du har brug for hjælp til EtherWAN EX41941 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

bryter EtherWAN Manualer

EtherWAN ER58000 Manual

31 Oktober 2025

EtherWAN EX19164 Manual

31 Oktober 2025

EtherWAN EX19164A Manual

31 Oktober 2025

EtherWAN EX42000 Manual

31 Oktober 2025

EtherWAN EX77900 Manual

31 Oktober 2025

EtherWAN EX77000 Manual

31 Oktober 2025

EtherWAN EX73000 Manual

31 Oktober 2025

EtherWAN EX42395AT Manual

31 Oktober 2025

EtherWAN EX39924 Manual

30 Oktober 2025

EtherWAN ER59000 Manual

30 Oktober 2025

bryter Manualer

Nyeste bryter Manualer

Dahua Technology PFS3210-8ET2GF-96 Manual

26 Oktober 2025

TP-Link Omada DS106GPP Manual

19 Oktober 2025

Draytek VigorSwitch PQ2200xb Manual

17 Oktober 2025

Kramer VS-88H2 Manual

16 Oktober 2025

Lancom GS-3126X Manual

16 Oktober 2025

Lancom GS-2310 Manual

16 Oktober 2025

Lancom GS-3628X Manual

16 Oktober 2025

Lancom GS-3528 Manual

16 Oktober 2025

Eberle ZTM 2 Manual

15 Oktober 2025

Manhattan 154390 Manual

7 Oktober 2025