EtherWAN EX72000 Manual

EtherWAN bryter EX72000

Læs gratis den danske manual til EtherWAN EX72000 (2 sider) i kategorien bryter. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om EtherWAN EX72000, eller vil du spørge andre brugere om produktet?

Side 1/2
Copyright
©
2014 EtherWAN Systems, Inc. Page 1
All Rights Reserved
EX72000 rev. 1.0
12/2/2014
1 Unpacking
Unpack the items. Your package should include:
One EX72000 Series hardened managed
switch
Rack-mounting hardware brackets
One CD containing this user’s guide
If items are missing or damaged, notify your
EtherWAN representative. Keep the carton and
packing material.
2 What Else You Need
Appropriate cables for data ports
Personal computer or laptop
3 Select a Location
Desktop installations: Mount on a flat table
or shelf surface.
Rack installations: Use a 19-inch (48.3-
centimeter) EIA standard equipment rack
that is grounded and physically secure.
Identify a power source within 6 feet (1.8
meters).
Choose a dry area with ambient temperature
between -40 and 75ºC (-40 and 167ºF).
Keep away from heat sources, sunlight, warm
air exhausts, hot-air vents, and heaters.
Be sure there is adequate airflow.
Keep the switch at least 6 ft. (1.83 m) away
from the nearest source of electromagnetic
noise, such as a photocopy machine.
4 Connect to the Data Ports
Depending on the model, your switch can have
the following ports:
8, 12, 13, or 14 10/100Base-TX ports
0, 1, or 2 100Base-FX ports
0, 1, or 2 Gigabit ports
10/100Base-TX and 100Base-FX Ports
These ports come in 10/100Base-TX/FX/BX
interfaces. They can connect to devices such as
an IP surveillance camera or a Voice Over
Internet Protocol (VoIP) phone.
A. Insert one end of an appropriate cable into a
switch port.
B. Connect the other end into the Ethernet port
of the device.
C. Repeat steps A and B for each additional
device you want to connect to the switch.
Gigabit Ports
Some switch models have 1 or 2
10/100/1000Base-TX ports, 1000Base-SX/LX/BX
ports, or 2-port 1000Base SFP-combo
10/100/1000Base-TX ports.
You can connect these ports to network devices
such as a computer, printer, network video
recorder (NVR), network storage, or they can
connect to the network itself.
SFP-combo ports operate in “either/or” fashion.
This means that attaching to a 1 Gbps combo
port renders the equivalent partner combo port
unavailable.
5 Apply Power
The switch has two pairs of power inputs:
A 12-32VDC terminal block
A 12VDC jack
Only one power input is required to operate the
switch. However, redundant power supply
functionality is supported.
Terminal Block
The switch provides two power inputs on a 12-
32VDC terminal block. Only one power input is
required to operate the switch. The terminal
block has 4 terminal posts.
Pin Description
Power 2 + 12-32VDC
Power Ground
Power 1 + 12-32VDC
Power Ground
Earth Ground
Relay Output Rating 0.7A @ 12VDC, 0.35A @ 24VDC
EX72000 Managed Switch Installation Guide
Continued on next page


Produkt Specifikationer

Mærke: EtherWAN
Kategori: bryter
Model: EX72000

Har du brug for hjælp?

Hvis du har brug for hjælp til EtherWAN EX72000 stil et spørgsmål nedenfor, og andre brugere vil svare dig




bryter EtherWAN Manualer

EtherWAN

EtherWAN EX63000 Manual

30 Oktober 2025
EtherWAN

EtherWAN EX72000 Manual

30 Oktober 2025
EtherWAN

EtherWAN EX16916 Manual

30 Oktober 2025
EtherWAN

EtherWAN EX45900 Manual

30 Oktober 2025
EtherWAN

EtherWAN EX70900 Manual

30 Oktober 2025
EtherWAN

EtherWAN EX76000 Manual

30 Oktober 2025

bryter Manualer

Nyeste bryter Manualer

Kramer

Kramer VS-88H2 Manual

16 Oktober 2025
Lancom

Lancom GS-3126X Manual

16 Oktober 2025
Lancom

Lancom GS-2310 Manual

16 Oktober 2025
Lancom

Lancom GS-3628X Manual

16 Oktober 2025
Lancom

Lancom GS-3528 Manual

16 Oktober 2025
Eberle

Eberle ZTM 2 Manual

15 Oktober 2025
Manhattan

Manhattan 154390 Manual

7 Oktober 2025