EtherWAN EX76000 Manual

EtherWAN bryter EX76000

Læs gratis den danske manual til EtherWAN EX76000 (2 sider) i kategorien bryter. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om EtherWAN EX76000, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
Copyright
©
2014 EtherWAN Systems, Inc. Page 1
All Rights Reserved
EX76000 rev. 1.0
12/2/2014
1 Unpacking
Unpack the items. Your package should include:
One EX76000 Series hardened Managed
switch
Rack-mounting hardware brackets
One CD containing this user’s guide
If items are missing or damaged, notify your
EtherWAN representative. Keep the carton and
packing material.
2 What Else You Need
Appropriate cables for data ports
Personal computer or laptop
3 Select a Location
Desktop installations: Mount on a flat table
or shelf surface.
Rack installations: Use a 19-inch (48.3-
centimeter) EIA standard equipment rack
that is grounded and physically secure.
Identify a power source within 6 feet (1.8
meters).
Choose a dry area with ambient temperature
between -40 and 75ºC (-40 and 167ºF).
Keep away from heat sources, sunlight, warm
air exhausts, hot-air vents, and heaters.
Be sure there is adequate airflow.
Keep the switch at least 6 ft. (1.83 m) away
from the nearest source of electromagnetic
noise, such as a photocopy machine.
4 Connect to the Data Ports
Your switch has the following ports:
8, 12, or 16 10/100Base-TX Power over
Ethernet (PoE) ports
0, 2, or 4 100Base-FX ports
0, 1, or 2 Gigabit ports
10/100Base-TX and 100Base-FX Ports
These ports can connect to devices such as an IP
surveillance camera or a Voice Over Internet
Protocol (VoIP) phone.
The 10/100Base-TX PoE ports conform to
IEEE802.3af/at. They provide up to 15.4/30W per
port, with a total power budget of 246/480W.
A. Insert one end of an appropriate cable into a
switch port.
B. Connect the other end into the Ethernet port
of the device.
C. Repeat steps A and B for each additional
device you want to connect to the switch.
Gigabit Ports
Some switch models have 10/100/1000Base-TX
ports with no Gigabit fiber ports, or combo
10/100/1000Base-TX with 1000Base-SX/LX/BX
ports. You can connect these ports to network
devices such as a computer, printer, network
video recorder (NVR), network storage, or they
can connect to the network itself.
Combo ports operate in “either/or” fashion. This
means that attaching to a 1 Gbps combo port
renders the equivalent partner combo port
unavailable.
5 Apply DC Power
The switch has two pairs of power inputs on a
12-48VDC terminal block. Only one power input
is required to operate the switch. However,
redundant power supply functionality is
supported. The terminal block has 8 terminal
posts.
Pin Description
Power 2 + 48VDC
− Power Ground
Power 1 + 48VDC
− Power Ground
Earth Ground
Relay Output Rating 1A@24VDC
Power Failure Alarm
Two pins on the terminal block provide for power
failure detection. Do not connect a power source
to these pins.
The relay contact closes if Power 1 and Power 2
are both failed.
EX76000 Managed Switch Installation Guide

Produkt Specifikationer

Mærke: EtherWAN
Kategori: bryter
Model: EX76000

Har du brug for hjælp?

Hvis du har brug for hjælp til EtherWAN EX76000 stil et spørgsmål nedenfor, og andre brugere vil svare dig


bryter EtherWAN Manualer

EtherWAN

EtherWAN EX76000 Manual

30 Oktober 2025

bryter Manualer

Nyeste bryter Manualer

Dahua Technology

Dahua Technology PFS3210-8ET2GF-96 Manual

26 Oktober 2025
TP-Link

TP-Link Omada DS106GPP Manual

19 Oktober 2025
Draytek

Draytek VigorSwitch PQ2200xb Manual

17 Oktober 2025
Kramer

Kramer VS-88H2 Manual

16 Oktober 2025
Lancom

Lancom GS-3126X Manual

16 Oktober 2025
Lancom

Lancom GS-2310 Manual

16 Oktober 2025
Lancom

Lancom GS-3628X Manual

16 Oktober 2025
Lancom

Lancom GS-3528 Manual

16 Oktober 2025
Eberle

Eberle ZTM 2 Manual

15 Oktober 2025
Manhattan

Manhattan 154390 Manual

7 Oktober 2025