Eureka Pearl Insert Manual

Eureka Varmeapparat Pearl Insert

Læs gratis den danske manual til Eureka Pearl Insert (8 sider) i kategorien Varmeapparat. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 24 anmeldelser. Har du et spørgsmål om Eureka Pearl Insert, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Operation & Installation Instructions

Pearl Insert

Please keep these instructions for future reference.Rev C 232345

Pearl Insert 16

AF Gason Pty. Ltd. reserves the right to modify or alter specications, material etc. in the interest of product improvement.

WARRANTY

1. Subject to clauses 2 & 3 of this warranty, A.F. Gason Pty Ltd ACN 004 667 556 warrants the follow components of its heaters against defects in workmanshiping

and/or materials for the following periods from the date of purchase:

a) the rebox for ten years;

b) the paint nish for a period of months if the purchaser has followed the instructions provided by Gason in the operation and Installation Instructions manual; and12

c) all other components for 12 months except the glass, re brick lining or bae plate if, in the opinion of Gason, these items have been damaged by impact.

2. This exten ded warranty does not apply;

a) if the heater is purchased from a person who has not been authorised by Gason to sell its products;

b) if, in the opinion of Gason, the heater or any other component has been subject to abuse, misuse, alteration, modication or has not been installed, operated or maintained in

accordance with the instructions provided by Gason; or,

c) to owners other than the original purchaser.

3. If you believe that the heater you purchased contains a manufacturing defect and you wish to make a claim under this warranty, please contact an authorised Gason service

centre to arrange for an assessment.

4. If, after assessing the heater, Gason determines that the heater contains a manufacturing fault, Gason may at its discretion:

a) replace the heater;

b) repair or replace specic components of the heater; or

c) provide a full refund.

5. Parts replaced under warranty are warranted for the balance of their original warranty period.

6. If, at the discretion of Gason, the heater or any part needs to be replaced, serviced or repaired at an authorised Gason service centre, then the person claiming under this

warranty must pay all costs associated with:

a) returning the heater; and

b) the delivery or collection of any new or repaired heater.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are en to a replacement or refund for a mtitled ajor failure and for

compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality

and the failure does not amount to a major failure.

Any benets you receive under these warranties are in addition to other rights and remedies that you may have as a consumer under law in relation to the heater to which

these warranties relate.

These warranties are given by:

AF Gason Pty Ltd

Blake Street

Ararat VIC 3377

Please contact us if you have any queries on:

Phone: 03 97633200

or email us via the “Contact Us” section of our website: www.gason.com.au

650

596

855

500

680

750

290 325

835

600

850

765 680

Eureka Pearl for

masonry installation

Package dimensions:

1075Wx660Dx800H

Eureka Pearl for

ZCC installation

Package dimensions:

915Wx695Dx1025H

*Compliance Plate is located on the rear of the appliance fascia or on ZCC.

Masonry & Zero Clearance Installation

Pearl Insert 2 Pearl Insert 15

Read and follow these instructions carefully before installing and

sing this appliance.

WARNING

Safety Warnings

• A ue re with resulting damage may occur if the appliance is not installed,

operated and maintained as per this booklet.

• Never place combustible materials such as wood, paper or furniture near the

appliance.

• This appliance is designed to burn dry wood. Do not burn rubbish, driftwood,

flammable liquids or any substance containing salts or corrosives.

• This appliance must not be installed and operated in an area where kerosene,

petrol, paint thinner or other ammable liquid is used or stored.

• The ue system must be inspected and cleaned annually or sooner if required.

Failure to do so could result in an excessive buildup of creosote which may

result in a ue re, which may damage the ue or cause damage to your home.

• The surface of the appliance becomes hot during operation. Do not touch the

surface of this appliance. Keep children away from this appliance during

operation. Do not allow anyone to operate this appliance who is not familiar

with this instruction booklet.

WARNING

Paint Curing and Care

Your heater is coated with the best available heat resistant paint. Even though

he paint has been baked after application, it may require further temperature

uring. It may, if you overre the heater on its rst re, discolour. For your rst

wo or three rings, never exceed medium air setting and always have the fan

n when above low burn. Do not wipe the heater while the paint is curing. After

he paint has cured the only maintenance required to maintain the heater’s nish

s to wipe it with a soft cloth. Do not use any commercial cleaners or solvents on

he paint nish.

e are proud of the presentation of our products. If at any time you need to

reshen up the paint, your local dealer has touchup paint available for purchase.

If you have any enquiries, please contact the dealer from whom you purchased your heater:

LEASE COMPLETE:

ealer Name

ealer Address

Phone:

lease attach your original purchase dockets to this booklet for future reference.

To aid heater installation, remove door, bae system and cast iron liners to reduce

overall heater weight.

Firewood

Getting the most out of your rewood

Firewood is a sustainable source of energy and when used correctly can provide a cost eective form of heating in your

home. Too often poor heating results and operational issues are attributed to using unseasoned wood which leads to

excess smoking, causing creosote buildup and dirty glass. Wood should be stored in a dry place where good ventalition is

available. Freshly cut wood should be stored for between 12-24 months before burning.

Use only hardwood with your Eureka Pearl.

Thermal eciency

A wood’s eciency does not depend only on its type, but also on its moisture content as well as the temperature of the

combustion chamber. To achieve a greater eciency and longer burn cycle out of your Eureka Pearl, without the emissions

of hazardous particulates, your wood must be well seasoned.

Ideally, wood should not be burnt when its moisture content is above 20%. A moisture meter to measure moisture content

is a handy addition.

0% moisture

100% thermal eciency

10% moisture

88% thermal eciency

30% moisture

63% thermal eciency

50% moisture

39% thermal eciency

An example of available thermal eciency for a piece of wood as a fuel source at varying moisture levels.

The combustion process of burning wood

When wood is heated up to approximately 100 degrees celsius, moisture begins to evaporate from the fuel. There is no

heating value from the wood at this point. As moisture releases from the wood, it reduces the eciency of the combustion

process robbing heat energy from the wood. This demonstrates the importance of dry and well seasoned wood.

As rebox temperatures reach 250-300 degrees celsius, wood solids begin to break down and release volatile gases which

ignite and produce heat.

From 300+ degrees celsius, the main energy available from wood is released when fuel vapors containing up to 60% of

the wood’s potential heat is released.

Understanding combustion principles and learning how to manipulate various conditions surrounding the operation of

your Eureka Pearl enables you to achieve maximum comfort and eciency from your Australian made wood heater.

Figure 14

This heater is painted in stovebrite Metallic Black - code 6309.

Produkt Specifikationer

Mærke:	Eureka
Kategori:	Varmeapparat
Model:	Pearl Insert

Har du brug for hjælp?

Hvis du har brug for hjælp til Eureka Pearl Insert stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Varmeapparat Eureka Manualer

Eureka Stockade SRS5 Insert Manual

22 August 2024

Eureka Opal SRS4 Insert Manual

22 August 2024

Eureka Garnet SRS3 Insert Manual

22 August 2024

Eureka Opal SRS3 Freestanding Manual

10 August 2024

Eureka Solitaire SRS2 Manual

29 Juli 2024

Eureka Pearl Insert Manual

2 Marts 2024

Eureka Garnet SRS2 Freestanding Manual

11 Oktober 2023

Eureka Jewel Freestanding Manual

12 August 2023

Eureka Nugget Mk2 Manual

1 November 2022

Eureka Ruby Freestanding Manual

12 Oktober 2022

Varmeapparat Manualer

Nyeste Varmeapparat Manualer

Grunkel RAC-10 PIROS DIGITAL Manual

13 September 2025

Livoo DOM501 Manual

12 September 2025

Gorenje IR1200W Manual

12 September 2025

Gorenje IR800W Manual

11 September 2025

Master XL91 Manual

11 September 2025

Gorenje IR540W Manual

11 September 2025

Master XL9SR Manual

11 September 2025

DeLonghi HFS50D15 Manual

11 September 2025

Flex TJ 10.8/18.0 Manual

11 September 2025

Dometic TwinBoost 4000 Manual

11 September 2025