
Specifications subject to change without notice.
Copyright © 2010-2013 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
•Full color graphical display
•Detachable sensors transmit data to the display that can
be viewed from a remote location up to 65ft (20m) from
•Connect to multiple sensors on individual channel
•Trending Mode with graphical representation of live
reading for fast scanning of large areas
•Wireless sensor affixes to telescoping handle (4ft/1.2m)
for measurements in ceilings or in hard to reach areas;
Optional 9.8ft (3m) and 16.4ft (5m) handles available
•%WME (wood moisture equivalent) pin moisture reading
•Visual and audible High/Low alarm modes
•Pinless measurement depth to 0.75" (22mm) below
•2 point calibration check built into protective cap
•Cap protects pins during storage and snaps on to
•Complete with 3.7V rechargeable Li-Polymer battery,
wireless moisture sensor, external pin probe, replacement
pins, telescoping handle (4ft/1.2m), AC adaptor, protective
cap, 2G SD card, and hard case
Detachable pin/pinless sensors transmit data to the display
And can be viewed from a remote location up to 65ft (20m) from the measurement point
Wireless Combination Pin/Pinless Moisture Meter
Wireless sensor affixes to
Pinless Range/Depth 0 to 99.9 (relative)/ 0.75" (22mm)
Transmission Frequency 2.4GHz (pin/pinless sensor to display)
Transmission Range 65ft (20m) unobstructed view
Dimensions 8x2.3x1.7" (203x58.4x43.2mm)
Sensor Selection Menu Trend Mode Display
MO270................Wireless Combination Pin/Pinless Moisture Meter
MO270-X ............Optional Wireless Moisture Sensor
MO-P1 ................Remote Moisture Pin Probe for MO270
EXT-1..................Telescoping Handle (extends to 4ft/1.2m) for MO270
EXT-3..................Telescoping Handle (extends to 9.8ft/3m) for MO270
EXT-5..................Telescoping Handle (extends to 16.4ft/5m) for MO270
MO200-PINS ......Replacement Pins (50 Pins)