Extron MLC 104 IP Plus L Manual

Extron Fjernbetjening MLC 104 IP Plus L

Læs gratis den danske manual til Extron MLC 104 IP Plus L (16 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Extron MLC 104 IP Plus L, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

Global Conﬁ gurator 2.2,

MLC 226/104 Conﬁ guration Program 3.1.1, and

System 5 IP Conﬁ guration Program 3.1.1

Upgrade Guide

68-1313-01 Rev. A

08 06

PRELIMINARY

Global Conﬁgurator, Windows-based Control Programs

PRELIMINARY

Introduction

This installation guide provides step by step instructions on how to

•

Upgrade to Global Conﬁgurator 2.2

• Upgrade from GC 2.0.x

•

Upgrade from GC 2.1.x

• Upgrade to MediaLink 226/104 or System 5 IP Conﬁguration Software 3.1.1

•

Upgrade the System 5 IP with patch ﬁrmware (This includes information on how

to retain IP settings after upgrading from version 1.0x to 2.00.)

If you encounter problems with the following upgrades, please keep in mind that

Extron Technical Support (http://www.extron.com/company/contactus.asp) is only

a phone call or a few mouse clicks away.

Upgrading to Global Conﬁgurator 2.2: a Checklist

Prior to upgrading your existing Global Conﬁgurator (GC) project to GC 2.2, ensure

that the following four elements are present on your system.

cThe Global Conﬁgurator project ﬁle

For GC 2.0.x

• Original project ﬁles

For GC 2.1.x

• Original project ﬁles or

• Import a compressed project ﬁle (.gcc) or

• Import the ﬁle from an IP Link device

cThe Extron serial and IR drivers used in the project ﬁle

These drivers can be found

• On the Extron Web site (http://www.extron.com/iplinkdrivers)

• Via the Driver Subscription feature of GC 2.2

• Via the IR Learner software's user-deﬁned IR drivers (.eir)

Defective device drivers are routinely removed from the Extron Web site, so you

may ﬁnd that some drivers are missing. Most of these drivers are replaced with

newer versions.

If a required device driver is missing after you open your project in GC 2.2, and

it cannot be found on the Extron Web site, search for an updated version of the

driver. When the correct driver is found, you must upgrade it for every IP Link

device in your network.

cThe minimum ﬁrmware version for the MLC products

Global Conﬁgurator 2.2 requires the following minimum ﬁrmware

versions. Any IP Link device with an earlier version requires a ﬁrmware

upgrade. This ﬁrmware can be obtained from the Extron Web site

(http://www.extron.com/iplinkdrivers).

• MLC 104 Series, version 1.03

• MLC 104 IP Series, version 1.03

• MLC 226 IP Series, version 1.05

For IP Link devices that reside on a network, ﬁrmware can be easily upgraded

using IP Link File Manager 1.1.3 or later.

PRELIMINARY

Produkt Specifikationer

Mærke:	Extron
Kategori:	Fjernbetjening
Model:	MLC 104 IP Plus L
Vægt:	300 g
Produktfarve:	Sort
Indbygget skærm:	Ingen
Opbevaringstemperatur (T-T):	-40 - 70 °C
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Relativ luftfugtighed ved opbevaring (H-H):	10 - 90 %
Driftstemperatur (T-T):	0 - 50 °C
LED-indikatorer:	Ja
Grænseflade:	Ledningsført
Indgangstype:	Tryk på knapper
Maks. rækkevidde:	- m
Genopladelig:	Ingen
Sikkerhed:	CE, c-UL, UL