Extron TLP Pro 1225TG Manual

Extron Skærm TLP Pro 1225TG

Læs gratis den danske manual til Extron TLP Pro 1225TG (6 sider) i kategorien Skærm. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Extron TLP Pro 1225TG, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

IMPORTANT:

Go to www.extron.com for the

complete user guide and installation

instructions before connecting the

product to the power source.

TLP Pro 1225TG, 1525TG, and 1725TG • Setup Guide

Overview

The Extron® TLP Pro 1225TG, TLP Pro 1525TG, and TLP Pro 1725TG are table-top touchpanels with high resolution capacitive,

edge-to-edge glass touchscreens. The TLP Pro 1225TG has a 12.1 inch screen with a 1280x800 resolution. The TLP Pro 1525TG

has a 15.6 inch screen with a 1366x768 resolution. The TLP Pro 1725TG has a 17.3 inch screen with a 1920x1080 resolution. All

three touchpanels are ideal for any AV applications requiring large touchpanels with exible mounting options and fully customizable

interfaces. This guide provides instructions for experienced installers to mount and install these touchpanels. For more complete

details, see the at TLPPro 1225, 1525, and 1725 Series User Guide www.extron.com.

Setup Overview and Checklist

Get Ready

Download and install the latest version of the following software:

zGUI Designer — For designing layouts for Extron TouchLink® Pro touchpanels and third party touch interfaces

zGlobal Configurator® Plus and Professional — For setting up and conguring the control processor and touchpanel

zGlobal Scripter® — Provides an integrated development environment for Extron control systems programming. Global

Scripter provides an Extron-exclusive Python™ library (ControlScript®) and Global Scripter modules to get you started.

zToolbelt — For device discovery, device information, rmware updates, and conguration of network settings, system

utilities, and user management for TouchLink Pro devices.

NOTE: All four software programs are available from www.extron.com.

Obtain the following network information from your network administrator:

DHCP status (on or off). If DHCP is off, you also require:

IP address Subnet mask Gateway

Username — This can be either or .

Passwords — The factory congured passwords for all accounts on this device have been set to the device serial number.

Passwords can be changed during conguration. Passwords are case sensitive.

NOTE: If the device is reset to default settings, the passwords are reset to the default password, which is extron (for

either or ).admin user

Make a note of the touchpanel MAC address from the label on the back of the device.

Mount and Cable All Devices

ATTENTION:

• Do not power on the touchpanels until you have read the Attention in the Power Supply section of the

TLPPro 1225, 1525, and 1725 Series User Guide.

• Ne branchez pas les écrans tactiles avant d’avoir lu la mise en garde dans la section «sources d’alimentation» du

TLPPro 1225, 1525, and 1725 Series User Guide.

Mount the units. There are several mounting options for TouchLink Pro touchpanels (see on page 2). Mounting

Connect cables to the touchpanels (see on page 4).Rear Panel Features

Connect the touchpanel to a power source. These models can be powered by PoE or by a 12VDC power supply.

The TLP Pro 1725TG ships with the PI 140 power injector. A power injector or 12 VDC power supply must be purchased

separately for the 12-inch and 15-inch models.

An Extron IP Link® control processor must be connected to the same Ethernet subnetwork as the touchpanel.

Set up the Touchpanels for Network Communication

Connect the PC that you will use for setup, the control processor, and touchpanel .to the same Ethernet subnetwork

Use the (see page 6) or Toolbelt to set the DHCP status and, if necessary, the IP address, subnet mask, Setup Menu

gateway, and related settings for the touchpanel.

Conﬁgure the Touchpanels

Create a graphical user interface with GUI Designer (see for step-by-step instructions).GUI Designer Help File

Associate functions with the graphical user interface features with Global Congurator or Global Scripter.

TLP Pro 1225TG, 1525TG, and 1725TG • Setup Guide

Mounting

A range of optional mounting kits are available for these models. The

kits must be purchased separately. Follow the installation instructions

provided with the kit.

Removing the back and base covers

Some of these procedures require the back and base covers to be

removed. You must remove the back cover before you can remove the

base cover.

1. Use the provided Extron removal tool. There is one notch on each

side of the back cover (gure 1, 1). Insert the tool into the notch to

release the catch.

2. Use the removal tool to remove the base cover. There are two

notches at the back of the base (2).

2. Drill two pilot holes into the desktop.

3. Remove the base cover (see “Removing the back and base

covers”, above).

4. Insert two #10 at-head wood screws (not provided) through

the touchpanel and align them with the two pilot holes.

5. Secure the touchpanel to the tabletop.

6. Replace the base cover.

Kensington® Security Lock

For added security, attach a Kensington Security Lock (not

provided) to the metal-reinforced Kensington Security Slot

on the rear edge of the base (see gure 3, 1). The gure

shows the rear edge of the TLP Pro 1525TG base, but the

base of the TLP Pro 1225TG and TLP Pro 1725TG are very

similar. Follow the instructions that are provided by the

manufacturer to install the lock.

Desktop Mounting

These touchpanels come assembled with stands that allow them

to be placed on any suitable at surface (for example a desk,

table, or lectern).

Fixed Mounting

Figure 2 shows the base of the TLPPro1225TG, with the cover

removed to indicate the position of the mounting holes (1). The

base of the TLP Pro 1525TG and TLP Pro 1725TG are similar and

the spacing of the mounting holes is identical.

1. Mark the location for two holes, 4.96inches (126 mm) apart.

This measurement is the same for all three models.

SMA-1 Swivel Mount Adapter

To swivel either device up to 180° in either direction, use the optional Extron SMA-1 swivel mount adapter, to permanently mount the

touchpanels.

1. Remove the back cover and base cover (see “Removing the back and base covers”, above).

2. Attach the conduit, insulation disk, and swivel disk and congure the set screws to allow for the degree of swivel that is required

(see the , available at SMA-1 Swivel Mount Adapter Kit User Guide www.extron.com). Place the mounting hole in the base over

the conduit of the SMA-1.

3. Secure the unit with the backing plate and locking nut as described in the .SMA-1 Swivel Mount Adapter Kit User Guide

VESA Mounting

Use a third-party D-type VESA mounting kit with the 100 mm x 100 mm mounting pattern.

1. Remove the back cover (see “Removing the back and base covers”, above).

2. Remove the four screws holding the touchpanel to the base. There are two screws in each base attachment hinge (see

gure 2, 2, above).

3. Follow the instructions provided with the VESA mounting kit.

Figure 1. Remove the Back and Base Covers

Figure 2. Mounting Holes in TLP Pro 1225TG Base

Figure 3. Slot for Kensington Security Lock

Produkt Specifikationer

Mærke:	Extron
Kategori:	Skærm
Model:	TLP Pro 1225TG
Bredde:	324 mm
Dybde:	212 mm
Højde:	249 mm
Vægt:	4980 g
Produktfarve:	Sort
Skærmtype:	TFT
Pakkevægt:	6210 g
Pakkedybde:	318 mm
Pakkebredde:	318 mm
Pakkehøjde:	445 mm
Skærm diagonal:	12.1 "
Skærmopløsning:	1280 x 800 pixel
Skærmens lysstyrke:	340 cd/m²
Synsvinkel, horisontal:	85 °
Synsvinkel, vertikal:	85 °
Indbyggede højttaler(e):	Ja
Opbevaringstemperatur (T-T):	-20 - 60 °C
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Relativ luftfugtighed ved opbevaring (H-H):	10 - 90 %
Antal højttalere:	2
Antal HDMI-porte:	1
Ethernet LAN:	Ja
Understøttede lydformater:	LPCM, WAV
VESA montering:	Ja
Strømforbrug (typisk):	22.5 W
Driftstemperatur (T-T):	0 - 40 °C
Ethernet LAN-datahastigheder:	10, 100 Mbit/s
Intern hukommelse:	8192 MB
Husmateriale:	Plast
Frekvensområde:	400 - 20000 Hz
Sensor for omgivende lys:	Ja
Kabelteknologi:	10/100Base-T(X)
3,5 mm stik:	Ja
Farvedybde:	24 Bit
Billedformat:	16:10
Lydtryksniveau:	90 dB
Type af baggrundslys:	LED
RAM kapacitet:	2048 MB
Indgangsimpedans:	50 ohm (Ω)
Kontrastforhold:	1000:1
Antal RJ-45-porte:	1
Berøringsskærm teknologi:	Kapacitiv
Antal USB 2.0 type-A-porte:	2