Fantini Cosmi EV60 Manual

Fantini Cosmi Centralvarmekedel EV60

Læs gratis den danske manual til Fantini Cosmi EV60 (12 sider) i kategorien Centralvarmekedel. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Fantini Cosmi EV60, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

EV60

FIXED POINT DIGITAL TEMPERATURE CONTROL

UNIT FOR SANITARY WATER

USE

The EV60 control unit is suitable to be used on all

types of centralised sanitary water regulation plants.

This unit is mainly used for regulating the temperature

of sanitary water, however it may also be used

for regulating generic temperatures of rooms,

greenhouses, swimming-pools, etc...

The EV60 is provided with a special program for

thermal sterilization of the system to prevent the risk

of Legionellosis (legionnaires‘ disease).

OPERATION

The EV60 control unit constantly compares the current

read temperature with the temperature set (which

depends on the current programming) and, based on

the proportional band and the integral time, it then

determines the position of the regulating mixing valve

or controls the two-stages of the output relays.

The control unit output is expressed in percentage,

where 0% indicates that the valve shall move to the

fully closed position (or stage 1-2 off), and 100%

indicates that the valve shall move to the fully open

position (or stage 1-2 on).

TO SELECT THE REQUIRED LANGUAGE

During installation the user can select the language

FANTINI COSMI S.p.A.

Via dell’Osio, 6 20090 Caleppio di Settala, Milano - ITALY

Tel. +39 02 956821 Fax +39 02 95307006 info@fantinicosmi.it| |

EXPORT DEPARTMENT

Ph +39 02 95682229 export@fantinicosmi.it|

www.fantinicosmi.com

required to display the Menu information. With the

control unit off, keep the key + (see gure on page

5) pressed and then switch the control unit on. When

the icon “CHOOSE LANGUAGE” is displayed release

the key + and scroll the available languages using

the keys + and -. Find the required language and

then press key > to select it. Menu info will be then

displayed in the chosen language.

OUTPUT RELAYS

The three output relays have the following functions:

- Circulation pump command

- Valve opening command or stage 1 command

- Valve closing command or stage 2 command

CIRCULATION PUMP

(If present) The circulation pump is activated to

circulate water in the heating plant and it is turned off

automatically when the control unit has no output.

Pump switch-off time may be delayed by the user as

required (enter “----“ or “0” if no delay is required).

CHOOSE LANGUAGE:

--> ENGLISH

MIXING VALVE COMMAND

The mixing valve is commanded to open/close by the

two relays to allow the set temperature to reach the

value calculated by the control unit.

2-STAGE COMMAND

Instead of the mixing valve it is possible to turn on/off

the burner or another one- or two-stage connected

device (see the diagram on the right).

CALCULATED T.

TEMPERATURE

100

STAGE 1 ON

STAGE 2 ON

Produkt Specifikationer

Mærke:	Fantini Cosmi
Kategori:	Centralvarmekedel
Model:	EV60

Har du brug for hjælp?

Hvis du har brug for hjælp til Fantini Cosmi EV60 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Centralvarmekedel Fantini Cosmi Manualer

Fantini Cosmi EV60 Manual

21 Juni 2025

Centralvarmekedel Manualer

Nyeste Centralvarmekedel Manualer

Atmos DC60GSX Manual

7 Juni 2025

ACV E-Tech P 201 Manual

15 Januar 2025

Intergas H22VRTW Manual

13 Januar 2025

17 November 2024

10 Juni 2024

10 Juni 2024

9 Juni 2024

Ferroli Optimax HE Plus 25 OV Manual

22 Maj 2024

Baxi Solo 3 30 PF Manual

13 Maj 2024

Vokèra Mynute 14e Manual

13 Maj 2024