FASTCABLiNG 5380-42 Manual


Læs gratis den danske manual til FASTCABLiNG 5380-42 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om FASTCABLiNG 5380-42, eller vil du spørge andre brugere om produktet?

Side 1/2
PoE Ethernet Surge Protector EN
How Can Ethernet Surge Protector Help My PoE Camera?
If the light s the camera directly, will be burn down, but the odds of that happening are slimmer. More than 50% ing hit it ed of
the IP cameras get defecve caused by the surge or electrostac discharge which could generate from the natural
phenomenon such as lighng en the power in your POE switch. When the cameras damage, you will see the cameraev s power
indicator LED is sll , not ashing which means the switch can t communicate with the IP camera anymore. ThereON but s no
data exchange between them The FASTCABLING Ethernet surge protector can be added next to the camera the switch, . or
protect the surge from the power on switch or electrostatic discharge ing picked up by Ethernet cable. The following is the
diagram. Please don hesitate to ask any quesons. We have FQA at the end of this page. t
FAQ
1. Do I need external power?
2. Do I need to ground the protector?
It is better to ground the protector, when it has strong surge, it will release to ground instead of ring the protector.
3. Do I need to ground the camera as well?
If you have ground the protector and the camera or AP is powered ed by PoE, the protector will isolate your device. You dont
need to ground the device anymore.
4. Where should I add the protector ?
It is the best place near the PoE IP device.
5. Can it work with passive PoE injector?
Yes, It protects all 4 pair twisted cable.
6. Can it work with Gigabit network?
Yes.
7. What is included in the package?
a. 1 * Ethernet surge protector.
b. 1 * 0.2M cat5e patch cord.
Electrical Safety Informaon
1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturers
label. Connecon to a dierent power source than those specied may result in improper operation, damage to the
equipment or pose a re hazard if the limitaons are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualied service
technician.
3. The equipment requires the use of the ground wire as a part of the safety cercaon, modication or misuse can provide
a shock hazard that can result in serious injury or death.
4. Contact a qualied electrician or the manufacturer if there are quesons about the installaon prior to connecng the
equipment.
5. Protecve bonding must be installed in accordance with local naonal wiring rules and regulaons.
Need More Help?
If you require more help seng up your Ethernet surge protector, please head to our help site where you will be able to
nd the corresponding help guides and video tourist.
Visit our community:
hps://www.myfastcabling.com/
Declaraon of Conformity
We. Fastcabling LTD., hereby declare that the products:
Fastcabling Ethernet Surge Protector
is in conformity with all the essential requirements of EMC Direcve 2014/30/EU
Assessment of compliance of the product with the requirements relang to the following specicaons:
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
EN 55032:2015+AC:2016 Class A
AS/NZS CISPR 32:2015 Class A
EN 61000-3-2:2014 Class A
EN 61000-3-3:2013
EN 55035:2017


Produkt Specifikationer

Mærke: FASTCABLiNG
Kategori: Ikke kategoriseret
Model: 5380-42

Har du brug for hjælp?

Hvis du har brug for hjælp til FASTCABLiNG 5380-42 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret FASTCABLiNG Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer