FERM DSM1002 Manual

FERM Deltaslibere DSM1002

Læs gratis den danske manual til FERM DSM1002 (18 sider) i kategorien Deltaslibere. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 3 anmeldelser. Har du et spørgsmål om FERM DSM1002, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/18
Ferm b.v. ● P.O. Box 30159 ● 8003 CD 8003-NL ● Internet: www.ferm.nl 0407-07
Ferm FTS-260K
Triangular sander
Dreieckschleifer
Driehoekschuurmachine
Ponceuse triangulaire
Lijadora triangular
Sabbiatrice triangolare
Hörnslipmaskin
Kulmahiomakone
Deltasliper
Trekantsslibemaskine
∆ÚÈÁˆÓÈ΋ Á˘·ÏÔ¯·ÚÙȤڷ
íÂıÒÚÓÓÌÌflfl ¯ÎËÙÓ‚‡Î¸Ì‡fl
χ¯ËÌ͇
Szlifierka trójkątna
Üçgenli zımpara makinas›
Háromszög-csiszológép
Trojhranná bruska
Art.nr.: 326240
USER’S MANUAL
GEBRAUCHSANLEITUNG
GEBRUIKSAANWIJZING
MODE D’EMPLOI
MODEO DE EMPLEO
MANUALE UTILIZZATI
BRUKSANVISNING
KÄYTTÖOHJE
BRUKSANVISNING
BRUGER VEJLEDNING
O¢∏°π∂™ Ã∏™∂ø™
INSTRUKCJĘ OBSŁUGI
HASZNÁLATI UTASÍTÁS
NÁVOD K POUŽITÍ
L
GA
Landesgewerbeanstalt Bayern
Nürnberg
Ferm 35
AVAILABLE SPARE PARTS FOR FTS-260
REF.NR. DESCRIPTION FERM NR.
2 SPINDLE GEAR 408200
12 - 17 SANDING PAD (COMPLETE) 408201
18 FIELD COIL 408202
19 CARBON BRUSH (SET) 408203
23 ARMATURE 408204
25 ARMATURE GEAR 408205
38 SWITCH 408206
EXPLODED VIEW
Product: Ferm triangular sander
Type FTS-260K, Art.nr. 326240
Ferm, Zwolle, The Netherlands.
Sound pressure level L
pa
71,4 dB(A)
Vibration (
-
a
w
) 5,8 m/s
2
Serial nr.
CAREFULLY READ THE INSTRUCTIONS BE-
FORE YOU USE THE TRIANGULAR SANDER!
1. SPECIAL SAFETY INSTRUCTIONS
BEFORE USING THE MACHINE:
1. Check the following points.
- do the voltage of the appliance correspond
with the mains voltage, appliances for a mains
voltage of 230 V can also be connected at a
mains voltage of 220 V;
-are the mains lead and the mains plug in a good
condition: solid, without any loose ends or
damage;
2. Avoid using long extension cables.
3. Check the condition of the sandpaper. Is it not worn
or are there any cracks. Replace bad sandpaper.
WHILE USING THE MACHINE
1. If you are working with the sander, wear always
ear protection and dust mask.
2. The machine is not suitable for wet sanding.
3. Check that the switch is not in the “ON”-position
before connecting the machine to the mains voltage.
4. Always keep away the mains lead from moving
parts of the machine.
5. Use safety glasses, certain when sanding above
your head.
6. Do not bring pressure to your machine, this will
only delay the sanding.
SWITCH OFF THE MACHINE IN CASE OF:
1. The machine is overheated.
2. Defective mains plug, mains lead or damage to the
mains lead.
3. Defective switch.
4. Smoke or bad smell caused by scorched insulation.
2. USE
1. INSTALLING SANDPAPER
As the sole of your sander is provided with velcro, you can
only use sandpaper which can be fixed in the same way.
1. Pull the mains plug out of the power-point
2. Have the little gaps in the sandpaper coincide with
the little gaps in the sole and push on the paper for
fixing it on the sole.
2. APPLICATIONS
The sander can only be used for the subjoined applications.
1. Sanding wooden surfaces
2. Sanding metal surfaces
3. Polishing.
3. DUST EXTRACTION
The sanding machine is provided with a connection for
dust extraction to keep the working surface clean. This
is the opening at the back of the sander. You can con-
nect a vacuum cleaner onto this opening.
Insert the adapter into the dust extraction opening of
the triangular sanding machine. When doing so, make
sure that the adapter projections fall into the recesses
of the dust extraction opening. Turn the adapter 45
degrees clockwise. You may now insert the vacuum
cleaner tube into the adapter. The adapter is equipped
with an adapter ring, located in the back of the adapter.
For deviant tube sizes, remove the adapter ring from
the adapter.
3. OPERATION
Press the on/off switch to turn on the machine. To
regulate the speed, use the adjusting wheel.
An excessive load when the sanding machine is run-
ning at a low speed may cause the motor to burn out.
4. SANDING
The foot of the sanding machine makes small circular
movements. The result is an even, smoothly sanded
ORDER NUMBER/YEAR OF CONSTRUCTION
1'
V~ W rpm mm
326240 FTS-260K 230 260 6000-9000 90 x 90 x 90
2 Ferm
ART.NR
TYPE
;

Produkt Specifikationer

Mærke: FERM
Kategori: Deltaslibere
Model: DSM1002

Har du brug for hjælp?

Hvis du har brug for hjælp til FERM DSM1002 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Deltaslibere FERM Manualer

FERM

FERM DSM1002 Manual

6 Oktober 2022
FERM

FERM DSM1003 Manual

6 Oktober 2022
FERM

FERM DSM1009 Manual

6 Oktober 2022

Deltaslibere Manualer

Nyeste Deltaslibere Manualer

Bosch

Bosch PDA 180 Manual

6 Oktober 2022
Bosch

Bosch PSM 160 A Manual

6 Oktober 2022
Trotec

Trotec PMSS 10‑220 Manual

6 Oktober 2022
Güde

Güde DS 160-2 Manual

6 Oktober 2022
Kress

Kress CDS 6425 Manual

6 Oktober 2022
Parkside

Parkside PDS 290 A1 Manual

6 Oktober 2022
Skil

Skil 7220 AC Manual

6 Oktober 2022
Vonroc

Vonroc S2_PS502DC Manual

6 Oktober 2022
Worx

Worx WX646.1 Manual

6 Oktober 2022
Vonroc

Vonroc PS502DC Manual

6 Oktober 2022