Festo CRVZS-0.1 Manual

Festo Ikke kategoriseret CRVZS-0.1

Læs gratis den danske manual til Festo CRVZS-0.1 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Festo CRVZS-0.1, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
CRVZS
Air reservoir
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Deutschland
+49 711 347-0
www.festo.com
Operating instruction
8165848
2022-08d
[8165850]
Translation of the original instructions
© 2022 all rights reserved to Festo SE & Co. KG
1 Applicable Documents
All available documents for the product
è www.festo.com/sp.
2 Safety
2.1 Safety instructions
–Only use the product in its original condition without unauthorised modifica-
tions.
–Only use the product if it is in perfect technical condition.
–Observe the identifications on the product.
–Take into account the ambient conditions at the location of use.
–Before working on the product, switch off the compressed air supply and lock it
to prevent it from being switched on again.
–An increase in the operating pressure above the maximum permissible values
may lead to rupture of the housing. Install a suitable safety device to prevent
excess pressure.
2.2 Intended use
The compressed air reservoir is used to store group 2
è 9 Technical data fluids.
The air reservoir can be used for the following applications:
–For compensation of pressure fluctuations.
–To provide greater volumes of compressed air to supply of fast clocking drives.
–To compensate for suddenly occurring air consumption.
–For attachment to compressors.
–For vacuum applications.
2.3 Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can
evaluate the work and detect dangers. The qualified personnel have knowledge
and experience in pneumatics.
3 Additional information
–Contact the regional Festo contact if you have technical problems
è www.festo.com.
–Accessories and spare parts è www.festo.com/catalogue.
4 Product design
1
23
Fig. 1: Air reservoir without condensate drain, CRVZS-0.1 … -2
1
Air reservoir port (2x)
2
Retaining clips, loose
(with CRVZS-2: clips, welded on)
3
Air reservoir storage volume
1
34 2
Fig. 2: Air reservoir with condensate drain, CRVZS-5 … -20
1
Air reservoir port (2x)
2
Air reservoir storage volume
3
Clips, welded on
4
Condensate drain
5 Function
The operating medium is supplied and discharged at both ends of the air reservoir
via central ports. Condensate can be drained from a threaded plug on the air
reservoir on sizes CRVZS-5 … -20.
6 Mounting
WARNING
Mechanical vibrations.
Vibration can cause material fatigue and reduce the fatigue strength of the air
reservoir and fasteners.
• Protect the air reservoir from mechanical vibrations.
Due to the manufacturing process, an oxide layer remains on the inside of the air
reservoir.
• Use suitable filters between the air reservoir and other pneumatic products for
sensitive applications.
The air reservoir can be installed as follows:
–As part of a piping system.
–With retaining clips.
–With through-holes on the welded clips.
7 Maintenance
The air reservoir is maintenance-free in intended use.
• Carry out a visual and audio check on the air reservoir once a year. The
regulations of the country of use must be taken into account.
8 Fault clearance
Malfunction Cause Remedy
External damage after visual
inspection.
Material defects in the product. –Replace the product.
Improper handling of the
product.
Audible leakage The connecting parts are defec-
tive or damaged.
–Replace the faulty con-
necting part.
The product is damaged. –Replace the product.
Corrosion Improper handling of the
product.
–Replace the product.
Incorrect storage of the
product.
Tab. 1: Fault clearance
9 Technical data
CRVZS -0.1 -0.4 -0.75 -2
Certificates, declaration of conformity è www.festo.com/sp
Classification Sound engineering practice
Certification Voluntary type test TÜV Süd
Technical data, general
Mounting position Any
Type of mounting With retaining clips With
through-hole
on the
welded clips
Operating medium, group 2
fluids
Compressed air to ISO 8573-1:2010 [–:–:–]
Nitrogen
Information on operating
medium
Filtered, lubricated or non-lubricated compressed air
Temperature of medium [°C] –10 … +100
Ambient temperature [°C] –10 … +100
Volume V [l] 0.1 0.4 0.75 2
Wall thickness ea [mm] 1.5 2
Weight [g] 226 543 736 1681
CRVZS -0.1 -0.4 -0.75 -2
Technical data, pneumatic
Operating pressure PS [MPa] –0.095 … 1.6
[bar] –0.95 … 16
[psi] –13.78 … 232.1
Test pressure PT [MPa] 2.4
[bar] 24
[psi] 348.1
Max. differential operating
pressure at 100 °C (endurance
limit)
[MPa] 1.6 1.35 0.75
[bar] 16 13.5 7.5
[psi] 232 195.8 108.8
Endurance limit with vacuum [MPa] –0.095
[bar] –0.95
[psi] –13.8
Ports
Air reservoir G 1/8 G 1/4 G 1/2
Max. tightening torque [Nm] 15 23 55
Materials
Air reservoir High-alloy stainless steel
Retaining clips High-alloy stainless steel –
Clips – High-alloy
stainless
steel
Tab. 2: Technical data CRVZS-0.1 … -2
CRVZS -5 -10 -20
Certificates, declaration of conformity è www.festo.com/sp
Classification Category I Category II
Certification Voluntary type test TÜV Süd
Technical data, general
Mounting position Condensate drain underneath
Type of mounting With through-hole on the welded clips
Operating medium, group 2
fluids
Compressed air to ISO 8573-1:2010 [–:–:–]
Nitrogen
Information on operating
medium
Filtered, lubricated or non-lubricated compressed air
Temperature of medium [°C] –10 … +100
Ambient temperature [°C] –10 … +100
Volume V [l] 5 10 20
Wall thickness ea [mm] 2.5 3
Weight [g] 3581 6459 10208
Technical data, pneumatic
Operating pressure PS [MPa] –0.095 … 1.6
[bar] –0.95 … 16
[psi] –13.78 … 232.1
Test pressure PT [MPa] 2.4
[bar] 24
[psi] 348.1
Max. differential operating
pressure at 100 °C (endurance
limit)
[MPa] 0.45
[bar] 4.5
[psi] 65.3
Endurance limit with vacuum [MPa] –0.095
[bar] –0.95
[psi] –13.8
Ports
Air reservoir G1
Max. tightening torque [Nm] 130
Condensate drain G 3/8
Max. tightening torque [Nm] 27
Materials
Air reservoir High-alloy stainless steel
Clips High-alloy stainless steel
Tab. 3: Technical data CRVZS-5 … -20

Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: CRVZS-0.1

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo CRVZS-0.1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Festo Manualer

Festo

Festo KYC-63 Manual

9 Juli 2025
Festo

Festo NEBM-L10G14-EH-5-Q7N-LE12 Manual

8 Juli 2025
Festo

Festo CPX-E-8DO Manual

8 Juli 2025
Festo

Festo CRDSNU-20-80-P-A Manual

8 Juli 2025
Festo

Festo CRDSNU-16-10-P-A Manual

8 Juli 2025
Festo

Festo CPV-SC-FB-VI Manual

7 Juli 2025
Festo

Festo CRDSNU-B-16-50-P-A-MG-A1 Manual

7 Juli 2025
Festo

Festo NEBM-L10G14-EH-10-Q7N-LE12 Manual

7 Juli 2025
Festo

Festo CPX-CTEL-4-M12-5POL Manual

7 Juli 2025
Festo

Festo CRDSNU-B-25-25-PPS-A-MG-A1 Manual

7 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Goal Zero

Goal Zero TANK PRO 4000 Manual

11 Juli 2025
PAC

PAC CAM-GM51 Manual

11 Juli 2025
Yamazen

Yamazen CSWR-3080 Manual

11 Juli 2025
Vivax

Vivax BO-608FAHTD X Manual

11 Juli 2025
Phoenix Contact

Phoenix Contact IFS-CONFSTICK Manual

11 Juli 2025
Parkside

Parkside PDNB 6.3 B2 Manual

11 Juli 2025
Ikea

Ikea KALLSJÖN 004.863.51 Manual

11 Juli 2025
Ikea

Ikea GRILLSKÄR 205.232.77 Manual

11 Juli 2025
Asus

Asus Q670EM-IM-A Manual

11 Juli 2025
Nebula

Nebula Mars Manual

11 Juli 2025