Festo DADP-SP-G9-16-F Manual

Festo Ikke kategoriseret DADP-SP-G9-16-F

Læs gratis den danske manual til Festo DADP-SP-G9-16-F (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Festo DADP-SP-G9-16-F, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

DADP-SP-G9-...-F

Stop kit

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Assembly instructions

8195146

2023-07a

[8195148]

8195146

Translation of the original instructions

Applicable documents

All available documents for the product

www.festo.com/sp.

Document Product Contents

Operating instruction Mini slide DGSS –

Operating instruction Shock absorber DYEF, DYSS –

Tab. 1:

Applicable documents

2 Safety

2.1

Safety instructions

–Only mount the product on components that are in a condition to be safely

operated.

2.2 Intended use

The stop kit in combination with a shock absorber on the mini slide DGSS cush-

ions its extended end position.

3 Additional information

–

Contact the regional Festo contact if you have technical problems

www.festo.com.

–

Accessories

www.festo.com/catalogue.

4 Product Range Overview

4.1

Scope of delivery

Fig.1

Screw (2x)

Stop (1x)

Stop element (1x)

Screw (2x)

4.2

Not in scope of delivery

Fig.2

Mini slide (1x)

DGSS

Shock absorber (1x)

DYEF-G8/DYSS-G8

Product design

Fig. 3:

Product design

Thread for shock absorber

6 Assembly

Fig. 4: Pushing in stop

1. Extend the slide[A] manually.

2. Slide the stop into the slot[B].2

3. Insert the screws into the holes of the stop .1 2

4. Slide the stop to the end of the slot[B].2

Fig. 5: Mounting stop

Position the slide[A] so hole[C] is aligned with a screw .1

Tighten the screw . Observe the tightening torque.1

DADP-SP-G9 -6 -10 -16 -20

Screw M2 x 6 M2.5 x 8 M2.5 x 8 M3 x 12

[Nm] 0.3 ±15% 0.5 ±15% 0.7 ±15% 0.9 ±15%

Repeat this process for the second screw .1

Fig. 6:

Note the stop bar

•

When installing the stop element , note the position of the stop bar[C].3

Fig. 7:

Aligning stop element

Retract the slide[A] manually.

2. Position the upper edge of the stop element at the level of the thread[D].3

Fig. 8:

Attaching stop bar

1. Push the stop element upwards to the stop.3

The stop bar[C] is in contact with the slide[A].

2. Hold this position.

Produkt Specifikationer

Mærke:	Festo
Kategori:	Ikke kategoriseret
Model:	DADP-SP-G9-16-F

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo DADP-SP-G9-16-F stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Festo Manualer

Festo SIED-M18NB-ZS-S-L Manual

20 August 2025

Festo SOEG-RT-M12-PS-K-2L Manual

20 August 2025

Festo VABD-S2-1-S-C Manual

20 August 2025

Festo SIED-M18B-ZO-S-L Manual

19 August 2025

Festo VACC-S18-120-K4-27-KS4ME Manual

19 August 2025

Festo VABS-S4-1S-G14-K2 Manual

19 August 2025

Festo P.BE-CP-CO-DE Manual

19 August 2025

Festo VABS-S4-2S-G18-B-K2 Manual

19 August 2025

Festo P.BE-CP-FB5-E-FR Manual

19 August 2025

Festo P.BE-CP-DN-DE Manual

19 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

PAG Mini link 6002 Manual

4 November 2025

Wamsler K128 Manual

4 November 2025

Sonifex Redbox RB-DSD8 Manual

4 November 2025

Zotac ZBOX MI561 nano Manual

4 November 2025

MuxLab 500800-RX Manual

4 November 2025

Hawke Laser/LED Foregrip Manual

4 November 2025

Wooden Camera 213900 Manual

4 November 2025

Chauvet Freedom Flex Stick Battery Manual

4 November 2025

DS18 VOC8LD-PK Manual

4 November 2025

Sony XDCAM PXW-Z90 Manual

4 November 2025