Festo DADP-TU-F3-50 Manual

Festo Ikke kategoriseret DADP-TU-F3-50

Læs gratis den danske manual til Festo DADP-TU-F3-50 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Festo DADP-TU-F3-50, eller vil du spørge andre brugere om produktet?

Side 1/2
Translation of the original instructions
© 2021 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product www.festo.com/pk.è
Document Product Contents
Instructions Stopper cylinder DFST-...-G2 Operating
Tab. 1
2 Safety
Only mount the product on components that are in a condition to be safely
operated.
Observe tightening torques. Unless otherwise specified, the tolerance
is±20%.
2.2 Intended use
Control of toggle lever functions on stopper cylinder DFST-...-G2.
3 Product overview
3.1 Product Range Overview
3.1.1 Scope of delivery
1
Locking plate (1x)
2
Leg spring (1x)
3
Screw (1x)
M4x10
4
Split washer (2x)
5
Sleeve (1x)
6
Pin (2x)
7
Hexagon head screw (1x)
8
Washer (1x)
9
Screw (1x)
M4x15
10
Sleeve (1x)
Fig. 1
3.1.2 Not in scope of delivery
11
Stopper cylinder (1x)
DFST-...-G2
Fig. 2
3.2 Functions
Lever locking mechanism
This function fixes the toggle lever in the upper end position after it is pushed
through when stopping an object.
When the piston rod of the stopper cylinder is retracted, the toggle lever is
unlocked.
Lever deactivating mechanism
This function deactivates the stopping function after the toggle lever has been
manually pressed down.
When the piston rod of the stopper cylinder is retracted, the toggle lever is
unlocked.
4 Mounting
4.1 Assembly
The assembly alternatives for the pins determine the function.6
Lever locking mechan
ism
Lever deactivating mech
anism
Lever locking and lever
deactivating mechanism
Tab. 2 Assembly alternatives
Fig. 3 Positioning pins
1. Slide the pins into the corresponding slot for the locking plate .6 1
2. Position the pins in the clevis foot (A).6
Fig. 4 Fixing the locking plate
Slide the block[B] under the locking plate .1
Ä
Pins are fixed.6
DADPTUF3 50 63 80
X [mm] 30 30 43
Tab. 3 Height of block[B]
8107268
DADPTUF350/63/80
Toggle lever function kit
8107268
2019-04
[8107270]
Instructions| Assembly
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com


Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: DADP-TU-F3-50

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo DADP-TU-F3-50 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Festo Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

EtherWAN

EtherWAN OttoE 10H Manual

5 November 2025
Intermatic

Intermatic WP1250MXD Manual

5 November 2025
INIU

INIU P63-P1 Manual

5 November 2025
D'Addario

D'Addario PW-XPND-01 Manual

5 November 2025
DS18

DS18 VOC8PRO Manual

5 November 2025
Icron

Icron Rover 2850 Manual

5 November 2025
Amaran

Amaran Peak Manual

5 November 2025