Festo DFPK-46-17-V4 Manual

Festo Ikke kategoriseret DFPK-46-17-V4

Læs gratis den danske manual til Festo DFPK-46-17-V4 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Festo DFPK-46-17-V4, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
Translation of the original instructions
© 2021 all rights reserved to Festo SE & Co. KG
1 Applicable documents
NOTICE!
Technical data for the product can have different values in other documents. For
operation in an explosive atmosphere, the technical data in this document always
have priority.
All available documents for the product www.festo.com/sp.è
Identification mark
II 2G Ex h IIC T6…T4 Gb
II 2D Ex h IIIC T80°C…T120°C Db
0°C T£
a
+60°C £
Tab. 1
2 Safety
2.1 General safety instructions
– The device can be used under the stated operating conditions in zones 1 and
2, explosive gas atmospheres, and in zones 21 and 22, explosive dust atmo
spheres.
– Use the device in its original status without any unauthorised modifications.
– All work must be carried out outside of potentially explosive areas.
– Extraction of the operating medium outside the potentially explosive area.
– Use approved accessories.
– Only use media in accordance with the specifications. 9 Technical data.è
Media
– When using saturated steam: take vapour pressure into account when
designing the valve
Drive
– Do not open the drive (pressure in the drive or spring under tension).
– Avoid mechanical stresses on the valve. Do not use the drive as a lever.
2.2 Intended use
The piston drive DFPK is intended for use with an angle seat valve VZXA... or a
cover kit VAVCF12SCC....
2.3 Training of qualified personnel
Work on the product should only be conducted by qualified personnel. The quali
fied personnel must be familiar with installation of process automation systems.
3 Further information
– Accessories www.festo.com/catalogue.è
– Spare parts www.festo.com/spareparts.è
4 Service
Contact your regional Festo contact person if you have technical questions
èwww.festo.com.
5 Product overview
5.1 Configuration
5.1.1 Product design
1
Position indicator
2
Pneumatic connection (2)
3
Drive/angle seat valve or cover kit
interface
4
Drive housing
5
Pneumatic connection (4)
Fig. 1 Product design
Position indicator
The pneumatic position indication shows the position of the actuator stem.
Indicator cylinder above Indicator cylinder below
Actuator stem retracted, valve opened Actuator stem extended, valve closed
Tab. 2 Position indicator
5.2 Function
The piston drive DFPK is a pneumatic drive actuated by compressed gas. The
DFPK can be used for the following applications:
– valve drive in combination with angle seat valve VZXA...
– valve block solution in combination with cover kit VAVCF12SCC...
The piston drive can be supplied as a doubleacting or singleacting drive. Single
acting drives have a spring system for opening and closing the connected valve in
case of pressure drop or pressure loss.
Control valves are required for switching the piston drive.
Flow over valve seat
– Only suitable for gaseous media, because use of incompressible media
causes pressure surges in the piping.
Control function
Single-acting Double-acting
Closed by spring force or by
reduced spring force (normally
closed  NC)
Opened by spring force (nor
mally open NO)
Opening and closing by two
way pressurising with operating
medium (compressed air)
Tab. 3 Control function
8143604
DFPK
Piston drive
8143604
202009a
[8143606]
Operating instructions
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 3470
www.festo.com
6 Assembly and installation
For piston drives DFPK46... use exclusively G fittings with max. SW14.x
1. Connect angle seat valve or cover kit.
2. Connect the operating medium line.
– Pneumatic connection (2): operating medium
– Pneumatic connection (4): exhaust port for singleacting drives or operat
ing medium for doubleacting drives
3. For singleacting drives: mount the silencer in the exhaust port or use a
tubing connection for guided exhaust air.
7 Commissioning
WARNING!
The discharge of electrostatically charged parts can lead to ignitable sparks.
• Prevent electrostatic charging by taking appropriate installation and cleaning
measures.
• Include the device in the system equipotential bonding.
NOTICE!
Strong chargegenerating processes can charge nonconductive layers and coat
ings on metal surfaces.
NOTICE!
Escaping exhaust air can swirl up dust and create an explosive dust atmosphere.
NOTICE!
Related type of ignition protection: c (constructional safety)
Requirements
– Angle seat valve or cover kit is fully mounted and connected.
Checking operating conditions
1. Check operating conditions and limit values 9 Technical data.è
2. Check connection points for tightness.
3. Check compatibility of the devices in the system for maximum pressure (con
sider pressure peaks). If necessary, adjust the application parameters.
8 Disposal
ENVIRONMENT!
Dispose of the product and packaging according to the applicable provisions of
environmentally sound recycling.
9 Technical data
9.1 Technical data, general
DFPK-...
Mounting position any
Ambient temperature [°C] 0…60
Degree of protection IP65, IP67
Outdoor use weatherproof locations class C1 in accordance with
EN606541
Operating pressure [MPa] 0.5…1
[psi] 72.5…145
[bar] 5…10
Operating medium Compressed air according to ISO85731:2010 [7:4:4]
Materials
Housing Stainless steel casting
Seal FPM
Piston rod Highalloy stainless steel
Cover Stainless steel casting
Tab. 4 Technical data DFPK...
9.2 Technical data, pneumatic
Medium pressure and operating pressure DFPK-46-...-S (media flow under valve
seat, N/O) in combination with VAVC-F12-SCC-...
Nominal width DN 13 20 25
Max. medium pressure [MPa] 1.6 1.35 0.83
[psi] 232 195.8 120.4
[bar] 16 13.5 8.3
Min. operating pressure [MPa] 0.34 0.5
[psi] 49.3 72.5
[bar] 3.4 5
Tab. 5 Limit values of medium pressure and operating pressure DFPK46...S
p1 Pressure of medium
p2 Operating pressure
DN13
DN20
DN25
Fig. 2 Medium pressure and operating pressure DFPK46…S
Medium pressure and operating pressure DFPK-75-...-S (media flow under valve
seat, N/O) in combination with VAVC-F12-SCC-...
Nominal width DN 20 25 32 40 50
Max. medium pressure [MPa] 1.6 1 0.62
[psi] 232 145 89.9
[bar] 16 10 6.2
Min. operating pressure [MPa] 0.34 0.4 0.5
[psi] 49.3 58 72.5
[bar] 3.4 4 5
Tab. 6 Limit values of medium pressure and operating pressure DFPK75...S
p1 Pressure of medium
p2 Operating pressure
DN20
DN25
DN32
DN40
DN50
Fig. 3 Medium pressure and operating pressure DFPK75…S

Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: DFPK-46-17-V4

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo DFPK-46-17-V4 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Festo Manualer

Festo

Festo SIED-M18NB-ZS-S-L Manual

20 August 2025
Festo

Festo SOEG-RT-M12-PS-K-2L Manual

20 August 2025
Festo

Festo VABD-S2-1-S-C Manual

20 August 2025
Festo

Festo SIED-M18B-ZO-S-L Manual

19 August 2025
Festo

Festo VACC-S18-120-K4-27-KS4ME Manual

19 August 2025
Festo

Festo VABS-S4-1S-G14-K2 Manual

19 August 2025
Festo

Festo P.BE-CP-CO-DE Manual

19 August 2025
Festo

Festo VABS-S4-2S-G18-B-K2 Manual

19 August 2025
Festo

Festo P.BE-CP-FB5-E-FR Manual

19 August 2025
Festo

Festo P.BE-CP-DN-DE Manual

19 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Turbo Air

Turbo Air TBC-65SB-N6 Manual

2 September 2025
Speco Technologies

Speco Technologies N4WNRMM Manual

2 September 2025
Fromm & Starck

Fromm & Starck STAR_FR_04 Manual

2 September 2025
XPower

XPower BR-282A Manual

2 September 2025
Grunkel

Grunkel SAN-GRILLNG Manual

2 September 2025
Phoenix Contact

Phoenix Contact BL2 PPC AIO65 7000 Manual

2 September 2025
AVer

AVer DL10 Manual

2 September 2025
Panduit

Panduit C2CAC06ABWPAB1 Manual

2 September 2025
Rigol

Rigol HDO1204 Manual

2 September 2025
XPower

XPower A-2B Manual

2 September 2025