Festo DHAS-GA-B22-S Manual

Festo Ikke kategoriseret DHAS-GA-B22-S

Læs gratis den danske manual til Festo DHAS-GA-B22-S (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Festo DHAS-GA-B22-S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Translation of the original instructions

1 Applicable documents

All available documents for the product www.festo.com/pk.è

Document Product Contents

Instructions Adaptive shape gripper DHEF Operating

Tab. 1

2 Safety

2.1 Safety instructions

– Only assemble the product on components that are in a condition to be safely

operated.

2.2 Intended use

Grip the outside of objects in combination with adaptive shape gripper DHEF

(wearing part).

3 Product range overview

3.1 Scope of delivery

1Inverting cap (1x)

Fig. 1

3.2 Not in scope of delivery

2Adaptive shape gripper (1x)

DHEF

Fig. 2

4 Mounting

4.1 Preparation

For replacement:

• Remove old inverting cap from shape gripper instruction manual for theè

adaptive shape gripperDHEF Replacement chapter.è

4.2 Replacing inverting cap

Fig. 3 Remove old inverting cap

1. Loosen knurled nut[B].

2. Separate knurled nut[B], bayonet catch[C], threaded bush[D] and inverting

cap[A].

Fig. 4 Assemble inverting cap

• Pull inverting cap over the threaded bush[D].1

ÄSealing rim[E] is seated completely over the collar [F].

Fig. 5 Mount bayonet catch

1. Align rotation lock[X] on the bayonet catch[C] with the spring pin[G].

2. Place bayonet catch[C] on the threaded bush[D].

3. Place knurled nut[B] on the threaded bush and screw on to the stop.

Fig. 6 Mount inverting cap

1. Evert inverting cap .1

ÄThe inside of the inverting cap tip[H] is visible.

2. Press the inverting cap tip[H] into the coupling[J] of the piston rod.

ÄThe releasing ring snaps back audibly.

3. Check that O-ring[K] is undamaged and correctly seated in the slot.

Fig. 7 Close bayonet catch

1. Position bayonet catch[C] on the shape gripper .2

2. Turn bayonet catch[C] as shown by the mark (approx.45°).

ÄBayonet catch[C] audibly locks.

8104615

DHAS-GA-B22-S

Inverting cap

8104615

2019-02

[8104617]

Instructions| Assembly

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Produkt Specifikationer

Mærke:	Festo
Kategori:	Ikke kategoriseret
Model:	DHAS-GA-B22-S

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo DHAS-GA-B22-S stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Festo Manualer

Festo KYC-63 Manual

9 Juli 2025

Festo NEBM-L10G14-EH-5-Q7N-LE12 Manual

8 Juli 2025

Festo CPX-E-8DO Manual

8 Juli 2025

Festo CRDSNU-20-80-P-A Manual

8 Juli 2025

Festo CRDSNU-16-10-P-A Manual

8 Juli 2025

Festo CPV-SC-FB-VI Manual

7 Juli 2025

Festo CRDSNU-B-16-50-P-A-MG-A1 Manual

7 Juli 2025

Festo NEBM-L10G14-EH-10-Q7N-LE12 Manual

7 Juli 2025

Festo CPX-CTEL-4-M12-5POL Manual

7 Juli 2025

Festo CRDSNU-B-25-25-PPS-A-MG-A1 Manual

7 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Biltema 18-688 Manual

11 Juli 2025

Segway Ninebot KickScooter F40D II Manual

11 Juli 2025

Microchip MCP48FVB08 Manual

11 Juli 2025

Pulsar AWO654 Manual

11 Juli 2025

Unitech MS282 Manual

11 Juli 2025

Oladance OWS Sports Manual

11 Juli 2025

Nivian NVS-S7B Manual

11 Juli 2025

Danfoss DST X510 Manual

11 Juli 2025

Danfoss PVED-CC Manual

11 Juli 2025

Miniland NaturRound Bunny 89272 Manual

11 Juli 2025