Festo EADT-S-M2 Manual


Læs gratis den danske manual til Festo EADT-S-M2 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Festo EADT-S-M2, eller vil du spørge andre brugere om produktet?

Side 1/1
Operating instructions (original instructions)
8074097
2017-06
[8074099]
†‡
Tool
EADT-S-M2
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
1. Applicable documents
All available documents for this product www.festo.com/pk
Assembly instructions of the line 3
2. Safety
Switch off power supply before mounting work.
Observe applicable documents.
3. Intended use
Attachment of the screw-type lock to the plug connector.
4. Scope of delivery
1845
1d_2 1 Tool (1x)
5. Not in scope of delivery
1845
1d_3
2 Servo motor
EMME-AS
3 Line
with socket
M12/M16
4 Torque spanner
(1x)
(1x)
(1x)
6. Function
18451d_9
Fork opening (A) for screw-type locks of sockets M16.
Fork opening (B) for screw-type locks of sockets M12.
Tool holder (C) for torque spanner 4.
7. Usage
18451d_10
Apply tool 1 with the correct fork opening (A)/(B) to the screw-type
lock (D).
18451d_5
Place torque spanner 4 in the tool holder (C).
Tighten the screw-type lock (D). Observe the tightening torque
( Further applicable documents).
7a. For lines 3
3
3
33 with socket M16
18451d_7
Screw-type lock (D) lies flush with the plug connector flange (E).
1
2
3
D
B
A
C
C
4
4
E
D
D
B
A
1


Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: EADT-S-M2

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo EADT-S-M2 stil et spørgsmål nedenfor, og andre brugere vil svare dig