Festo EAHH-P2-60 Manual


Læs gratis den danske manual til Festo EAHH-P2-60 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om Festo EAHH-P2-60, eller vil du spørge andre brugere om produktet?

Side 1/2
Translation of the original instructions
© 2021 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product www.festo.com/sp.è
Document Product
User documents Electric cylinder EPCC
Electric cylinder unit EPCS
Tab. 1
2 Safety
2.1 Safety instructions
Only mount the product on components that are in a condition to be safely
operated.
Observe tightening torques. Unless otherwise specified, the tolerance is
±20%.
2.2 Intended use
Mounting of the electric cylinder EPCC or the electric cylinder unit EPCS in a flex
ible position.
2.3 Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can eval
uate the work and detect dangers. Personnel must have the relevant mechanical
training.
3 Additional Information
Accessories www.festo.com/catalogue.è
4 Product Range Overview
4.1 Scope of delivery
1Flange mounting (1x)
2Slot nut (2x)
3Shim (6x)
4Screw (6x)
Fig. 1
Shims are only required with EAH...P245/60.3
4.2 Not in scope of delivery
5Electric cylinder EPCC (1x)
Fig. 2
5Electric cylinder unit EPCS (1x)
Fig. 3
6Screw (4x)
Fig. 4
5 Assembly
Fig. 5 Fixing slot nuts
1. Position slot nuts on the flange mounting .2 1
2. Fasten slot nuts with the screws .2 4
The shims must be used with EAH...P245/60.3
Fig. 6 Fastening flange mounting
Push flange mounting into the slots of the basic profile[A] with the slot1
nuts .2
Fig. 7 Mounting flange mounting
1. Position flange mounting on basic profile[A] as required.1
8135711
EAHH-P2
Flange mounting
8135711
202101a
[8135713]
Assembly instructions
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 3470
www.festo.com
2. Tighten screws.4
EAHH-P2 25 32 45 60
M3x6 M3x6 M3x8 M5x104 Screw
[Nm] 1.4 1.4 1.8 6.4
Tab. 2
Fig. 8 Mounting electric cylinder
Mount electric cylinder with the flange mounting . Select screws5 1 6
suitable for the installation situation.


Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: EAHH-P2-60

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo EAHH-P2-60 stil et spørgsmål nedenfor, og andre brugere vil svare dig