Festo EAPM-L9-SHE Manual


Læs gratis den danske manual til Festo EAPM-L9-SHE (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Festo EAPM-L9-SHE, eller vil du spørge andre brugere om produktet?

Side 1/1
Translation of the original instructions
© 2020 all rights reserved to Festo SE & Co. KG
OMRON® is a registered trademark of its respective trademark holder in certain
countries.
1 Applicable documents
All available documents for the product www.festo.com/sp.è
Document Product
User documents Actuator
User documents Proximity switches
User documents Switch lug
Tab. 1
2 Safety
2.1 Safety instructions
Only mount the product on components that are in a condition to be safely
operated.
Observe tightening torques.
2.2 Intended use
2.2.1 Use
Mounting of an optical microsensor from OMRON for sensing the slide position
on the basic profile of an actuator.
2.2.2 Permissible components
Sensor brack
et
Actuator Proximity switches Switch lug
ELGT-BS-90
ELGT-BS-120
EAPM-L9-SHE
ELGT-BS-160
Optical microsensor
OMRON,Series EE-SX674
EAPM-L9 -...- SLE
Tab. 2
3 Product Range Overview
3.1 Scope of delivery
1Sensor bracket (1x)
2Screw (2x)
M4x6
3Slot nut (2x)
4Screw (2x)
M3x6
Fig. 1
3.2 Not in scope of delivery
5Actuator (1x)
ELGT-BS
Fig. 2
6Sensor (1x)
Series EE-SX674 (OMRON
7Connector (1x)
EE-1001/1001-1, EE-1006,
EE-1009 (OMRON
Fig. 3
4 Assembly
The switch lug, sensor bracket and proximity switch can be mounted on the left or
right of the actuator .5
Fig. 4 Mount the proximity switch on the sensor bracket
1. Fasten sensor with the screws to the sensor bracket .6 4 1
Tightening torque: 1.5Nm±10%
2. Connect the connector to the sensor .7 6
Fig. 5 Mount the sensor bracket on the actuator
1. Place slot nuts in the slot[A].3
2. Attach sensor bracket with the screws to the slot nuts .1 2 3
3. Position sensor bracket at the desired switching point.1
4. Tighten screws . Tightening torque: 2.5Nm±10%2
8140672
EAPML9SHE
Sensor bracket
8140672
2020-08
[8140674]
Assembly instructions
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com


Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: EAPM-L9-SHE

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo EAPM-L9-SHE stil et spørgsmål nedenfor, og andre brugere vil svare dig