Festo MS6-EE-1/2-V24-F1A-B Manual

Festo Ikke kategoriseret MS6-EE-1/2-V24-F1A-B

Læs gratis den danske manual til Festo MS6-EE-1/2-V24-F1A-B (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Festo MS6-EE-1/2-V24-F1A-B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

MS6-EE-...-B

On/off valve

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Operating instruction

8181863

2023-02a

[8181865]

8181863

Translation of the original instructions

Applicable documents

All available documents for the product

www.festo.com/sp.

Document Product Contents

Assembly instructions Wall mounting kit MS...-WPE(-B) –

Tab. 1:

Applicable documents

2 Safety

2.1 Safety instructions

–

Only use the product in its original condition without unauthorised modifica-

tions.

–Only use the product if it is in perfect technical condition.

–

Observe the identifications on the product.

–Take into account the ambient conditions at the location of use.

–Before working on the product, switch off the compressed air supply and lock it

to prevent it from being switched on again.

2.2

Intended use

The on-off valve pressurises and exhausts pneumatic systems. The on/off valve is

not suitable for continuous switching operation for pneumatic components.

Additional information

–Accessories

www.festo.com/catalogue.

4 Product design

Fig. 1:

Product design

Pneumatic port P1

Solenoid coil plug

(not in scope of delivery)

Manual override

Pilot valve

Pneumatic port P2

Orifice

Pneumatic port P3

Assembly

5.1 Preparing assembly

For use with reduced particle emission:

• Remove soil from the product.

5.2 Wall mounting

–

Space required above the product: 250mm³

–Space required under the product: 100mm³

–Space required left and right of the product: 30mm³

–

Shut-off valves are installed in the compressed air supply line.

• Fasten the product to the mounting surface with the mounting accessories

3 Additional information.

6 Installation, pneumatic

1. Screw the fittings into the pneumatic ports.

2. Note the maximum screw-in depth of the connector thread. Screwing in

deeper will reduce the flow rate and can damage the housing. Maximum

screw-in depth:13.5mm

3. Insert suitable tubing into the fitting to the stop.

–

Position tubing axial to the pneumatic ports.

–Do not bend the tubing more than the minimum bending radius.

Commissioning

1. Screw the silencers into pneumatic port P3 to the stop. Suitable silencers7

3 Additional information.

Mount the solenoid coil plug on the pilot valve. Suitable plugs2

3 Additional information.

3. Pressurise the system.

4. Switch the pilot valve .4

–

The product can also be switched on and off with the integrated manual

override.

There is pressure at pneumatic port P2.

When the pilot valve is switched off, the system is exhausted via pneu-4

matic port P3 .7

8 Cleaning

•

Clean the outside of the product as required with a soft cloth.

Permissible cleaning agents:

–Soap solution, maximum +60°C

–

Petroleum ether, free of aromatic compounds

9 Fault clearance

Malfunction Cause Remedy

Low flow rate (operating pres-

sure is lost with air consump-

tion).

Constriction in the supply line.

–

Check the line.

Continuous audible blowing off

at the exhaust outlet.

The valve seat is damaged.

–

Replace the product.

Tab. 2:

Fault clearance

10 Technical data

10.1

Technical data, mechanical

MS6-EE-...-B

Mounting position [°] Vertical±5

Manual override Non-detenting and detenting

Vibration resistance in accordance with

IEC60068-2-6

Severity level 2

Shock resistance in accordance with

IEC60068-2-27

Severity level 2

Pneumatic port P1 G1/2

Pneumatic port P2

Pneumatic port P3

Temperature of medium [°C] –5…+50

Ambient temperature [°C] –5…+50

Storage temperature [°C] –10…+60

Tab. 3:

Technical data, mechanical

Type of severity level (SL)

Vibration load

Frequency range [Hz] Acceleration [m/s

]

Deflection [mm]

SL1 SL2 SL1 SG2 SL1 SL2

2 8 2 8 – – 3.5 3.5… … ± ±

8 27 8 27 10 10 – –… …

27 58 27 60 – – 0.15 0.35… … ± ±

58 160 60 160 20 50 – –… …

160 200 160 200 10 10 – –… …

Shock load

Acceleration [m/s

]

Duration [ms] Shocks per direction

SL1 SL2 SL1 SL2 SL1 SL2

± ±150 300 11 11 5 5

Type of severity level (SL)

Continuous shock load

Acceleration [m/s

] Duration [ms] Shocks per direction

±150 6 1000

Tab. 4: Type of severity level (SL)

10.2

Technical data, pneumatic

MS6-EE-...-B

Operating medium Compressed air to ISO 8573-1:2010[7:4:4]

Inert gases

Information on the operating medium Lubricated operation not possible

Operating pressure [MPa] 0.3…0.7

[bar] 3…7

[psi] 43.5…101.5

Standard nominal flow rate [l/min] 5000

Standard exhaust flow rate [l/min] 4000³

Tab. 5: Technical data, pneumatic

10.3

Technical data, electrical

MS6-EE-...-B

Electrical connection Plug pattern C

Nominal voltage [VDC] 24±10%

Coil characteristics [VDC] 24

Tab. 6: Technical data, electrical

Produkt Specifikationer

Mærke:	Festo
Kategori:	Ikke kategoriseret
Model:	MS6-EE-1/2-V24-F1A-B

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo MS6-EE-1/2-V24-F1A-B stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Festo Manualer

Festo NEFM-REG6-K-0.5-B-REG6 Manual

23 Juni 2025

Festo SDBF-FDS-1L-PU-K-9-N-LE Manual

23 Juni 2025

Festo DSNU-S-25 Manual

23 Juni 2025

Festo MS6-EE-1/2-V24-F1A-B Manual

23 Juni 2025

Festo DFM-32-25-B-PPV-A-KF Manual

23 Juni 2025

Festo VAEM-L1-S-M1-25V4 Manual

22 Juni 2025

Festo NPE-120 Manual

22 Juni 2025

Festo ESNU-63-25-P-A Manual

22 Juni 2025

Festo ESNU-40 Manual

22 Juni 2025

Festo DSNU-S-12-100-P-A-MQ Manual

22 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Scosche MZ2352SRB Manual

23 Juni 2025

AUTOUTLET Wii to HDMI Converter EFU006E Manual

23 Juni 2025

Vivo DESK-AC01C Manual

23 Juni 2025

Scosche GM1599B Manual

23 Juni 2025

Fantini Cosmi ASE Manual

23 Juni 2025

AZZA Pyramid 804V Manual

23 Juni 2025

Samsung CS21A730E3 Manual

23 Juni 2025

Foster EP26BSF Manual

23 Juni 2025

Zeiss eXtended Data Manual

23 Juni 2025

Samsung LE46A551P2R Manual

23 Juni 2025