Festo MUC-50 Manual

Festo Ikke kategoriseret MUC-50

Læs gratis den danske manual til Festo MUC-50 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Festo MUC-50, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Translation of the original instructions

1 Further applicable documents

All available documents for the product www.festo.com/pk.è

Observe further applicable documents:

– Instruction manual for drive

2 Safety

2.1 Safety instructions

– Only assemble the product on components that are in a condition to be safely

operated.

– Observe tightening torques. Unless otherwise specified, the tolerance

is±20%.

2.2 Intended use

Fasten the drive to the base profile by the dove-rail connection.4

3 Further information

The dimensions of the MUC and other fastening fittings

èwww.festo.com/catalogue.

4 Product range overview

4.1 Included in delivery

1Plate (1x)

2Clip (1x/2x)

3Screw (2x)

Fig. 1 Profile mounting

4.2 Not included in the delivery

4Drive (1x) e.g. DGC, DGC-FA, DGCI

Fig. 2 Actuator

5Screw (2x)

Fig. 3 Screw

• Screws select screws suitable for the installation situation.5

MUC-... 8/12 18 25/32 40 50/63

5Screw M3 M5 M5 M6 M7

Tab. 1 Screw size

5 Assembly

Mounting variant 1 Mounting variant 2

Tab. 2 Assembly variants

• Select mounting variant.

Fig. 4 Determine support spacing

1. Determine support spacing L 1 Further applicable documents.è

2. Position plate on the support points.1

Fig. 5 Attach plate

• Fasten plate to mounting surface with screws .1 5

Fig. 6 Fixing drive

1. Position drive with the dove-tail profile(A) on the plate .4 1

2. Fasten clip with the screws to the dove-tail profile(A).2 3

ÄThe drive can still be moved.4

Fig. 7 Fastening drive

1. Position drive .4

2. Tighten screws evenly and symmetrically. 3

MUC-... 8/12 18 25/32 40 50/63

Screw M3x8 M4x12 M5x12 M6x16 M8x25

Strength 8.8 10.9

[Nm] 1.2 4.1 8.3 14 20

Tab. 3 Tightening torque

8048068

MUC

Profile mounting

8048068

2018-06

[8065945]

Instructions| Assembly

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Produkt Specifikationer

Mærke:	Festo
Kategori:	Ikke kategoriseret
Model:	MUC-50

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo MUC-50 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Festo Manualer

Festo KYC-63 Manual

9 Juli 2025

Festo NEBM-L10G14-EH-5-Q7N-LE12 Manual

8 Juli 2025

Festo CPX-E-8DO Manual

8 Juli 2025

Festo CRDSNU-20-80-P-A Manual

8 Juli 2025

Festo CRDSNU-16-10-P-A Manual

8 Juli 2025

Festo CPV-SC-FB-VI Manual

7 Juli 2025

Festo CRDSNU-B-16-50-P-A-MG-A1 Manual

7 Juli 2025

Festo NEBM-L10G14-EH-10-Q7N-LE12 Manual

7 Juli 2025

Festo CPX-CTEL-4-M12-5POL Manual

7 Juli 2025

Festo CRDSNU-B-25-25-PPS-A-MG-A1 Manual

7 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Biltema 18-688 Manual

11 Juli 2025

Segway Ninebot KickScooter F40D II Manual

11 Juli 2025

Microchip MCP48FVB08 Manual

11 Juli 2025

Pulsar AWO654 Manual

11 Juli 2025

Unitech MS282 Manual

11 Juli 2025

Oladance OWS Sports Manual

11 Juli 2025

Nivian NVS-S7B Manual

11 Juli 2025

Danfoss DST X510 Manual

11 Juli 2025

Danfoss PVED-CC Manual

11 Juli 2025

Miniland NaturRound Bunny 89272 Manual

11 Juli 2025