Festo NEBL-T12W4-E-5-N-LE4 Manual

Festo Ikke kategoriseret NEBL-T12W4-E-5-N-LE4

Læs gratis den danske manual til Festo NEBL-T12W4-E-5-N-LE4 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Festo NEBL-T12W4-E-5-N-LE4, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

NEBL-T12...4-E-...-LE4

Connecting cable

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Assembly instructions

8187643

2023-03a

[8187645]

8187643

Translation of the original instructions

Applicable documents

All available documents for the product

www.festo.com/sp.

2 Safety

2.1

Safety instructions

–Do not connect or disconnect the push-in connector while the voltage is live.

–

Do not wire or disconnect an open cable end when powered.

–Only mount the product on components that are in a condition to be safely

operated.

2.2 Intended use

The connecting cable connects electric drives to the power supply at the M12T-

coded plug.

2.3

Training of qualified personnel

Work on the product may only be carried out by qualified personnel who can

evaluate the work and detect dangers. The qualified personnel are trained in

electrical engineering.

3 Additional information

–

Accessories

www.festo.com/catalogue.

4 Structure

4.1

Product design

1 23

Fig. 1:

NEBL-T12G4-E-...-LE4

Socket M12x1, T-coded

Core (4x)

Cable

1 23

Fig. 2:

NEBL-T12W4-E-...-LE4

Socket M12x1, T-coded

Core (4x)

Cable

4.2 Contact assignment

Electrical connection1

Field device side

Insulated wire

Electrical connection2

Controller side

1 BN Open end

2 WH

3 BU

4 BK

Colour code in accordance with IEC 60757:2021-06

Tab. 1: Contact assignment

5 Assembly

5.1 Assembly, field device side

1. Align the socket to fit the plug.1

2. Connect the socket to the plug.1

3. Tighten the screw-type lock of the socket . Tightening1

torque:0.4Nm±55%

5.2

Assembly, controller side

1. Strip and assemble the cable sheath and insulated wires as required.

Connect the insulated wires in accordance with the contact assignment.

5.3

Wiring

Character-

istic

Cable characteristic Wiring

-E Suitable for energy chains In energy chain or flexible

Tab. 2: Wiring

5.4

Strain relief

Strain relief for movable wiring:

• Fix the cable sheath in the area of the wire ends.

The insulated wires must not be subjected to force.

5.5

Mounting in energy chain

1. Lay out the energy chain lengthways.

2. Place the cables in the energy chain without twisting them.

3. Separate cables from each other using separators/drilled holes.

Do not bind cables in bundles.

Maintain spaceX. X 10%of the cable diameterD.>

With the energy chain hanging vertically: increase the spaceX.

Align the energy chain in the working position:

–Make sure that the radius is greater than the bending radiusR of the

cables.

–The cables can move freely in the bending radius KR of the energy chain.

The cable movement is not forced by the energy chain.

Mount the energy chain corresponding instruction manual.è

Fasten the cables:

–

for short energy chains with a length 1m at both ends of the energy<

chain

–for long sliding energy chains with a length 1m at the driver end only>

Do not move cables all the way to the fastening point.

The mounting spaceA between the fastening point and bending move-

ment is maintained.

NOTICE

Damage to cables if the chain breaks.

• Replace cables after a chain break.

NOTICE

Malfunction and material damage due to vertically suspended cables.

The cables stretch.

• Regularly check the length of the cables.

•

Readjust the cables if required.

6 Technical data

NEBL-T12...4-E-...-LE4

Certificates, declaration of conformity

www.festo.com/sp

Cable characteristic Suitable for energy chains

Cable composition [mm²] 4x1.5

Shielding No

Cable diameter D [mm] 8.4

Mounting space A [mm] 168³

Current rating at 40°C [A] 12

Surge resistance [kV] 1.5

Operating voltage rangeDC U

[V] 0…63

Bending radius

Fixed cable installation R [mm] 42³

Flexible cable installation R [mm] 84³

Ambient temperature

Fixed cable installation [°C] –25…+80

Flexible cable installation [°C] –25…+80

Material

Cable sheath TPE-U(PUR)

Insulating sheath PP

Electrical connection1

Function Field device side

Connection type Socket

Connection technology M12x1 T-coded in accordance with

EN61076-2-111

Type of mounting Screw-type lock

Degree of protection In assembled

state

IP65, IP67

Electrical connection2

Function Controller side

Connection type Cable

Connection technology Open end

Wire ends Sheath removed

Tab. 3: Technical data

Produkt Specifikationer

Mærke:	Festo
Kategori:	Ikke kategoriseret
Model:	NEBL-T12W4-E-5-N-LE4

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo NEBL-T12W4-E-5-N-LE4 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Festo Manualer

Festo ESNU-32-25-P-A Manual

22 Juni 2025

Festo EAPR-S1-S-33-500/530-S Manual

22 Juni 2025

Festo DGST-25-80-PA Manual

22 Juni 2025

Festo EAPR-S1-S-33-600/630-S Manual

22 Juni 2025

Festo DFM-16-25-B-PPV-A-KF Manual

22 Juni 2025

Festo VMPA2-B8-R7C2-C-06 Manual

22 Juni 2025

Festo DFM-32-25-B-PPV-A-GF Manual

22 Juni 2025

Festo DFM-20-80-B-PPV-A-GF Manual

22 Juni 2025

Festo NEBL-T12W4-E-5-N-LE4 Manual

22 Juni 2025

Festo VOVK-BT6-M32C-MN-5T1P-FB Manual

21 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Life On Products LCAWA013 Manual

22 Juni 2025

Fantini Cosmi K55A Manual

22 Juni 2025

Microchip MPFS095T Manual

22 Juni 2025

Mondial Turbo Premium L-1000FB Manual

22 Juni 2025

SilverCrest SURQ 4 A1 Manual

22 Juni 2025

Mondial Turbo Premium L-1000RB Manual

22 Juni 2025

Mondial Flex Clipper CR-04 Manual

22 Juni 2025

Campomatic AC50MF Manual

22 Juni 2025

Baltic Compact 100 Manual

22 Juni 2025

Chapin 97902 Manual

22 Juni 2025