Festo NEFM-REG6-K-0.5-B-REG6 Manual

Festo Ikke kategoriseret NEFM-REG6-K-0.5-B-REG6

Læs gratis den danske manual til Festo NEFM-REG6-K-0.5-B-REG6 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Festo NEFM-REG6-K-0.5-B-REG6, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

NEFM-REG6-K-...-B-REG6

Adapter

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Deutschland

+49 711 347-0

www.festo.com

Assembly instructions

8164713

2021-10b

[8164715]

Translation of the original instructions

SAFT®, TOSHIBA®, maxell® are registered trademarks of the respective trade-

mark owners in certain countries.

Applicable documents

All available documents for the product

www.festo.com/sp.

Document Product

User documents Servo motor EMMB-AS

User documents Servo drive CMMB-AS

Tab. 1

2 Safety

2.1

Safety instructions

–Only mount the product on components that are in a condition to be safely

operated.

2.2 Intended use

The adapter connects a servo motor EMMB-AS (with multiturn encoder) with a

servo drive CMMB-AS.

2.3 Training of qualified personnel

Work on the product may only be carried out by qualified personnel who can

evaluate the work and detect dangers. The qualified personnel are trained in

electrical engineering.

3 Structure

3.1 Product design

Fig.1

Socket

Battery housing

Cable

Plug

3.2 Recommended batteries; not in scope of delivery

Fig.2

Battery with

socket JAE IL-2S-S3L-(N)

Battery 5

TOSHIBA

ER6V

SAFT

LS14500

maxell

ER6C

Voltage [V] 3.6 3.6 3.6

Capacity [mAh] 2000 2600 1800

Maximum diameter [mm] 14.6 15 14.5

Maximum length (incl.

connections)

[mm] 52 54.8 51

Service life (approx.) [a] 2.2 3 2

Tab. 2: Specification of the battery

3.3

Contact assignment

Electrical connection 1

Field device side

Electrical connection 2

Controller side

1 Socket Pin Allocation/

Signal

Allocation/

Signal

Pin Plug con-4

nector

1 +5V 5

2 GND 2

3 BAT+ Not assigned 3

4 BAT– Not assigned 1

5 SD 4

6 /SD 6

Tab. 3: Contact assignment

4 Assembly

4.1 Installation of the battery

The battery can be installed with the adapter plugged in.

•

Shut off the controller release on the servo drive.

Fig. 3:

Opening battery housing

Align the battery housing so the labelling is legible.2

Press in the centre of the bottom part [B] and lift the cover [A] at the same

time.

Remove the top part [A].

4. Remove the bottom part [B].

Fig. 4:

Checking contact assignment

• Check the contact assignment of the socket (X) of the battery and correct if5

necessary.

Fig. 5:

Attaching push-in connector

•

Wire the battery with push-in connector.5

Fig. 6: Closing battery housing

1. Insert the battery and push-in connector into the bottom part [B].5

2. Position the top part [A] and engage it. Do not pinch wires [G].

4.2 Mounting electrical connection 1

1. Align the socket to fit the plug.1

2. Connect the socket to the plug.1

Plug audibly engages.

4.3 Mounting electrical connection 2

Align the plug to match the socket.4

2. Insert the plug into the socket.4

The plug audibly engages.

5 Replacement of the battery

The battery can also be replaced when the machine is switched on and the

adapter is plugged in.

If possible, replace the battery within 10 seconds. If the replacement takes longer,

the servo motor switches to the "Not referenced" status and the saved absolute

position is deleted. Reference the axis again, if necessary.

The life of the battery depends on the frequency of use. The service life is reduced

the more often the machine/system is switched off and the absolute position of

the servo motor has to be maintained via the battery.

•

Shut off the controller release on the servo drive.

Fig. 7:

Opening battery housing

Align the battery housing so the labelling is legible.2

Press in the centre of the bottom part [B] and lift the cover [A] at the same

time.

Remove the top part [A].

Remove the bottom part [B].

Fig. 8:

Disconnecting push-in connector

1. Pull apart the push-in connector.

Dispose of battery [E] in an environmentally friendly manner.

3. Install the new battery 5

4.1 Installation of the battery.

6 Technical data

NEFM-REG6-K-...-B-REG6

Cable characteristic Standard

Cable composition [mm²] 4x2x0.081 + 1x2x0.205

Shielding Shielded

Cable diameter D [mm] 6.8

Current rating at 40 °C [A] 1.6

Surge resistance [kV] 2

Operating voltage range

AC U

[V] 0 … 30

DC U

[V] 0 … 30

Bending radius

Fixed cable installation R [mm] 68³

Ambient temperature

Fixed cable installation [°C] –40 … +80

Material

Cable sheath PVC

Insulating sheath PVC [SR-PVC]

Electrical connection 1

Function Field device side

Connection type Socket

Connection technology Plug pattern RE

Degree of protection IP20 In assembled state

Electrical connection 2

Function Controller side

Connection type Plug connector

Connection technology Plug pattern RE

Degree of protection IP20 In assembled state

Tab. 4: Technical data

Produkt Specifikationer

Mærke:	Festo
Kategori:	Ikke kategoriseret
Model:	NEFM-REG6-K-0.5-B-REG6

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo NEFM-REG6-K-0.5-B-REG6 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Festo Manualer

Festo SIED-M18NB-ZS-S-L Manual

20 August 2025

Festo SOEG-RT-M12-PS-K-2L Manual

20 August 2025

Festo VABD-S2-1-S-C Manual

20 August 2025

Festo SIED-M18B-ZO-S-L Manual

19 August 2025

Festo VACC-S18-120-K4-27-KS4ME Manual

19 August 2025

Festo VABS-S4-1S-G14-K2 Manual

19 August 2025

Festo P.BE-CP-CO-DE Manual

19 August 2025

Festo VABS-S4-2S-G18-B-K2 Manual

19 August 2025

Festo P.BE-CP-FB5-E-FR Manual

19 August 2025

Festo P.BE-CP-DN-DE Manual

19 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Turbo Air TBC-65SB-N6 Manual

2 September 2025

Speco Technologies N4WNRMM Manual

2 September 2025

Fromm & Starck STAR_FR_04 Manual

2 September 2025

XPower BR-282A Manual

2 September 2025

Grunkel SAN-GRILLNG Manual

2 September 2025

Phoenix Contact BL2 PPC AIO65 7000 Manual

2 September 2025

AVer DL10 Manual

2 September 2025

Panduit C2CAC06ABWPAB1 Manual

2 September 2025

Rigol HDO1204 Manual

2 September 2025

XPower A-2B Manual

2 September 2025