Festo PEV-1/4-A-WD Manual

Festo Ikke kategoriseret PEV-1/4-A-WD

Læs gratis den danske manual til Festo PEV-1/4-A-WD (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Festo PEV-1/4-A-WD, eller vil du spørge andre brugere om produktet?

Side 1/2
PEV-1/4-A-WD
Angled plug socket
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Assembly instructions
8189918
2023-12a
[8189920]
8189918
Translation of the original instructions
© 2024 all rights reserved to Festo SE & Co. KG
1 Applicable Documents
All available documents for the product
èwww.festo.com/sp.
2 Safety
2.1 Safety instructions
Before working on the product: Switch off the power supply, ensure that it is off
and secure it against being switched on again.
2.2 Intended use
The angled plug socket is a plug connector that can be assembled and connects
the pressure switch PEV-1/4-A-SW27 with a controller.
2.3 Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can
evaluate the work and detect dangers. The qualified personnel are trained in
electrical engineering.
3 Additional information
Contact the regional Festo contact if you have technical problems
èwww.festo.com.
Accessories and spare parts èwww.festo.com/catalogue.
4 Product Range Overview
4.1 Scope of delivery
1 2 3
4
5
6
Fig.1
1
Pressure screw (1x)
2
Washer (1x)
3
Seal (1x)
4
Central screw (1x)
5
Housing (1x)
6
Contact holder (1x)
with screw terminals
4.2 Not in scope of delivery
7 8
Fig.2
7
Pressure switch (1x)
PEV-1/4-A-SW27
8
Cable (1x)
5 Contact assignment
Electrical connection1
Field device side
Connection Electrical connection2
Controller side
1 Operating voltage 1
2 N/C contact 2
3 Earthing 3
4 N/O contact 4
Tab. 1: Contact assignment
6 Assembly
6.1 Preparation
4
5
Fig.3
Screw the central screw out of the housing .4 5
5
6
Fig.4
Press the contact holder out of the housing .6 5
1 2 3
5
Fig.5
1. Unscrew the pressure screw .1
2. Remove the washer and the seal from the housing .2 3 5


Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: PEV-1/4-A-WD

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo PEV-1/4-A-WD stil et spørgsmål nedenfor, og andre brugere vil svare dig