Festo SD-SUB-D-BU9 Manual

Festo Ikke kategoriseret SD-SUB-D-BU9

Læs gratis den danske manual til Festo SD-SUB-D-BU9 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Festo SD-SUB-D-BU9, eller vil du spørge andre brugere om produktet?

Side 1/1
Translation of the original instructions
© 2021 all rights reserved to Festo SE & Co. KG
1 Applicable Documents
All available documents for the product www.festo.com/sp.è
2 Safety
2.1 Safety instructions
Do not connect or disconnect plug connector when powered.
Only mount the product on components that are in a condition to be safely
operated.
2.2 Intended Use
Socket SUB-D for multi-pin plug connection, can be freely assembled.
2.3 Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can eval-
uate the work and detect dangers. The qualified personnel are trained in electrical
engineering.
3 Product Range Overview
3.1 Scope of delivery
1Cable fitting (1x)
2Screw (2x)
3Contact holder (1x)
4Cover (1x)
5Spring loaded contact (9x/25x)
Fig. 1
3.2 Not in scope of delivery
6Cable
Fig. 2
4 Assembly
Fig. 3
1. Disconnect cable fitting .1
2. Guide cable through the cable fitting and the cover .6 1 4
3. Strip cable approx.40mm.
4. Strip insulation from wires approx.3mm.
5. Crimp spring loaded contacts to wires.5
The contact holder can be mounted in two different positions. The cable outlet dir-
ection of the mounted socket depends on the orientation of the contact holder.
Fig. 4
6. Align the contact holder in accordance with the desired cable outlet direc-3
tion.
Fig. 5
7. Insert the wires with the spring loaded contacts into the contact holder 5 3
and engage.
8. Pull the cable back so that a piece of cable sheath remains within the cov-6
er .4
Fig. 6
9. Place the contact holder in the cover . Avoid cable twist during insertion.3 4
10. Tighten cable fitting .1
11. Fasten the contact holder so that it is floating using the two screws .3 2
5 Technical data
SD-SUB-D-... BU9 BU25
Cable diameter D [mm] 6 ... 9 7 ... 12
Cable fitting Pg9 Pg11
Type of mounting 2 screws M3x16
Mounting position any
Nominal operating voltage DC UB[V] 24
Current rating [A] 5
Material
Housing PA
Tab. 1 Technical data
8138547
SD-SUB-D-BU9/-BU25
Plug socket
8138547
2021-01a
[8138549]
Assembly instructions
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com


Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: SD-SUB-D-BU9

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo SD-SUB-D-BU9 stil et spørgsmål nedenfor, og andre brugere vil svare dig