Festo SFAB-1000U-WQ10-2SV-M12 Manual

Festo Ikke kategoriseret SFAB-1000U-WQ10-2SV-M12

Læs gratis den danske manual til Festo SFAB-1000U-WQ10-2SV-M12 (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Festo SFAB-1000U-WQ10-2SV-M12, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

SFAB

Flow sensor

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Deutschland

+49 711 347-0

www.festo.com

Operating instructions

8156241

2021-05d

[8156243]

Translation of the original instructions

1 About this document

1.1 Applicable Documents

All available documents for the product

è www.festo.com/sp.

2 Safety

2.1 General safety instructions

–Only use the product in original status without unauthorised modifications.

–Only use the product if it is in perfect technical condition.

–Observe labelling on the product.

–Condensation, oil mist, foreign matter and other contaminants in the com-

pressed air can damage the product. Only use media in accordance with the

specifications Technical data.è

–This product can generate high frequency malfunctions, which may make it nec-

essary to implement interference suppression measures in residential areas.

2.2 Intended use

The SFAB is designed to monitor changes in the flow rate and air consumption of

gaseous media in piping systems or terminals in industry.

2.3 Training of qualified personnel

Work on the product may only be carried out by qualified personnel who can

evaluate the work and detect dangers. The qualified personnel have skills and

experience in dealing with electropneumatic (open-loop) control technology.

2.4 Range of application and approvals

Certain configurations of the product have been certified by Underwriters Labora-

tories Inc. (UL) for the USA and Canada. These configurations bear the following

mark:

Fig.1

UL Recognized Component Mark for Canada and the United States. Only for

connection to an NEC Class 2 supply. Raccorder Uniquement a un circuit de Classe

Observe the following if the UL requirements are to be complied with in your

application:

• Regulations for complying with the UL certification can be found in the sepa-

rate UL-specific special documentation. The technical data listed there take

priority.

• The technical data in this documentation may show values deviating from this.

3 Additional information

–Contact the regional Festo contact if you have technical problems

è www.festo.com.

–Accessories and spare parts è www.festo.com/catalogue.

4 Product overview

4.1 Product design

Fig. 2: SFAB

1 Supply port 1

2 Display

3 B pushbutton

4 Edit button

5 A pushbutton

6 Plug for the electrical connection

(M12)

7Hole for plate mounting

8 Supply port 2

9 Mounting slide for H-rail and wall

mounting (rear)

4.2 Functional principle

The SFAB uses a thermal measurement method. Here, the amount of heat drawn

from a heated surface of the sensor by the medium flowing past it is calculated.

Through the amount of heat removed, the flow rate or accumulated air consump-

tion is determined and shown on the display. The connection to higher-level

systems is implemented through 2 binary outputs (Out A/OutB) and one analogue

output. Switching points can be defined for both binary outputs. Switching points

for both binary outputs are possible for flow rate measurement, a consumption

switching pulse for output A (OutA) is possible for cumulative air consumption

measurement. The combination of cumulative air consumption measurement

(OutA) and flow rate measurement (OutB) is possible. The flow value is output

via the analogue output.

5 Assembly

5.1 H-rail (manifold assembly)

1. Maintain lateral distance x = 10 mm to earthed surfaces.

2. Hang SFAB in H-rail.

3. Press SFAB in the direction of the arrow.

ÄSFAB snaps into place.

5.2 Wall mounting

1. Maintain lateral distance x = mm to earthed surfaces.

Produkt Specifikationer

Mærke:	Festo
Kategori:	Ikke kategoriseret
Model:	SFAB-1000U-WQ10-2SV-M12

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo SFAB-1000U-WQ10-2SV-M12 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Festo Manualer

Festo SIED-M18NB-ZS-S-L Manual

20 August 2025

Festo SOEG-RT-M12-PS-K-2L Manual

20 August 2025

Festo VABD-S2-1-S-C Manual

20 August 2025

Festo SIED-M18B-ZO-S-L Manual

19 August 2025

Festo VACC-S18-120-K4-27-KS4ME Manual

19 August 2025

Festo VABS-S4-1S-G14-K2 Manual

19 August 2025

Festo P.BE-CP-CO-DE Manual

19 August 2025

Festo VABS-S4-2S-G18-B-K2 Manual

19 August 2025

Festo P.BE-CP-FB5-E-FR Manual

19 August 2025

Festo P.BE-CP-DN-DE Manual

19 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kenu Airframe Wireless AFW-KK-NA Manual

4 November 2025

Beverage-Air Horizon HF1HC-1HS Manual

4 November 2025

EKO K400FDGC Manual

4 November 2025

Intermatic OP5GY24 Manual

4 November 2025

Abus Secoris BUBE60020 Manual

4 November 2025

Hillvert HT-TEMPLE-1 Manual

4 November 2025

Yamazen KABF-120H Manual

4 November 2025

RADEMACHER RolloTron Standard 1300 Manual

4 November 2025

ANCEL MT700 Manual

4 November 2025

Schneider Homeline HOM250PSPD Manual

4 November 2025