Festo VABM-B10-20-G38-3-P53 Manual

Festo Ikke kategoriseret VABM-B10-20-G38-3-P53

Læs gratis den danske manual til Festo VABM-B10-20-G38-3-P53 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Festo VABM-B10-20-G38-3-P53, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Assembly instructions (Original instructions)

8067341

1701c

[8067343]

†‡

Common supply manifold

VABM-B10-20-...-P53

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

1. Applicable documents

All available documents for the product  www.f

esto.com/pk

2. Safety

Switch off compressed air before mounting work.

Observe tigh

tening torques.

3. Intended use

Pneumatic linking of the valves.

4. Further info

rmation

Accessories for VABM  www.fes

to.com/catalogue

5. Scope of delivery

20260d_1

VABM-B10-20-...-P53

1 Common supply

manifold

2 Blanking plug B-3/8

3 Screw M3x40

1)2)

4 Screw M3x30

1)2)

5 Screw M4

(thread-cutting)

6 Mounting bracket

7 Seal

(1x)

(nx)

(8x)

(2x)

(nx)

20260d_2

VABM-B10-20-...-P53-E

1 Common supply

manifold

2 Blanking plug B-3/8

3 Screw M3x40

1)2)

4 Screw M3x30

1)2)

5 Screw M4

(thread-cutting)

6 Mounting bracket

7 Seal

(1x)

(nx)

(4x)

(1x)

(nx)

6. Not in scope of delivery

20260d_3

8 Solenoid valve

VUVS-... or

pneumatic valve

VUWS-...

(nx)

The number of screws , seals 3 4/7 and valves 8 is dependent on the available valve

positions.

Number = 2 x available valve positions

7. Mounting the mounting bracket 6

7a. VABM-B10-20-...-P53

20260d_4

Define alignment of

the common supply

manifold 1.

20260d_7

Place both mounting

brackets 6 on the common

supply manifold 1.

Tighten all screws 5. If you

screw it in again, use the

threads already present.

7b. VABM-B10-20-...-P53-E

20260d_5

Define alignment of

the common supply

manifold 1.

20260d_8

Place the mounting

bracket 6 on the common

supply manifold 1.

Tighten all screws 5. If you

screw it in again, use the

threads already present.

8. Mounting of blanking plugs 2

2026

0d_6

Screw the blanking plug 2

in at the desired position,

as required.

9. Mounting of valve 8

Information

Screws 4 can only be mounted with solenoid valves 8 VUVS-LK…-S.

20260d_9

/ Push screws 3 4 into the

drill holes of the valve 8.

 Only screws 3 are

loss-protected.

Push seal 7 into channel 1

of the valve 8. Rotating

movement required during

mounting.

Place channel 1 of the

valve 8 onto the

opening (A).

Position the valve 8 on

the threads (B).

Tighten screws 3 4/ .

3 Nm _ 20 %

1.4 Nm _ 20 %

A B

8.5 Nm

_ 15 %

Produkt Specifikationer

Mærke:	Festo
Kategori:	Ikke kategoriseret
Model:	VABM-B10-20-G38-3-P53

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo VABM-B10-20-G38-3-P53 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Festo Manualer

Festo KYC-63 Manual

9 Juli 2025

Festo NEBM-L10G14-EH-5-Q7N-LE12 Manual

8 Juli 2025

Festo CPX-E-8DO Manual

8 Juli 2025

Festo CRDSNU-20-80-P-A Manual

8 Juli 2025

Festo CRDSNU-16-10-P-A Manual

8 Juli 2025

Festo CPV-SC-FB-VI Manual

7 Juli 2025

Festo CRDSNU-B-16-50-P-A-MG-A1 Manual

7 Juli 2025

Festo NEBM-L10G14-EH-10-Q7N-LE12 Manual

7 Juli 2025

Festo CPX-CTEL-4-M12-5POL Manual

7 Juli 2025

Festo CRDSNU-B-25-25-PPS-A-MG-A1 Manual

7 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Biltema 18-688 Manual

11 Juli 2025

Segway Ninebot KickScooter F40D II Manual

11 Juli 2025

Microchip MCP48FVB08 Manual

11 Juli 2025

Pulsar AWO654 Manual

11 Juli 2025

Unitech MS282 Manual

11 Juli 2025

Oladance OWS Sports Manual

11 Juli 2025

Nivian NVS-S7B Manual

11 Juli 2025

Danfoss DST X510 Manual

11 Juli 2025

Danfoss PVED-CC Manual

11 Juli 2025

Miniland NaturRound Bunny 89272 Manual

11 Juli 2025