Festo VABM-B10-25-G12-4-P53 Manual

Festo Ikke kategoriseret VABM-B10-25-G12-4-P53

Læs gratis den danske manual til Festo VABM-B10-25-G12-4-P53 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Festo VABM-B10-25-G12-4-P53, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Assembly instructions (Original instructions)

8067349

1701c

[8067351]

†‡

Common supply manifold

VABM-B10-25-...-P53

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

1. Applicable documents

All available documents for the product  www.f

esto.com/pk

2. Safety

Switch off compressed air before mounting work.

Observe tigh

tening torques.

3. Intended use

Pneumatic linking of the valves.

4. Further info

rmation

Accessories for VABM  www.fes

to.com/catalogue

5. Scope of delivery

20520d_1

VABM-B10-25-...-P53

1 P manifold rail

2 Blanking plug B-1/2

3 Screw M4x50

1)2)

4 Screw M4x40

1)2)

5 Screw M4

(thread-cutting)

6 Mounting bracket

7 Seal

(1x)

(nx)

(8x)

(2x)

(nx)

20520d_2

VABM-B10-25-...-P53-E

1 P manifold rail

2 Blanking plug B-1/2

3 Screw M4x50

1)2)

4 Screw M4x40

1)2)

5 Screw M4

(thread-cutting)

6 Mounting bracket

7 Seal

(1x)

(nx)

(4x)

(1x)

(nx)

6. Not in scope of delivery

20520d_3

8 Solenoid valve

VUVS-... or

pneumatic valve

VUWS-...

(nx)

The number of screws , seals 3 4/7 and valves 8 is dependent on the available valve

positions.

Number = 2 x available valve positions

7. Mounting the mounting bracket 5

7a. VABM-B10-25-...-P53

20520d_4

Define alignment of the

P manifold rail 1.

20520d_6

Place both mounting

brackets 6 on the

P manifold rail 1.

Tighten all screws 5. If you

screw it in again, use the

threads already present.

7b. VABM-B10-25-...-P53-E

20520d_5

Define alignment of the

P manifold rail 1.

20520d_7

Place the mounting

bracket 6 on the

P manifold rail 1.

Tighten all screws 5. If you

screw it in again, use the

threads already present.

8. Mounting of blanking plugs 2

2052

0d_8

Screw the blanking plug 2

in at the desired position, as

required.

9. Mounting valve 8

Information

Screws 4 can only be mounted with solenoid valves 8 VUVS-LK…-S.

20520d_9

/Push screws 3 4 into the

drill holes of the valve 8.

 Only screws 3 are

loss-protected.

Push seal 7 into channel 1

of the valve 8. Rotating

movement required during

mounting.

Place channel 1 of the

valve 8 onto the

opening (A).

Position the valve 8 on

the threads (B).

Tighten screws 3 4/ .

3 Nm _ 20 %

A B

8.5 Nm

_ 15 %

Produkt Specifikationer

Mærke:	Festo
Kategori:	Ikke kategoriseret
Model:	VABM-B10-25-G12-4-P53

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo VABM-B10-25-G12-4-P53 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Festo Manualer

Festo SIED-M18NB-ZS-S-L Manual

20 August 2025

Festo SOEG-RT-M12-PS-K-2L Manual

20 August 2025

Festo VABD-S2-1-S-C Manual

20 August 2025

Festo SIED-M18B-ZO-S-L Manual

19 August 2025

Festo VACC-S18-120-K4-27-KS4ME Manual

19 August 2025

Festo VABS-S4-1S-G14-K2 Manual

19 August 2025

Festo P.BE-CP-CO-DE Manual

19 August 2025

Festo VABS-S4-2S-G18-B-K2 Manual

19 August 2025

Festo P.BE-CP-FB5-E-FR Manual

19 August 2025

Festo P.BE-CP-DN-DE Manual

19 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ANCEL BD200 Manual

4 November 2025

Yamazen KSF-S34 Manual

4 November 2025

Hendi CombiTurbo 281277 Manual

4 November 2025

Uniprodo UNI_PBM_58 Manual

4 November 2025

Wimberley AP-603 Manual

4 November 2025

Essentiel B B-Hydro Brush Manual

4 November 2025

Cooler Master Mini 110 Manual

4 November 2025

ANCEL FX3300 ELITE Manual

4 November 2025

WALI AMM002-B Manual

4 November 2025

Eliminator Lighting Electro 64 BLED Manual

4 November 2025