Festo VABM-B10-25S-G38-5 Manual

Festo Ikke kategoriseret VABM-B10-25S-G38-5

Læs gratis den danske manual til Festo VABM-B10-25S-G38-5 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Festo VABM-B10-25S-G38-5, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Assembly instructions (Original instructions)

8067317

1701b

[8067319]

†‡

Connection block

VABM-B10-25S

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

1. Applicable documents

All available documents for the product  www.f

esto.com/pk

2. Safety

Switch off compressed air before mounting work.

Observe tigh

tening torques.

3. Intended use

Pneumatic linking of the valves.

4. Further info

rmation

Accessories for VABM  www.fes

to.com/catalogue

5. Scope of delivery

20518d_3

VABM-B10-25S-...

1 Connection block

2 Screw M4x50

1)2)

3 Screw M4x40

1)2)

4 Seal

5 Blanking plug B-3/8

(1x)

(nx)

(3x)

20518d_4

VABM-B10-25S-...-P3

1 Connection block

2 Screw M4x50

1)2)

3 Screw M4x40

1)2)

4 Seal

5 Blanking plug B-3/8

(1x)

(nx)

(2x)

6. Not in scope of delivery

20520d_3

6 Solenoid valve

VUVS-... or

pneumatic valve

VUWS-...

(nx)

The number of screws , seals 2 3/4 and valves 6 is dependent on the available valve

positions.

Number = 2 x available valve positions

7. Mounting of blanking plugs 5

20518d_8

Screw in the blanking

plugs 5 at the desired

position, as required.

Blanking plug [Nm]

5 8.5 ± 15 %

8. Mounting of connection bl

ock 1

20518d_9

Place connection block 1

on mounting surface (A).

Tighten screws (B).

9. Alignment of seal 4

20518d_11

For valves VUVS-L/LT...:

Place the seal 4 in the

depression of the valve 6

so it is positive-locking.

Observe channel

designation 1/3/5 or 1/3.

20518d_12

For valves VUVS-LK...-S:

Place seal 4 on the

valve 6. Observe channel

designation 1/3/5 or 1/3.

 Indexing hole (X) on the

valve 6 is:

– only relevant for the

connection block

VABM-B10-25S-...

– hidden according to the

alignment of the seal 4.

10. Mounting of valve 6

Information

Screws 3 can only be mounted with solenoid valves 6 VUVS-LK…-S.

20518d_10

/Push screws 2 3 into the

drill holes of the valve 6.

 Only screws 2 are

loss-protected.

Position valve 6 on the

connection block 1.

Check:

– Projection (C) is in the

slot (D)

– Valve 6 is aligned parallel

to the surface (E)

– Channel designations 1/3/5

or 1/3 agree with each

other.

Tighten screws 2 3/ .

3 Nm _ 20 %

315

Produkt Specifikationer

Mærke:	Festo
Kategori:	Ikke kategoriseret
Model:	VABM-B10-25S-G38-5

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo VABM-B10-25S-G38-5 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Festo Manualer

Festo DFPC-80-50-D Manual

17 Juni 2025

Festo DGST-20-40-PA Manual

17 Juni 2025

Festo SLS-6-30-P-A Manual

17 Juni 2025

Festo DFPC-200-350-D Manual

17 Juni 2025

Festo DFPC-250 Manual

17 Juni 2025

Festo DGST-16-20-PA Manual

17 Juni 2025

Festo EMMB-AS-40-01-K-S30MB Manual

17 Juni 2025

Festo CRDSNU-50 Manual

17 Juni 2025

Festo CRDSNU-63 Manual

17 Juni 2025

Festo PDAD-73-G1/2 Manual

17 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg CVI120GE Manual

17 Juni 2025

Panduit VS-CKP4-000 Manual

17 Juni 2025

Yamazen LTH-2BH Manual

17 Juni 2025

Philips ASH4511CH Manual

17 Juni 2025

Yamazen MNW-1890CJ Manual

17 Juni 2025

D-Link DMC-700SC Manual

17 Juni 2025

Makita DHP490 Manual

17 Juni 2025

Royal Catering RC-BFWH12030 Manual

17 Juni 2025

Makita TW011G Manual

17 Juni 2025

Philips 50BDL2050Q Manual

17 Juni 2025