Festo VABM-B10-30-G34-3-P53 Manual

Festo Ikke kategoriseret VABM-B10-30-G34-3-P53

Læs gratis den danske manual til Festo VABM-B10-30-G34-3-P53 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Festo VABM-B10-30-G34-3-P53, eller vil du spørge andre brugere om produktet?

Side 1/1
Assembly instructions (Original instructions)
8067428
1701c
[8067430]
†‡
Common supply manifold
VABM-B10-30-...-P53
Festo SE & Co. KG
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
1. Applicable documents
All available documents for the product www.f
esto.com/pk
2. Safety
Switch off compressed air before mounting work.
Observe tigh
tening torques.
3. Intended use
Pneuma
tic linking of the valves.
4. Further inf
o
rmation
Accessories for VABM www.fes
to.com/catalogue
5. Scope of delivery
21521d_1
VABM-B10-30-...-P53
1 P manifold rail
2 Blanking plug B-3/4
3 Screw M5x60
1)2)
4 Screw M5x40
1)2)
5 Screw M5
(thread-cutting)
6 Mounting bracket
7 Seal
1)
8 Distance ring
(1x)
(1x)
(nx)
(nx)
(8x)
(2x)
(nx)
(2x)
21521d_2
VABM-B10-30-...-P53-E
1 P manifold rail
2 Blanking plug B-3/4
3 Screw M5x60
1)2)
4 Screw M5x40
1)2)
5 Screw M5
(thread-cutting)
6 Mounting bracket
7 Seal
1)
8 Distance ring
(1x)
(1x)
(nx)
(nx)
(4x)
(1x)
(nx)
(1x)
6. Not in scope of d
e
livery
2148
1d
_9
9 Solenoid valve
VUVS-... or
pneumatic valve
VUWS-...
1)
(nx)
2152
1d
_9
aJ Push-in fitting (nx)
1)
The number of screws , seals 3 4/7 and valves 9 is dependent on the available valve
positions.
2)
Number = 2 x available valve positions
7. Mounting the mounting bracket 6
6
6
66
7a. VABM-B10-30-...-P53
2152
1d
_3
Define alignment of the
P manifold rail 1.
Information
The adjustment of the 0° and 30° angle of the common supply manifold 1
on a flat surface is dependent on the length of the silencer.
2152
1d
_5
Place both mounting
brackets 6 on the
P manifold rail 1.
Tighten all screws 5. If you
screw it in again, use the
threads already present.
7b. VABM-B
10-30-
...-P53-E
21521d_4
Define alignment of the
P manifold rail 1.
2152
1d
_6
Place the mounting
bracket 6 on the common
supply manifold 1.
Tighten all screws 5. If you
screw it in again, use the
threads already present.
8. Mounting the b
l
anking plug 2
2
2
22 and push-in fitting aJ
aJ
aJ
aJaJ
2152
1d
_7
Screw the blanking plug 2
in at the desired position,
as required.
Screw in the push-in
fitting aJ.
Information
One distance ring 8 each is required when mounting the push-in fittings
QS-G3/4-22 and CQ-3/4-22.
9. Mounting valve 9
9
9
99
Information
Screws 4 can only be mounted with solenoid valves 9 VUVS-LK…-S.
21521d_8
/Push screws 3 4 into the
drill holes of the valve 9.
Only screws 3 are
loss-p
r
otected.
Push seal 7 into channel 1
of the valve 9. Rotating
movement required during
mounting.
Place channel 1 of the
valve 9 onto the
opening (A).
Position the valve 9 on
the threads (B).
Tighten screws 3 4/ .
1
1
2
2
3
3
5
5
7
7
6
6
9
3 Nm _ 20 %
3 Nm _ 20 %
6 Nm _ 20 %
3
/
4
6
5
1
1
5
6
9
7
A B
1
8
8
aJ
2
35 Nm
_ 10 %
8
aJ
1
4
4


Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: VABM-B10-30-G34-3-P53

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo VABM-B10-30-G34-3-P53 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Festo Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Turbo Air

Turbo Air TBC-65SB-N6 Manual

2 September 2025
XPower

XPower BR-282A Manual

2 September 2025
Grunkel

Grunkel SAN-GRILLNG Manual

2 September 2025
AVer

AVer DL10 Manual

2 September 2025
Rigol

Rigol HDO1204 Manual

2 September 2025
XPower

XPower A-2B Manual

2 September 2025