Festo VAMC-B10-20-CH2 Manual

Festo Ikke kategoriseret VAMC-B10-20-CH2

Læs gratis den danske manual til Festo VAMC-B10-20-CH2 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 46 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 23.5 anmeldelser. Har du et spørgsmål om Festo VAMC-B10-20-CH2, eller vil du spørge andre brugere om produktet?

Side 1/2
Montageanleitung (Original: de)
8031237
1311NH
†‡
Abdeckkappe
VAMC-B10-20-CH2
Festo SE & Co. KG
Postfach
73726 Esslingen
Deutschland
+49 711 347-0
www.festo.com
1. Teileliste
19442d_1
1 Abdeckkappe (10x)
19442d_2
Nicht im Lieferumfang:
2 Magnetventil
VUVS-L20/25/30,
VSNC
(1x)
2. Bestimmungsgemäße Verwendung
Abdeckkappe VAMC-B10-20-CH2:
Manuelle tastende Betätigung des Magnetventils 2 ( Abschnitt 4a).
Sperrung der manuellen Betätigung des Magnetventils Abschnitt 4b). 2 (
3. Hinweise zur Montage
Hinweis
Funktionsstörung durch unsachgemäße Montage.
Druckluft vor Montagearbeiten abschalten.
Handhilfsbetätigung (A) vor
der Montage auf unbetätigt
stellen. unbetätigt betätigt
19442d_3
Info
Falls die Handhilfsbetätigung auf betätigt gestellt ist, rastet die Abdeckkap-
pe 1 nicht ein.
4. Montage
4a. Montage für tastende Betätigung
19442d_5
Abdeckkappe 1 wie darge-
stellt montieren
(Hinweis).
Kontrolle:
Öffnung (B) ist dem Magne-
ten (C) abgewandt.
19442d_7
Schraubendreher (D) zur Be-
tätigung in Pfeilrichtung
bewegen.
4b. Montage als Sperrfunktion
Info
Die Abdeckkappe 1, um 18gedreht montiert, verhindert die Betätigung.
19442d_8
Abdeckkappe 1 wie darge-
stellt montieren
(Hinweis).
Kontrolle:
Öffnung (B) ist dem Magne-
ten (C) zugewandt.
5. Demontage
19442d_6
Schraubendreher (D) in die
Öffnung (E) schieben.
Schraubendreher (D) in
Pfeilrichtung bewegen.
1
2
1
1
A
D
Klinge
3 mm
D
Klinge
3 mm
E
C
C
B
B
Assembly instructions (original: de)
8031237
1311NH
†‡
Cover cap
VAMC-B10-20-CH2
Festo SE & Co. KG
Postfach
73726 Esslingen
Germany
+49 711 347-0
www.festo.com
1. Parts list
19442d_1
1 Cover cap (10x)
19442d_2
Not included in delivery:
2 Solenoid valve
VUVS-L20/25/30,
VSNC
(1x)
2. Intended use
Cover cap VAMC-B10-20-CH2:
Manual non-detenting actuation of the solenoid valve 2 ( section 4a).
Blocking the manual actuation of the solenoid valve 2 ( section 4b).
3. Notes on assembly
Note
Malfunction due to incorrect assembly.
Switch off compressed air before assembly work.
Set manual override (A) to
unactuated prior to assem-
bly. unactuated actuated
19442d_3
Information
If the manual override is set to actuated, the cover cap 1 will not engage.
4. Assembly
4a. Assembly for non-detenting actuation
19442d_5
Mount cover cap 1 as
shown
(Note).
Check:
Orifice (B) is located on the
opposite side to magnet (C).
19442d_7
To actuate, move screw-
driver (D) in the direction of
the arrow.
4b. Assembly as a blocking function
Information
When mounted and rotated by 180°, the cover cap 1 prevents actuation.
19442d_8
Mount cover cap 1 as
shown
(Note).
Check:
Orifice (B) is located on the
side facing magnet (C).
5. Dismantling
19442d_6
Insert screwdriver (D) into
the orifice (E).
Move screwdriver (D) in the
direction of the arrow.
1
2
1
1
A
D
Blade
3 mm
D
Blade
3 mm
E
C
C
B
B


Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: VAMC-B10-20-CH2

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo VAMC-B10-20-CH2 stil et spørgsmål nedenfor, og andre brugere vil svare dig