Festo VAOH-P15-H13 Manual

Festo Ikke kategoriseret VAOH-P15-H13

Læs gratis den danske manual til Festo VAOH-P15-H13 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Festo VAOH-P15-H13, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Translation of the original instructions

1 Further applicable documents

All available documents for the product www.festo.com/pk.è

2 Safety

2.1 General safety instructions

– Take into consideration the ambient conditions at the location of use.

– Only use the product in original status without unauthorised modifications.

– Observe labelling on the product.

– Observe further applicable documents.

– Store the product in a cool, dry, UV-protected and corrosion-protected envir-

onment. Ensure that storage times are kept to a minimum.

2.2 Intended use

The control element VAOH is intended for operation in the balancer kit YHBP.

2.3 Training of skilled personnel

Installation, commissioning, maintenance and disassembly should only be con-

ducted by qualified personnel.

The skilled personnel must be familiar with the installation of pneumatic control

systems.

3 Additional information

– Accessories www.festo.com/catalogue.è

– Spare parts www.festo.com/spareparts.è

4 Service

Contact your regional Festo contact person if you have technical questions

èwww.festo.com.

5 Product overview

5.1 Function

By extending and retracting the handle on the control element, an

overpressure/partial vacuum is generated at pneumatic connection of the cyl-2

inder. Using a connected pressure regulator, it is possible to specify the speed of

cylinder movement at the balancer kit by means of the size of the pressure value.

The home position (mid-position) on the control element takes place by spring

return.

5.2 Design

1Mounting thread M8 (at both ends)

2Pneumatic connection

3Handle

4Slot for proximity sensor

Fig. 1

6 Assembly

• Mount control element at the intended position. The permissible tightening

torque is max. 10Nm.

The control element can be installed with the handle at the top or at the bot-

tom. For intuitive operation, the control element should always be aligned in

the movement direction of the balancer kit.

7 Pneumatic installation

• Connect tubing between connection and the corresponding connection on2

the pressure regulator of the balancer kit.

8 Malfunctions

8.1 Troubleshooting

Fault description Cause Remedy

Pressure at connection with2

handle in mid-position.

Leakage between air connec-

tion of control element and con-

nection of pressure regulator.

Check fittings and tubing are

tight.

Tab. 1

8.2 Repair

Send the product to the Festo repair service for repair.

9 Disposal

ENVIRONMENT!

Send the packaging and product for environmentally sound recycling in accord-

ance with the current regulations www.festo.com/sp.è

10 Technical data

Type code VAOH-P15-H13

Mounting position Any

Mounting thread M8 (max. screw-in depth: 27mm)1

Max. lateral force [N] 100

Position sensing For proximity sensor

Operating pressure [bar] £1

Pneumatic connection G1/82

Ambient temperature [°C] –10…+80

Product weight [g] 1350

Materials

Cylinder Anodised aluminium

Handle PA6

Note on materials Contains materials that include LABS

1) LABS = paint-wetting impairment substances

Tab. 2

8081648

Operator control element

VAOH-P15-H13

8081648

2018-02

[8081650]

Instructions| Operating

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Produkt Specifikationer

Mærke:	Festo
Kategori:	Ikke kategoriseret
Model:	VAOH-P15-H13

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo VAOH-P15-H13 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Festo Manualer

Festo SIED-M18NB-ZS-S-L Manual

20 August 2025

Festo SOEG-RT-M12-PS-K-2L Manual

20 August 2025

Festo VABD-S2-1-S-C Manual

20 August 2025

Festo SIED-M18B-ZO-S-L Manual

19 August 2025

Festo VACC-S18-120-K4-27-KS4ME Manual

19 August 2025

Festo VABS-S4-1S-G14-K2 Manual

19 August 2025

Festo P.BE-CP-CO-DE Manual

19 August 2025

Festo VABS-S4-2S-G18-B-K2 Manual

19 August 2025

Festo P.BE-CP-FB5-E-FR Manual

19 August 2025

Festo P.BE-CP-DN-DE Manual

19 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

MSW PROPULLATOR 2500MH Manual

3 November 2025

ANCEL HD3200 Manual

3 November 2025

Lantronix C3220 Manual

3 November 2025

Cooler Master MasterBox MB511 Manual

3 November 2025

Klarstein La Palma 750 Smart Manual

3 November 2025

ANCEL AD610 Elite Manual

3 November 2025

ErgoAV ERIWA1-01W Manual

3 November 2025

QOLIXm YQAWSL-6A4U Manual

3 November 2025

ANCEL AJ400 Manual

3 November 2025

Emerson ITL9907RE Manual

3 November 2025