Festo VAVE-P12-TP-5YL1-P Manual

Festo Ikke kategoriseret VAVE-P12-TP-5YL1-P

Læs gratis den danske manual til Festo VAVE-P12-TP-5YL1-P (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Festo VAVE-P12-TP-5YL1-P, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

VAVE-P...-TP

Electronics module

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Deutschland

+49 711 347-0

www.festo.com

Operating instructions

8154158

2021-03a

[8154160]

Translation of the original instructions

1 About this document

1.1 Applicable documents

All available documents for the product

è www.festo.com/sp.

Document Product Table of contents

Operating instructions Piezo valve VEMP-BS-3 –

Operating instructions Piezo valve VEAE-BB-6-...-X4 –

Tab. 1: Applicable documents

1.2 Product labelling

Warning symbols on the product

If the housing is damaged, protection against dangerous voltages is no longer guaran-

teed.

Dangerous voltages up to 310 V are generated during operation.

Tab. 2: Meaning of the warning symbols

Fig. 1: Position of the warning symbols

2 Safety

2.1 Safety instructions

–Only use the product in original status without unauthorised modifications.

–Only use the product if it is in perfect technical condition.

–Provide suitable protective measures against impact loads.

–Do not subject the product to mechanical stress.

–Take into consideration the ambient conditions at the location of use.

–Before working on the product, switch off the power supply and secure it

against being switched on again.

–Do not damage product labels and warning symbols.

2.2 Intended use

The electronics module is intended for the control and power supply of Festo

piezo valves.

Electronics module with electrical plug-in

base

for piezo valve

VAVE-P12-TP-5YL1-P – VEMP

NEFV-V13-XX4G3-T1G3 VEMR

NEFV-V14-XX4G3-T1G3 VEAE

VAVE-P17-TP-5YL1-P – VEMC

Tab. 3: Use of the electronics module

2.3 Training of qualified personnel

Work on the product may only be carried out by qualified personnel who can

evaluate the work and detect dangers. The qualified personnel have skills and

experience in dealing with electrical (open-loop) control technology.

3 Additional information

–Contact the regional Festo contact if you have technical problems

è www.festo.com.

–Accessories è www.festo.com/catalogue.

4 Product range overview

4.1 Scope of delivery

Fig.2

Electronics module (1x)

VAVE-P...-TP

4.2 Not in scope of delivery

2 3 4

5 6 7

Fig.3

Piezo valve (1x)

VEMP

Piezo valve (1x … 2x)

VEMR

Piezo valve (1x … 2x)

VEAE

Piezo valve (1x)

VEMC

Electrical plug-in base (1x)

NEFV-V13-XX4G3-T1G3

(for piezo valves VEMR)

Electrical plug-in base (1x)

NEFV-V14-XX4G3-T1G3

(for piezo valves VEAE)

Fig.4

H-rail (1x)

60715 TH35-...

4.3 Function

The electronics module is a two-channel, unregulated piezo controller with inte-

grated high-voltage generation for piezo valves.

5 Transport and storage

–Store the product in a cool, dry environment protected from UV and corrosion.

Keep storage times short.

6 Assembly

6.1 Combination of VAVE-P12-TP with piezo valve VEMP

Fig.5

Electronics module

Piezo valve

Sub-base

Socket

1. Mount the piezo valve on the sub-base

è 1.1 Applicable documents.

2. Push the piezo valve plug into the socket to the stop.

3. Lock socket to prevent loosening.

6.2 Combination of VAVE-P12-TP with piezo valve VEMR

Fig.6

Electronics module

Electrical plug-in base

Socket

Screw

1. Select screw suitable for the installation situation. Screw size: M3

2. Mount the electrical plug-in base on the mounting surface using the screw.

Tightening torque: 0.5 Nm ± 5%

3. Push the socket onto the plug of the electrical plug-in base.

4. Lock socket to prevent loosening.

Fig.7

Piezo valve

Electrical plug-in base

1. Note the position of piezo valve slots 1 and 2 on the electrical plug-in base.

2. Insert the flex conductor of the piezo valves into the electrical plug-in base.

6.3 Combination of VAVE-P12-TP with piezo valve VEAE

Fig.8

Electronics module

Electrical plug-in base

Socket

Screw

1. Select screw suitable for the installation situation. Screw size: M3

2. Mount the electrical plug-in base on the mounting surface using the screw.

Tightening torque: 0.5 Nm ± 5%

3. Push the socket onto the plug of the electrical plug-in base.

4. Lock socket to prevent loosening.

Fig.9

Piezo valve

Electrical plug-in base

Sub-base

1. Note the position of piezo valve slots 1 and 2 on the electrical plug-in base.

2. Mount the piezo valves on the sub-bases

è 1.1 Applicable documents.

3. Insert the flex conductor of the piezo valves into the electrical plug-in base.

6.4 Combination of VAVE-P17-TP with piezo valve VEMC

Fig.10

Electronics module

Piezo valve

Socket

1. Push the piezo valve plug into the socket to the stop.

2. Lock socket to prevent loosening.

7 Mounting

7.1 H-rail mounting

Fig.11

Electronics module

H-rail

Hook

Lug

1. Mount H-rail horizontally.

2. Attach the electronics module to the top edge of the H-rail.

ÄThe hook is located behind the upper edge of the H-rail.

3. Press electronics module downwards.

4. Swivel electronics module against the H-rail.

ÄLug clips behind the lower edge of the H-rail.

7.2 Wall mounting

Fig.12

Electronics module

Screw

1. Select screws suitable for the installation situation. Screw size: M3

2. Mount the electronics module on the mounting surface with two screws.

Tightening torque: 0.5 Nm ± 5%

8 Electrical installation

WARNING

Risk of Injury due to Electric Shock.

• For the electric power supply, use only PELV circuits that ensure a reliable

electric disconnection from the mains network.

• Observe IEC 60204-1/EN 60204-1.

• The unit must be powered by a power source that fulfils the requirements of an

energy-limited circuit in accordance with IEC 61010-1/EN 61010-1.

WARNING

Risk of injury due to electric shock.

If the housing is damaged, protection against dangerous voltage is no longer

guaranteed.

• Do not start the device.

• Immediately shut down the device.

1. Install electrical connecting cables without crushing, kinking or stretching

them.

2. Connect field device side.

Socket

Pin Signal

VAVE-P12-TP VAVE-P17-TP

1 GND 0 … 310 V, channel 1

2 0 … 310 V, channel 1 GND

3 0 … 310 V, channel 2 0 … 310 V, channel 2

3. Connect controller side.

Produkt Specifikationer

Mærke:	Festo
Kategori:	Ikke kategoriseret
Model:	VAVE-P12-TP-5YL1-P

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo VAVE-P12-TP-5YL1-P stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Festo Manualer

Festo KYC-63 Manual

9 Juli 2025

Festo NEBM-L10G14-EH-5-Q7N-LE12 Manual

8 Juli 2025

Festo CPX-E-8DO Manual

8 Juli 2025

Festo CRDSNU-20-80-P-A Manual

8 Juli 2025

Festo CRDSNU-16-10-P-A Manual

8 Juli 2025

Festo CPV-SC-FB-VI Manual

7 Juli 2025

Festo CRDSNU-B-16-50-P-A-MG-A1 Manual

7 Juli 2025

Festo NEBM-L10G14-EH-10-Q7N-LE12 Manual

7 Juli 2025

Festo CPX-CTEL-4-M12-5POL Manual

7 Juli 2025

Festo CRDSNU-B-25-25-PPS-A-MG-A1 Manual

7 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Biltema 18-688 Manual

11 Juli 2025

Segway Ninebot KickScooter F40D II Manual

11 Juli 2025

Microchip MCP48FVB08 Manual

11 Juli 2025

Pulsar AWO654 Manual

11 Juli 2025

Unitech MS282 Manual

11 Juli 2025

Oladance OWS Sports Manual

11 Juli 2025

Nivian NVS-S7B Manual

11 Juli 2025

Danfoss DST X510 Manual

11 Juli 2025

Danfoss PVED-CC Manual

11 Juli 2025

Miniland NaturRound Bunny 89272 Manual

11 Juli 2025