Festo VMPA14-B8-R1C2-C-10 Manual

Festo Ikke kategoriseret VMPA14-B8-R1C2-C-10

Læs gratis den danske manual til Festo VMPA14-B8-R1C2-C-10 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Festo VMPA14-B8-R1C2-C-10, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

VMPA...-B8-R...

Regulator plate

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Deutschland

+49 711 347-0

www.festo.com

Assembly instructions

8150097

2021-08d

[8150099]

Translation of the original instructions

Applicable documents

All available documents for the product

www.festo.com/sp.

2 Safety

2.1 Safety instructions

–

Only use the product in its original condition without unauthorised modifica-

tions.

–

Only use the product if it is in perfect technical condition.

–

Before working on the product, switch off the compressed air supply and lock it

to prevent it from being switched on again.

2.2 Intended use

The regulator plate regulates the operating pressure or working pressure of the

solenoid valves.

2.3

Training of qualified personnel

Work on the product may only be carried out by qualified personnel who can

evaluate the work and detect dangers. The qualified personnel have knowledge

and experience in pneumatics.

3 Additional information

–

Contact the regional Festo contact if you have technical problems

www.festo.com.

4 Product Range Overview

4.1 Scope of delivery

Fig.1

Regulator plate (1x)

VMPA...-B8-R...

Screw (2x)

4.2 Not in scope of delivery

Fig.2

Solenoid valve (1x)

VMPA...-M1H-...-PI

5 Assembly

5.1 Preparation for VMPA1-B8-R... and VMPA14-B8-R...

Fig.3

• Push the fibre optic cable extension onto the electronics module .4 5

5.2 Assembly

Fig.4

•

Unscrew the captive screws of the solenoid valve .6 3

Fig.5

Check that the conical ring seal is positioned correctly.7

The tapered side is at the bottom

Check that the seal is positioned correctly.8

The seal is in the slot of the solenoid valve 3

3. Place the solenoid valve on the regulator plate .3 1

Fig.6

1. Check that the conical ring seal is positioned correctly.9

The tapered side is at the bottom

2. Check that the seal is positioned correctly.aJ

The seal is in the slot of the regulator plate 1

3. Place the regulator plate on the electronics module .1 aA

Fig.7

• Tighten the screws . Observe the tightening torque.2

Solenoid valve Screw Tightening torque

VMPA1-M1H-...U-PI M2x40 0.25 Nm ± 10 %

VMPA1-M1H-...-PI M2x43 0.25 Nm ± 10 %

VMPA14-M1H-...-PI M2.5x45 0.65 Nm ± 10 %

VMPA2-M1H-...-PI M3x57.5 0.65 Nm ± 10 %

Produkt Specifikationer

Mærke:	Festo
Kategori:	Ikke kategoriseret
Model:	VMPA14-B8-R1C2-C-10

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo VMPA14-B8-R1C2-C-10 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Festo Manualer

Festo SIED-M18NB-ZS-S-L Manual

20 August 2025

Festo SOEG-RT-M12-PS-K-2L Manual

20 August 2025

Festo VABD-S2-1-S-C Manual

20 August 2025

Festo SIED-M18B-ZO-S-L Manual

19 August 2025

Festo VACC-S18-120-K4-27-KS4ME Manual

19 August 2025

Festo VABS-S4-1S-G14-K2 Manual

19 August 2025

Festo P.BE-CP-CO-DE Manual

19 August 2025

Festo VABS-S4-2S-G18-B-K2 Manual

19 August 2025

Festo P.BE-CP-FB5-E-FR Manual

19 August 2025

Festo P.BE-CP-DN-DE Manual

19 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kimo LR 110 Manual

2 September 2025

HMS Premium LPD02 Manual

2 September 2025

AVer E1008 Manual

2 September 2025

Biltema 17-547 Manual

2 September 2025

Groen AH/1E Manual

2 September 2025

ACOPower HY-P30 Manual

2 September 2025

Yamaha True X Speaker 3A WS-X3A Manual

2 September 2025

Globe RG30 Manual

2 September 2025

Deye SUN-6K-SG05LP1-EU-AM2-P Manual

2 September 2025

Neutrik NLT4FXX Manual

2 September 2025